LM2903VQDRQ1 vs LM293DG Karşılaştırma
Ayrıntılı yan yana karşılaştırma LM2903VQDRQ1 tarafından Texas Instruments ve LM293DG tarafından onsemiAnahtar özellikleri, elektriksel parametreleri, ambalajı, yaşam döngüsü durumu, fiyatlandırma ve mevcudiyeti karşılaştırarak tasarım gereksinimleriniz için en iyi bileşeni belirleyin.
Texas Instruments
LM2903VQDRQ1 - 36V Dual Automotive Comparator | Texas Instruments
LM2903VQDRQ1 ✓ AktifÖzellik Karşılaştırması
| Parametre | LM2903VQDRQ1 | LM293DG |
|---|---|---|
| Marka | Texas Instruments | onsemi |
| Kategori | Amplifier ICs | Amplifier ICs |
| Yaşam Döngüsü Durumu | Aktif | Aktif |
| Comparator Type | Dual differential comparator | Precision, dual, independent |
| Number of Channels | 2 channels | — |
| Çıkış Türü | Open-collector | Open-collector / open-drain |
| Supply Voltage Range, Single Supply | 2 V to 36 V | — |
| Supply Voltage Range, Dual Supply | ±1 V to ±18 V | — |
| Differential Input Voltage Range | Up to maximum-rated supply voltage | — |
| Common-Mode Input Voltage Range | Includes ground | — |
| Supply-Current Drain | 0.4 mA | — |
| Propagation Delay | Approximately 1.3 µs | — |
| Logic Compatibility | TTL, MOS, and CMOS compatible | — |
| Automotive Qualification | AEC-Q100 Grade 0 and Grade 1 | — |
| İşletim Sıcaklığı Aralığı | -40 °C to +125 °C | -25 C to +85 C |
| Paket | 8-pin SOIC (D) | 8-SOIC (SOIC-8), 1.27 mm lead pitch |
| Package Width | 3.90 mm | — |
| Package Length | 0.154 inch | — |
| Montaj Türü | Surface mount | Surface Mount |
| RoHS Durumu | [DATA_NEEDED: RoHS status] | — |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| Lead-Free Status | [DATA_NEEDED: lead-free status] | — |
| Number of Comparators | — | 2 |
| Supply Voltage Range | — | 2 V to 36 V |
| Input Offset Voltage | — | as low as 2.0 mV |
| Response Time | — | 1.3 microseconds |
| Besleme Akımı | — | 400 microamps |
| Output Compatibility | — | CMOS, MOS, TTL, DTL, ECL |
| Common-Mode Input Range | — | Includes ground (single supply operation) |
| Channel Independence | — | Fully independent channels |
| Input Common-Mode Range | — | Ground to (V+) - 1.5 V (typical single-supply behaviour) |
| Output Sink Current | — | [DATA_NEEDED: output sink current rating] |
| Input Bias Current | — | [DATA_NEEDED: input bias current] |
| Input Differential Voltage Range | — | [DATA_NEEDED: input differential voltage range] |
| Lead-Free / RoHS Status | — | [DATA_NEEDED: lead-free and RoHS status] |