MMA8452QR1 vs MMA9553LR1 Perbandingan

Perbandingan bersamaan detil MMA8452QR1 dari NXP Semiconductors dan MMA9553LR1 dari NXP Semiconductors. Bandingkan spesifikasi penting, parameter listrik, pengemasan, status cycle, harga, dan ketersediaan untuk menentukan komponen terbaik untuk kebutuhan desain Anda.

Perbandingan Spesifikasi

Parameter Umum MMA8452QR1 MMA9553LR1
Merek NXP Semiconductors NXP Semiconductors
Kategori Motion Sensors Motion Sensors
Status Lingkungan Hidup Obsolete NRND
Tipe Pengukur 3-Axis Capacitive MEMS Accelerometer —
Resolusi 12-bit / 8-bit selectable —
Full-Scale Range ±2g / ±4g / ±8g (user selectable) —
Output Interface I2C (up to 400 kHz) —
Supply Voltage (VDD) 1.91 V to 3.6 V 1.71 V to 1.89 V (typical 1.8 V)
Supply Voltage (VDDIO) 1.62 V to 3.6 V —
Laju Data Output (ODR) 0.78 Hz to 400 Hz —
Standby Current 6 uA typical —
Active Current [DATA_NEEDED: active current at 100 Hz ODR] —
Interrupt Pins 2 (INT1, INT2, programmable) —
Suhu Kerja -40 C to +85 C -40 °C to +85 °C
Paket 16-QFN (3x3 mm) with exposed pad 16-LGA (3x3 mm)
Tipe Mounting Surface Mount Surface Mount
Axes Measured X, Y, Z —
Embedded Functions Orientation, Free-fall, Motion, Transient, Pulse, FIFO —
Level MSL MSL1 per JEDEC J-STD-020 —
I2C Address 0x1D / 0x1C (configurable SA0 pin) —
Type — Accelerometer with embedded MCU (Motion-Sensing Platform)
Sensing Axes — X, Y, Z
Acceleration Range — ±2 g, ±4 g, ±8 g (selectable)
Bandwidth / Output Data Rate — 1.9 Hz to 244 Hz
Sensitivity — [DATA_NEEDED: counts/g per range]
Tipe Output — Digital (I2C/SPI)
Arus Pemuat — [DATA_NEEDED: uA at ODR]
Antarmuka — I2C / SPI-compatible
Embedded MCU — 32-bit low-power MCU
On-chip Memory — Flash (size per datasheet family)
Integrated Features — Pedometer firmware, gesture/tilt detection, sensor-hub mode
Status RoHS — Compliant

Spek dan Sumber

Buka Semua Produk Buat BOM Ajukan Diskon