MPX10DP vs MPX10D Perbandingan

Perbandingan bersamaan detil MPX10DP dari STMicroelectronics dan MPX10D dari NXP Semiconductors. Bandingkan spesifikasi penting, parameter listrik, pengemasan, status cycle, harga, dan ketersediaan untuk menentukan komponen terbaik untuk kebutuhan desain Anda.

Perbandingan Spesifikasi

Parameter Umum MPX10DP MPX10D
Merek STMicroelectronics NXP Semiconductors
Kategori Pressure Sensors Pressure Sensors
Status Lingkungan Hidup Aktif Aktif
Pressure Type Differential Differential
Operating Pressure Range 0 kPa to 10 kPa (0 to 1.45 PSI) 0 to 10 kPa (0 to 1.45 psi)
Maximum Overload Pressure [DATA_NEEDED: maximum overload pressure] —
Tipe Output Analog Wheatstone bridge (uncompensated) Analog differential voltage (Wheatstone bridge)
Output Voltage Span 0 mV to 35 mV at 3 V excitation —
Supply Voltage (Excitation) 3 V DC typical —
Port Configuration Dual male 0.19 in (4.93 mm) tube, axial Single side port, differential measurement
Paket / Case 4-SIP Module —
Tipe Mounting Through-Hole Through-Hole (single port on top)
Suhu Kerja [DATA_NEEDED: operating temperature range] [DATA_NEEDED: operating temperature range]
Bridge Impedance [DATA_NEEDED: input/output bridge resistance] —
Linearity [DATA_NEEDED: linearity %FS] [DATA_NEEDED: typical linearity %FS]
Temperature Compensation None (uncompensated) —
Status RoHS [DATA_NEEDED: RoHS status] Compliant
Media Compatibility Dry gases (non-corrosive) —
Full-Scale Span — 35 mV typical at 3 V supply
Tegangan Pemuat — 3 V typical
Sensitivity — approximately 3.5 mV / kPa
Offset — [DATA_NEEDED: typical offset value]
Paket — 4-SIP Module (case 344-15)
Technology — Silicon piezoresistive (MEMS strain gauge)
Compensation — Uncompensated (external conditioning required)

Spek dan Sumber

Buka Semua Produk Buat BOM Ajukan Diskon