LM2903VQDRQ1 vs LM293DG Perbandingan
Perbandingan bersamaan detil LM2903VQDRQ1 dari Texas Instruments dan LM293DG dari onsemi. Bandingkan spesifikasi penting, parameter listrik, pengemasan, status cycle, harga, dan ketersediaan untuk menentukan komponen terbaik untuk kebutuhan desain Anda.
Texas Instruments
LM2903VQDRQ1 - 36V Dual Automotive Comparator | Texas Instruments
LM2903VQDRQ1 ✓ AktifPerbandingan Spesifikasi
| Parameter Umum | LM2903VQDRQ1 | LM293DG |
|---|---|---|
| Merek | Texas Instruments | onsemi |
| Kategori | Amplifier ICs | Amplifier ICs |
| Status Lingkungan Hidup | Aktif | Aktif |
| Comparator Type | Dual differential comparator | Precision, dual, independent |
| Number of Channels | 2 channels | — |
| Tipe Output | Open-collector | Open-collector / open-drain |
| Supply Voltage Range, Single Supply | 2 V to 36 V | — |
| Supply Voltage Range, Dual Supply | ±1 V to ±18 V | — |
| Differential Input Voltage Range | Up to maximum-rated supply voltage | — |
| Common-Mode Input Voltage Range | Includes ground | — |
| Supply-Current Drain | 0.4 mA | — |
| Propagation Delay | Approximately 1.3 µs | — |
| Logic Compatibility | TTL, MOS, and CMOS compatible | — |
| Automotive Qualification | AEC-Q100 Grade 0 and Grade 1 | — |
| Rentang Suhu Kerja | -40 °C to +125 °C | -25 C to +85 C |
| Paket | 8-pin SOIC (D) | 8-SOIC (SOIC-8), 1.27 mm lead pitch |
| Package Width | 3.90 mm | — |
| Package Length | 0.154 inch | — |
| Tipe Mounting | Surface mount | Surface Mount |
| Status RoHS | [DATA_NEEDED: RoHS status] | — |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| Lead-Free Status | [DATA_NEEDED: lead-free status] | — |
| Number of Comparators | — | 2 |
| Supply Voltage Range | — | 2 V to 36 V |
| Input Offset Voltage | — | as low as 2.0 mV |
| Response Time | — | 1.3 microseconds |
| Arus Pemuat | — | 400 microamps |
| Output Compatibility | — | CMOS, MOS, TTL, DTL, ECL |
| Common-Mode Input Range | — | Includes ground (single supply operation) |
| Channel Independence | — | Fully independent channels |
| Input Common-Mode Range | — | Ground to (V+) - 1.5 V (typical single-supply behaviour) |
| Output Sink Current | — | [DATA_NEEDED: output sink current rating] |
| Input Bias Current | — | [DATA_NEEDED: input bias current] |
| Input Differential Voltage Range | — | [DATA_NEEDED: input differential voltage range] |
| Lead-Free / RoHS Status | — | [DATA_NEEDED: lead-free and RoHS status] |