PN7161B1HN vs PN7160A1HN Karşılaştırma

Ayrıntılı yan yana karşılaştırma PN7161B1HN tarafından NXP Semiconductors ve PN7160A1HN tarafından NXP SemiconductorsAnahtar özellikleri, elektriksel parametreleri, ambalajı, yaşam döngüsü durumu, fiyatlandırma ve mevcudiyeti karşılaştırarak tasarım gereksinimleriniz için en iyi bileşeni belirleyin.

NXP Semiconductors
PN7161B1HN PN7161B1HN - NFC Controller, 13.56MHz, NCI, VFQFN-40 | NXP

PN7161B1HN - NFC Controller, 13.56MHz, NCI, VFQFN-40 | NXP

PN7161B1HN ✓ Aktif
NXP Semiconductors
PN7160A1HN PN7160A1HN - NFC Plug & Play Controller, NCI 2.0 | NXP

PN7160A1HN - NFC Plug & Play Controller, NCI 2.0 | NXP

PN7160A1HN ✓ Aktif

Özellik Karşılaştırması

Parametre PN7161B1HN PN7160A1HN
Marka NXP Semiconductors NXP Semiconductors
Kategori RF Transceivers RF Modules
Yaşam Döngüsü Durumu Aktif Aktif
Manufacturer NXP Semiconductors —
Part Number PN7161B1HN —
Fonksiyon NFC Controller (RFID Reader/Transponder IC) —
Operating Frequency 13.56 MHz 13.56 MHz
Supported Protocols FeliCa, ISO 14443, ISO 15693, MIFARE, NFC Forum, EMV L1 FeliCa, ISO 14443, ISO 15693, MIFARE, NFC
Host Interface SPI (NCI - NFC Controller Interface) I2C (default, hardware) / SPI (EEPROM-configurable)
Digital Supply Voltage (VDD) 1.65 V to 1.95 V (typical 1.8 V) —
RF/Analog Supply Voltage (VBAT) 3.0 V to 3.6 V (typical 3.3 V) —
Apple ECP Support Yes —
EMV Compliance EMV L1 Compliant —
Paket 40-VFQFN Exposed Pad HVQFN-40 (6 x 6 x 0.85 mm) with Exposed Pad
Montaj Türü Surface Mount Surface Mount
Nem Hassasiyet Seviyesi (MSL) 3 —
Peak Reflow Temperature 260 C 260 C (per JEDEC J-STD-020)
RoHS Durumu Compliant Compliant
Product Type — NFC Plug and Play Controller
NCI Version — NCI 2.0 (pre-loaded firmware)
Digital Supply Voltage — 1.65 V to 1.95 V (VDD)
Analog/RF Supply Voltage — 3.0 V to 3.6 V (VBAT, VBAT_PA)
I/O Supply Voltage — 1.65 V to 1.95 V (VDDIO)
I2C Address — 0x28 (7-bit)
RF Output Power — [DATA_NEEDED: TX output power dBm]
Antenna Pins — TX1, TX2 (differential); RX1, RX2
Integrated MCU Core — ARM Cortex-M0 (ROM-resident NCI firmware)
Operating Modes — Reader/Writer, Card Emulation (P2P), Tag Detection
Modes of Operation — Active, Standby, Hard Power Down, Low-Power Polling
Moisture Sensitivity Level — MSL 3
İşletim Sıcaklığı — -30 C to +85 C

Dökümanlar & Kaynaklar

Tüm Ürünleri Gözden Geçir BOM Oluştur Teklif İsteyin