MMA9553LR1 vs MMA8452QR1 Perbandingan
Perbandingan bersamaan detil MMA9553LR1 dari NXP Semiconductors dan MMA8452QR1 dari NXP Semiconductors. Bandingkan spesifikasi penting, parameter listrik, pengemasan, status cycle, harga, dan ketersediaan untuk menentukan komponen terbaik untuk kebutuhan desain Anda.
NXP Semiconductors
MMA9553LR1 - 3-Axis MEMS Accelerometer w/ MCU | NXP | Pedometer Platform
MMA9553LR1 NrndNXP Semiconductors
MMA8452QR1 - 3-Axis 12-bit Digital Accelerometer I2C | NXP | QFN-16
MMA8452QR1 ObsoletePerbandingan Spesifikasi
| Parameter Umum | MMA9553LR1 | MMA8452QR1 |
|---|---|---|
| Merek | NXP Semiconductors | NXP Semiconductors |
| Kategori | Motion Sensors | Motion Sensors |
| Status Lingkungan Hidup | NRND | Obsolete |
| Type | Accelerometer with embedded MCU (Motion-Sensing Platform) | — |
| Sensing Axes | X, Y, Z | — |
| Acceleration Range | ±2 g, ±4 g, ±8 g (selectable) | — |
| Bandwidth / Output Data Rate | 1.9 Hz to 244 Hz | — |
| Sensitivity | [DATA_NEEDED: counts/g per range] | — |
| Tipe Output | Digital (I2C/SPI) | — |
| Supply Voltage (VDD) | 1.71 V to 1.89 V (typical 1.8 V) | 1.91 V to 3.6 V |
| Arus Pemuat | [DATA_NEEDED: uA at ODR] | — |
| Antarmuka | I2C / SPI-compatible | — |
| Embedded MCU | 32-bit low-power MCU | — |
| On-chip Memory | Flash (size per datasheet family) | — |
| Integrated Features | Pedometer firmware, gesture/tilt detection, sensor-hub mode | — |
| Suhu Kerja | -40 °C to +85 °C | -40 C to +85 C |
| Paket | 16-LGA (3x3 mm) | 16-QFN (3x3 mm) with exposed pad |
| Tipe Mounting | Surface Mount | Surface Mount |
| Status RoHS | Compliant | — |
| Tipe Pengukur | — | 3-Axis Capacitive MEMS Accelerometer |
| Resolusi | — | 12-bit / 8-bit selectable |
| Full-Scale Range | — | ±2g / ±4g / ±8g (user selectable) |
| Output Interface | — | I2C (up to 400 kHz) |
| Supply Voltage (VDDIO) | — | 1.62 V to 3.6 V |
| Laju Data Output (ODR) | — | 0.78 Hz to 400 Hz |
| Standby Current | — | 6 uA typical |
| Active Current | — | [DATA_NEEDED: active current at 100 Hz ODR] |
| Interrupt Pins | — | 2 (INT1, INT2, programmable) |
| Axes Measured | — | X, Y, Z |
| Embedded Functions | — | Orientation, Free-fall, Motion, Transient, Pulse, FIFO |
| Level MSL | — | MSL1 per JEDEC J-STD-020 |
| I2C Address | — | 0x1D / 0x1C (configurable SA0 pin) |