PN7161B1HN vs PN7160A1HN Perbandingan
Perbandingan bersamaan detil PN7161B1HN dari NXP Semiconductors dan PN7160A1HN dari NXP Semiconductors. Bandingkan spesifikasi penting, parameter listrik, pengemasan, status cycle, harga, dan ketersediaan untuk menentukan komponen terbaik untuk kebutuhan desain Anda.
Perbandingan Spesifikasi
| Parameter Umum | PN7161B1HN | PN7160A1HN |
|---|---|---|
| Merek | NXP Semiconductors | NXP Semiconductors |
| Kategori | RF Transceivers | RF Modules |
| Status Lingkungan Hidup | Aktif | Aktif |
| Manufacturer | NXP Semiconductors | — |
| Part Number | PN7161B1HN | — |
| Fungsi | NFC Controller (RFID Reader/Transponder IC) | — |
| Operating Frequency | 13.56 MHz | 13.56 MHz |
| Supported Protocols | FeliCa, ISO 14443, ISO 15693, MIFARE, NFC Forum, EMV L1 | FeliCa, ISO 14443, ISO 15693, MIFARE, NFC |
| Host Interface | SPI (NCI - NFC Controller Interface) | I2C (default, hardware) / SPI (EEPROM-configurable) |
| Digital Supply Voltage (VDD) | 1.65 V to 1.95 V (typical 1.8 V) | — |
| RF/Analog Supply Voltage (VBAT) | 3.0 V to 3.6 V (typical 3.3 V) | — |
| Apple ECP Support | Yes | — |
| EMV Compliance | EMV L1 Compliant | — |
| Paket | 40-VFQFN Exposed Pad | HVQFN-40 (6 x 6 x 0.85 mm) with Exposed Pad |
| Tipe Mounting | Surface Mount | Surface Mount |
| Tingkat Sensitivitas Kekeringan (MSL) | 3 | — |
| Peak Reflow Temperature | 260 C | 260 C (per JEDEC J-STD-020) |
| Status RoHS | Compliant | Compliant |
| Product Type | — | NFC Plug and Play Controller |
| NCI Version | — | NCI 2.0 (pre-loaded firmware) |
| Digital Supply Voltage | — | 1.65 V to 1.95 V (VDD) |
| Analog/RF Supply Voltage | — | 3.0 V to 3.6 V (VBAT, VBAT_PA) |
| I/O Supply Voltage | — | 1.65 V to 1.95 V (VDDIO) |
| I2C Address | — | 0x28 (7-bit) |
| RF Output Power | — | [DATA_NEEDED: TX output power dBm] |
| Antenna Pins | — | TX1, TX2 (differential); RX1, RX2 |
| Integrated MCU Core | — | ARM Cortex-M0 (ROM-resident NCI firmware) |
| Operating Modes | — | Reader/Writer, Card Emulation (P2P), Tag Detection |
| Modes of Operation | — | Active, Standby, Hard Power Down, Low-Power Polling |
| Moisture Sensitivity Level | — | MSL 3 |
| Suhu Kerja | — | -30 C to +85 C |