MMG3011NT1 vs MMG3012NT1 Perbandingan
Perbandingan bersamaan detil MMG3011NT1 dari NXP Semiconductors dan MMG3012NT1 dari NXP Semiconductors. Bandingkan spesifikasi penting, parameter listrik, pengemasan, status cycle, harga, dan ketersediaan untuk menentukan komponen terbaik untuk kebutuhan desain Anda.
Perbandingan Spesifikasi
| Parameter Umum | MMG3011NT1 | MMG3012NT1 |
|---|---|---|
| Merek | NXP Semiconductors | NXP Semiconductors |
| Kategori | RF Amplifiers | RF Amplifiers |
| Status Lingkungan Hidup | Aktif | Aktif |
| Manufacturer | NXP Semiconductors (formerly Freescale Semiconductor) | — |
| Technology | InGaP HBT (Heterojunction Bipolar Transistor) | InGaP HBT (Heterojunction Bipolar Transistor) |
| Fungsi | General-purpose amplifier (GPA) | General Purpose RF Amplifier (GPA), Class A |
| Frequency Range | 0 Hz to 6000 MHz (0-6 GHz) | 0 Hz to 6000 MHz (6 GHz) |
| Small-Signal Gain | 15 dB (typical) | 19 dB (typical, 900 MHz) |
| Output Power (P1dB) | 15 dBm (typical) | — |
| Operating Class | Class A | — |
| Input Matching | Internally matched to 50 ohms | — |
| Output Matching | Internally matched to 50 ohms | — |
| Paket | SOT-89-4 | — |
| Tipe Mounting | Surface Mount | Surface Mount |
| Number of Terminals | 4 | — |
| Package Body Material | Plastic/Epoxy | — |
| Construction | Component | — |
| Status RoHS | [DATA_NEEDED: RoHS status not confirmed in retrieved snippets] | Compliant |
| Lead-Free | [DATA_NEEDED: lead-free status not confirmed in retrieved snippets] | Yes |
| Output P1dB | — | 18.5 dBm (typical) |
| Output IP3 (OIP3) | — | [DATA_NEEDED: OIP3 value] |
| Supply Voltage (VCC) | — | [DATA_NEEDED: VCC range] |
| Arus Pemuat | — | [DATA_NEEDED: ICC typical] |
| Input Match | — | Internally matched to 50 ohms |
| Output Match | — | Internally matched to 50 ohms |
| Operating Case Temperature | — | -40 °C to +85 °C |
| Storage Temperature | — | -65 °C to +150 °C |
| Paket / Case | — | SOT-89-4 (TO-243AA), 4-pin surface mount |
| Level MSL | — | [DATA_NEEDED: MSL rating] |
| DC Blocking | — | Required on RF input and output (DC-coupled pins) |