MX30UF4G16AB vs MX30UF4G18AB Perbandingan
Perbandingan bersamaan detil MX30UF4G16AB dari Macronix dan MX30UF4G18AB dari Macronix. Bandingkan spesifikasi penting, parameter listrik, pengemasan, status cycle, harga, dan ketersediaan untuk menentukan komponen terbaik untuk kebutuhan desain Anda.
Perbandingan Spesifikasi
| Parameter Umum | MX30UF4G16AB | MX30UF4G18AB |
|---|---|---|
| Merek | Macronix | Macronix |
| Kategori | Memory ICs | Memory ICs |
| Status Lingkungan Hidup | Aktif | Aktif |
| Tipe Memori | Non-volatile NAND Flash (SLC) | Non-volatile NAND Flash (SLC) |
| Density | 4 Gbit (512 MB) | 4 Gbit (512 MiB x8) |
| Organisasi | 256 M x 16 | — |
| Supply Voltage (VCC) | 1.7 V to 1.95 V (1.8 V typical) | 1.7 V to 1.95 V (1.8 V typ) |
| Bus Width | x16 (also supports x8) | — |
| Antarmuka | Parallel / Asynchronous NAND (ONFI 1.0) | 8-bit parallel asynchronous |
| Access Time (tRC) | 25 ns (typical) | — |
| Page Size | [DATA_NEEDED: page size bytes] | 2,112 bytes (2,048 + 64 spare) or 4,320 bytes ONFI mode |
| Block Size | [DATA_NEEDED: block size / block erase granularity] | 128 KiB (64 pages x 2 KiB) [DATA_NEEDED: exact blocks-per-die count] |
| Standby Current (Sleep Mode) | 50 uA (maximum) | 50 uA max |
| Endurance (P/E Cycles) | [DATA_NEEDED: typical P/E cycles] | — |
| Data Retention | [DATA_NEEDED: typical data retention years] | [DATA_NEEDED: typical retention spec] |
| Rentang Suhu Kerja | -40C to +85C (industrial) | — |
| Paket | 63-ball VFBGA, 9 mm x 11 mm | 48-pin TSOP I (12 mm x 20 mm x 1.0 mm) for -TI; 63-VFBGA (9x11) for -XKI |
| Tipe Mounting | Surface Mount | Surface Mount |
| Status RoHS | Compliant | Compliant |
| Lead-Free | Yes | — |
| ONFI Compliance | ONFI 1.0 parameter page | ONFI 1.0 |
| Bad Block Management | External (host-managed) | — |
| ECC Support | External hardware ECC required | — |
| Cell Technology | — | Single-Level Cell (SLC), 1 bit/cell |
| Page Read Time (tR) | — | 25 ns (async, typical) [DATA_NEEDED: confirmed from datasheet v1.2 timing table] |
| Endurance (P/E cycles) | — | [DATA_NEEDED: typical endurance spec] |
| Suhu Kerja | — | -40 C to +85 C (industrial) |
| Level MSL | — | 3 [DATA_NEEDED: confirm from datasheet] |
| Lead-free | — | Yes |