MMA9553LR1 vs MMA8452QR1 Ikinahambing
Detalyadong pagkakahiwalay na pagkakahambing ng MMA9553LR1 sa pamamagitan ng NXP Semiconductors at MMA8452QR1 sa pamamagitan ng NXP Semiconductors. Ikinahambing ang mga pangunahing paglalarawan, mga tama ng elektriko, paakay, kalagayan ng buhay, presyo, at pagkakaroon upang makita ang pinakamahusay na komponente para sa iyong mga kinakailangang pang disenyo.
NXP Semiconductors
MMA9553LR1 - 3-Axis MEMS Accelerometer w/ MCU | NXP | Pedometer Platform
MMA9553LR1 NrndNXP Semiconductors
MMA8452QR1 - 3-Axis 12-bit Digital Accelerometer I2C | NXP | QFN-16
MMA8452QR1 ObsoletePagsanggunian na paghahambing
| Parametro | MMA9553LR1 | MMA8452QR1 |
|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors |
| Kategorya | Motion Sensors | Motion Sensors |
| Katayuan ng Lifecycle | NRND | Obsolete |
| Type | Accelerometer with embedded MCU (Motion-Sensing Platform) | — |
| Sensing Axes | X, Y, Z | — |
| Acceleration Range | ±2 g, ±4 g, ±8 g (selectable) | — |
| Bandwidth / Output Data Rate | 1.9 Hz to 244 Hz | — |
| Sensitivity | [DATA_NEEDED: counts/g per range] | — |
| Type ng Output | Digital (I2C/SPI) | — |
| Supply Voltage (VDD) | 1.71 V to 1.89 V (typical 1.8 V) | 1.91 V to 3.6 V |
| Kuru-kuryente ng Pagbibigay | [DATA_NEEDED: uA at ODR] | — |
| Interface | I2C / SPI-compatible | — |
| Embedded MCU | 32-bit low-power MCU | — |
| On-chip Memory | Flash (size per datasheet family) | — |
| Integrated Features | Pedometer firmware, gesture/tilt detection, sensor-hub mode | — |
| Temperature na Operasyon | -40 °C to +85 °C | -40 C to +85 C |
| Packhaging | 16-LGA (3x3 mm) | 16-QFN (3x3 mm) with exposed pad |
| Uri ng Pagpapasok | Surface Mount | Surface Mount |
| Tindminan RoHS | Compliant | — |
| Type ng Sensor | — | 3-Axis Capacitive MEMS Accelerometer |
| Pangangasiwaan | — | 12-bit / 8-bit selectable |
| Full-Scale Range | — | ±2g / ±4g / ±8g (user selectable) |
| Output Interface | — | I2C (up to 400 kHz) |
| Supply Voltage (VDDIO) | — | 1.62 V to 3.6 V |
| Output Rate ng Databayad (ODR) | — | 0.78 Hz to 400 Hz |
| Standby Current | — | 6 uA typical |
| Active Current | — | [DATA_NEEDED: active current at 100 Hz ODR] |
| Interrupt Pins | — | 2 (INT1, INT2, programmable) |
| Axes Measured | — | X, Y, Z |
| Embedded Functions | — | Orientation, Free-fall, Motion, Transient, Pulse, FIFO |
| Level ng MSL | — | MSL1 per JEDEC J-STD-020 |
| I2C Address | — | 0x1D / 0x1C (configurable SA0 pin) |