LM2903VQDRQ1 vs LM293DG Pengandingan
Pengandingan Sisi Kiri Sisi Kanan Terperinci LM2903VQDRQ1 disebabkan oleh Texas Instruments dan LM293DG disebabkan oleh onsemi. Bandingkan spesifikasi utama, parameter elektrik, pakej, status kehidupan, harga, dan keupayaan untuk menentukan komponen terbaik untuk keperluan disenjaya anda.
Texas Instruments
LM2903VQDRQ1 - 36V Dual Automotive Comparator | Texas Instruments
LM2903VQDRQ1 ✓ AktifPengandingan Spesifikasi
| Parametr | LM2903VQDRQ1 | LM293DG |
|---|---|---|
| Merek | Texas Instruments | onsemi |
| Kategori | Amplifier ICs | Amplifier ICs |
| Status Lingkungan Hidup | Aktif | Aktif |
| Comparator Type | Dual differential comparator | Precision, dual, independent |
| Number of Channels | 2 channels | — |
| Jenis Output | Open-collector | Open-collector / open-drain |
| Supply Voltage Range, Single Supply | 2 V to 36 V | — |
| Supply Voltage Range, Dual Supply | ±1 V to ±18 V | — |
| Differential Input Voltage Range | Up to maximum-rated supply voltage | — |
| Common-Mode Input Voltage Range | Includes ground | — |
| Supply-Current Drain | 0.4 mA | — |
| Propagation Delay | Approximately 1.3 µs | — |
| Logic Compatibility | TTL, MOS, and CMOS compatible | — |
| Automotive Qualification | AEC-Q100 Grade 0 and Grade 1 | — |
| Gambaran Suhu Operasi | -40 °C to +125 °C | -25 C to +85 C |
| Kemasan | 8-pin SOIC (D) | 8-SOIC (SOIC-8), 1.27 mm lead pitch |
| Package Width | 3.90 mm | — |
| Package Length | 0.154 inch | — |
| Jenis Pemasangan | Surface mount | Surface Mount |
| Status RoHS | [DATA_NEEDED: RoHS status] | — |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| Lead-Free Status | [DATA_NEEDED: lead-free status] | — |
| Number of Comparators | — | 2 |
| Supply Voltage Range | — | 2 V to 36 V |
| Input Offset Voltage | — | as low as 2.0 mV |
| Response Time | — | 1.3 microseconds |
| Arus Pemberi Arus | — | 400 microamps |
| Output Compatibility | — | CMOS, MOS, TTL, DTL, ECL |
| Common-Mode Input Range | — | Includes ground (single supply operation) |
| Channel Independence | — | Fully independent channels |
| Input Common-Mode Range | — | Ground to (V+) - 1.5 V (typical single-supply behaviour) |
| Output Sink Current | — | [DATA_NEEDED: output sink current rating] |
| Input Bias Current | — | [DATA_NEEDED: input bias current] |
| Input Differential Voltage Range | — | [DATA_NEEDED: input differential voltage range] |
| Lead-Free / RoHS Status | — | [DATA_NEEDED: lead-free and RoHS status] |