IR2132STRPBF vs IR2132SPBF Pengandingan
Pengandingan Sisi Kiri Sisi Kanan Terperinci IR2132STRPBF disebabkan oleh Infineon dan IR2132SPBF disebabkan oleh Infineon. Bandingkan spesifikasi utama, parameter elektrik, pakej, status kehidupan, harga, dan keupayaan untuk menentukan komponen terbaik untuk keperluan disenjaya anda.
Pengandingan Spesifikasi
| Parametr | IR2132STRPBF | IR2132SPBF |
|---|---|---|
| Merek | Infineon | Infineon |
| Kategori | Power MOSFET Drivers | Power MOSFET Drivers |
| Status Lingkungan Hidup | Aktif | Aktif |
| Configuration | 3-Phase Bridge | Inverting input |
| Driver Type | Half-Bridge Gate Driver, Inverting Input | — |
| Number of Drivers | 6 (3 high-side + 3 low-side) | — |
| Offset Voltage (Max) | 600 V | — |
| Gate Drive Supply Voltage (VCC) | 10 V to 20 V | 10 V to 20 V |
| Source Current (Typ.) | 250 mA | — |
| Sink Current (Typ.) | 500 mA | — |
| Propagation Delay (Typ.) | 675 ns | — |
| Internal Dead-Time (Typ.) | 0.8 µs | — |
| Input Logic | Inverting (HIN/LIN active-low) | — |
| Bootstrap Architecture | Yes (floating high-side channel) | — |
| Undervoltage Lockout (UVLO) | Yes, on all channels | Yes, all 6 channels |
| Over-Current Protection | Yes, with ITRIP input and FAULT output | — |
| Integrated Op-Amp | Yes (current-sense amplifier) | — |
| Fault Output | Yes, active-low latched FAULT pin | — |
| dV/dt Immunity | Yes (negative transient tolerant) | Yes |
| Kemasan | 28-SOICWB (0.295 inch / 7.50 mm width) | 28-SOIC (Wide Body, 7.50 mm) |
| Jenis Pemasangan | Surface Mount | Surface Mount |
| Gambaran Suhu Operasi | [DATA_NEEDED: operating temperature range] | -40C to +125C |
| Status RoHS | Compliant (PBF suffix) | — |
| Part Number | — | IR2132SPBF |
| Manufacturer | — | Infineon Technologies (formerly International Rectifier) |
| Fungsi | — | Half-Bridge Gate Driver IC (3-phase, 6-channel) |
| Bilangan Output | — | 6 (3 high-side, 3 low-side) |
| Maximum Offset Voltage (High-Side) | — | 600 V |
| Output Current (Source/Sink) | — | 0.5 A |
| Logic Input Compatibility | — | CMOS/LSTTL, down to 2.5 V logic |
| Typical Deadtime | — | 0.8 us |
| Bootstrap Design | — | Required for high-side channels |
| Negative VS Transient Tolerance | — | Yes |
| Lead-Free / RoHS | — | Yes (PbF suffix, RoHS compliant) |
| Packaging | — | Tube |
| Tetstruktur | — | 3-phase bridge driver for MOSFETs/IGBTs |