MMA9553LR1 vs MMA8452QR1 Pengandingan
Pengandingan Sisi Kiri Sisi Kanan Terperinci MMA9553LR1 disebabkan oleh NXP Semiconductors dan MMA8452QR1 disebabkan oleh NXP Semiconductors. Bandingkan spesifikasi utama, parameter elektrik, pakej, status kehidupan, harga, dan keupayaan untuk menentukan komponen terbaik untuk keperluan disenjaya anda.
NXP Semiconductors
MMA9553LR1 - 3-Axis MEMS Accelerometer w/ MCU | NXP | Pedometer Platform
MMA9553LR1 NrndNXP Semiconductors
MMA8452QR1 - 3-Axis 12-bit Digital Accelerometer I2C | NXP | QFN-16
MMA8452QR1 ObsoletePengandingan Spesifikasi
| Parametr | MMA9553LR1 | MMA8452QR1 |
|---|---|---|
| Merek | NXP Semiconductors | NXP Semiconductors |
| Kategori | Motion Sensors | Motion Sensors |
| Status Lingkungan Hidup | NRND | Obsolete |
| Type | Accelerometer with embedded MCU (Motion-Sensing Platform) | — |
| Sensing Axes | X, Y, Z | — |
| Acceleration Range | ±2 g, ±4 g, ±8 g (selectable) | — |
| Bandwidth / Output Data Rate | 1.9 Hz to 244 Hz | — |
| Sensitivity | [DATA_NEEDED: counts/g per range] | — |
| Jenis Output | Digital (I2C/SPI) | — |
| Supply Voltage (VDD) | 1.71 V to 1.89 V (typical 1.8 V) | 1.91 V to 3.6 V |
| Arus Pemberi Arus | [DATA_NEEDED: uA at ODR] | — |
| Antaramuka | I2C / SPI-compatible | — |
| Embedded MCU | 32-bit low-power MCU | — |
| On-chip Memory | Flash (size per datasheet family) | — |
| Integrated Features | Pedometer firmware, gesture/tilt detection, sensor-hub mode | — |
| Suhu Operasi | -40 °C to +85 °C | -40 C to +85 C |
| Kemasan | 16-LGA (3x3 mm) | 16-QFN (3x3 mm) with exposed pad |
| Jenis Pemasangan | Surface Mount | Surface Mount |
| Status RoHS | Compliant | — |
| Jenis Sensus | — | 3-Axis Capacitive MEMS Accelerometer |
| Pemecahkatan | — | 12-bit / 8-bit selectable |
| Full-Scale Range | — | ±2g / ±4g / ±8g (user selectable) |
| Output Interface | — | I2C (up to 400 kHz) |
| Supply Voltage (VDDIO) | — | 1.62 V to 3.6 V |
| Tingkat Data Output (ODR) | — | 0.78 Hz to 400 Hz |
| Standby Current | — | 6 uA typical |
| Active Current | — | [DATA_NEEDED: active current at 100 Hz ODR] |
| Interrupt Pins | — | 2 (INT1, INT2, programmable) |
| Axes Measured | — | X, Y, Z |
| Embedded Functions | — | Orientation, Free-fall, Motion, Transient, Pulse, FIFO |
| Aras MSL | — | MSL1 per JEDEC J-STD-020 |
| I2C Address | — | 0x1D / 0x1C (configurable SA0 pin) |