LM2903VQDRQ1 vs LM293DG موازنہ
تفصیلی ساتھ ساتھ موازنہ از LM2903VQDRQ1 بذریعہ Texas Instruments اور LM293DG بذریعہ onsemi. اہم خصوصیات، برقی پیرامیٹرز، پیکیجنگ، لائف سائیکل اسٹیٹس، قیمتوں اور دستیابی کا موازنہ کریں تاکہ آپ کی ڈیزائن ضروریات کے لیے بہترین کمپوننٹ کا تعین ہو سکے۔
Texas Instruments
LM2903VQDRQ1 - 36V Dual Automotive Comparator | Texas Instruments
LM2903VQDRQ1 ✓ فعالخصوصیات کا موازنہ
| پیرامیٹر | LM2903VQDRQ1 | LM293DG |
|---|---|---|
| برانڈ | Texas Instruments | onsemi |
| زمرہ | Amplifier ICs | Amplifier ICs |
| لائف سائیکل کی حالت | فعال | فعال |
| Comparator Type | Dual differential comparator | Precision, dual, independent |
| Number of Channels | 2 channels | — |
| آؤٹ پٹ کی قسم | Open-collector | Open-collector / open-drain |
| Supply Voltage Range, Single Supply | 2 V to 36 V | — |
| Supply Voltage Range, Dual Supply | ±1 V to ±18 V | — |
| Differential Input Voltage Range | Up to maximum-rated supply voltage | — |
| Common-Mode Input Voltage Range | Includes ground | — |
| Supply-Current Drain | 0.4 mA | — |
| Propagation Delay | Approximately 1.3 µs | — |
| Logic Compatibility | TTL, MOS, and CMOS compatible | — |
| Automotive Qualification | AEC-Q100 Grade 0 and Grade 1 | — |
| آپریٹنگ درجہ حرارت رینج | -40 °C to +125 °C | -25 C to +85 C |
| پیکیج | 8-pin SOIC (D) | 8-SOIC (SOIC-8), 1.27 mm lead pitch |
| Package Width | 3.90 mm | — |
| Package Length | 0.154 inch | — |
| ماؤنٹنگ ٹائپ | Surface mount | Surface Mount |
| RoHS اسٹیٹس | [DATA_NEEDED: RoHS status] | — |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| Lead-Free Status | [DATA_NEEDED: lead-free status] | — |
| Number of Comparators | — | 2 |
| Supply Voltage Range | — | 2 V to 36 V |
| Input Offset Voltage | — | as low as 2.0 mV |
| Response Time | — | 1.3 microseconds |
| سپلائی کرنٹ | — | 400 microamps |
| Output Compatibility | — | CMOS, MOS, TTL, DTL, ECL |
| Common-Mode Input Range | — | Includes ground (single supply operation) |
| Channel Independence | — | Fully independent channels |
| Input Common-Mode Range | — | Ground to (V+) - 1.5 V (typical single-supply behaviour) |
| Output Sink Current | — | [DATA_NEEDED: output sink current rating] |
| Input Bias Current | — | [DATA_NEEDED: input bias current] |
| Input Differential Voltage Range | — | [DATA_NEEDED: input differential voltage range] |
| Lead-Free / RoHS Status | — | [DATA_NEEDED: lead-free and RoHS status] |