PN7161B1HN vs PN7160A1HN Pengandingan

Pengandingan Sisi Kiri Sisi Kanan Terperinci PN7161B1HN disebabkan oleh NXP Semiconductors dan PN7160A1HN disebabkan oleh NXP Semiconductors. Bandingkan spesifikasi utama, parameter elektrik, pakej, status kehidupan, harga, dan keupayaan untuk menentukan komponen terbaik untuk keperluan disenjaya anda.

NXP Semiconductors
PN7161B1HN PN7161B1HN - NFC Controller, 13.56MHz, NCI, VFQFN-40 | NXP

PN7161B1HN - NFC Controller, 13.56MHz, NCI, VFQFN-40 | NXP

PN7161B1HN ✓ Aktif
NXP Semiconductors
PN7160A1HN PN7160A1HN - NFC Plug & Play Controller, NCI 2.0 | NXP

PN7160A1HN - NFC Plug & Play Controller, NCI 2.0 | NXP

PN7160A1HN ✓ Aktif

Pengandingan Spesifikasi

Parametr PN7161B1HN PN7160A1HN
Merek NXP Semiconductors NXP Semiconductors
Kategori RF Transceivers RF Modules
Status Lingkungan Hidup Aktif Aktif
Manufacturer NXP Semiconductors —
Part Number PN7161B1HN —
Fungsi NFC Controller (RFID Reader/Transponder IC) —
Operating Frequency 13.56 MHz 13.56 MHz
Supported Protocols FeliCa, ISO 14443, ISO 15693, MIFARE, NFC Forum, EMV L1 FeliCa, ISO 14443, ISO 15693, MIFARE, NFC
Host Interface SPI (NCI - NFC Controller Interface) I2C (default, hardware) / SPI (EEPROM-configurable)
Digital Supply Voltage (VDD) 1.65 V to 1.95 V (typical 1.8 V) —
RF/Analog Supply Voltage (VBAT) 3.0 V to 3.6 V (typical 3.3 V) —
Apple ECP Support Yes —
EMV Compliance EMV L1 Compliant —
Kemasan 40-VFQFN Exposed Pad HVQFN-40 (6 x 6 x 0.85 mm) with Exposed Pad
Jenis Pemasangan Surface Mount Surface Mount
Tingkat sensitiviti Air Nama (MSL) 3 —
Peak Reflow Temperature 260 C 260 C (per JEDEC J-STD-020)
Status RoHS Compliant Compliant
Product Type — NFC Plug and Play Controller
NCI Version — NCI 2.0 (pre-loaded firmware)
Digital Supply Voltage — 1.65 V to 1.95 V (VDD)
Analog/RF Supply Voltage — 3.0 V to 3.6 V (VBAT, VBAT_PA)
I/O Supply Voltage — 1.65 V to 1.95 V (VDDIO)
I2C Address — 0x28 (7-bit)
RF Output Power — [DATA_NEEDED: TX output power dBm]
Antenna Pins — TX1, TX2 (differential); RX1, RX2
Integrated MCU Core — ARM Cortex-M0 (ROM-resident NCI firmware)
Operating Modes — Reader/Writer, Card Emulation (P2P), Tag Detection
Modes of Operation — Active, Standby, Hard Power Down, Low-Power Polling
Moisture Sensitivity Level — MSL 3
Suhu Operasi — -30 C to +85 C

Laporan Datasheet & Sumber

Lihat Semua Produk Buat BOQ Minta Bao Harga