MX30UF4G16AB vs MX30UF4G18AB Pengandingan
Pengandingan Sisi Kiri Sisi Kanan Terperinci MX30UF4G16AB disebabkan oleh Macronix dan MX30UF4G18AB disebabkan oleh Macronix. Bandingkan spesifikasi utama, parameter elektrik, pakej, status kehidupan, harga, dan keupayaan untuk menentukan komponen terbaik untuk keperluan disenjaya anda.
Pengandingan Spesifikasi
| Parametr | MX30UF4G16AB | MX30UF4G18AB |
|---|---|---|
| Merek | Macronix | Macronix |
| Kategori | Memory ICs | Memory ICs |
| Status Lingkungan Hidup | Aktif | Aktif |
| Jenis Ingatan | Non-volatile NAND Flash (SLC) | Non-volatile NAND Flash (SLC) |
| Density | 4 Gbit (512 MB) | 4 Gbit (512 MiB x8) |
| Organisasi | 256 M x 16 | — |
| Supply Voltage (VCC) | 1.7 V to 1.95 V (1.8 V typical) | 1.7 V to 1.95 V (1.8 V typ) |
| Bus Width | x16 (also supports x8) | — |
| Antaramuka | Parallel / Asynchronous NAND (ONFI 1.0) | 8-bit parallel asynchronous |
| Access Time (tRC) | 25 ns (typical) | — |
| Page Size | [DATA_NEEDED: page size bytes] | 2,112 bytes (2,048 + 64 spare) or 4,320 bytes ONFI mode |
| Block Size | [DATA_NEEDED: block size / block erase granularity] | 128 KiB (64 pages x 2 KiB) [DATA_NEEDED: exact blocks-per-die count] |
| Standby Current (Sleep Mode) | 50 uA (maximum) | 50 uA max |
| Endurance (P/E Cycles) | [DATA_NEEDED: typical P/E cycles] | — |
| Data Retention | [DATA_NEEDED: typical data retention years] | [DATA_NEEDED: typical retention spec] |
| Gambaran Suhu Operasi | -40C to +85C (industrial) | — |
| Kemasan | 63-ball VFBGA, 9 mm x 11 mm | 48-pin TSOP I (12 mm x 20 mm x 1.0 mm) for -TI; 63-VFBGA (9x11) for -XKI |
| Jenis Pemasangan | Surface Mount | Surface Mount |
| Status RoHS | Compliant | Compliant |
| Lead-Free | Yes | — |
| ONFI Compliance | ONFI 1.0 parameter page | ONFI 1.0 |
| Bad Block Management | External (host-managed) | — |
| ECC Support | External hardware ECC required | — |
| Cell Technology | — | Single-Level Cell (SLC), 1 bit/cell |
| Page Read Time (tR) | — | 25 ns (async, typical) [DATA_NEEDED: confirmed from datasheet v1.2 timing table] |
| Endurance (P/E cycles) | — | [DATA_NEEDED: typical endurance spec] |
| Suhu Operasi | — | -40 C to +85 C (industrial) |
| Aras MSL | — | 3 [DATA_NEEDED: confirm from datasheet] |
| Lead-free | — | Yes |