THVD1450DRBR vs ISO1450BDWR Perbandingan

Perbandingan bersamaan detil THVD1450DRBR dari Texas Instruments dan ISO1450BDWR dari Texas Instruments. Bandingkan spesifikasi penting, parameter listrik, pengemasan, status cycle, harga, dan ketersediaan untuk menentukan komponen terbaik untuk kebutuhan desain Anda.

Perbandingan Spesifikasi

Parameter Umum THVD1450DRBR ISO1450BDWR
Merek Texas Instruments Texas Instruments
Kategori Interface ICs Interface ICs
Status Lingkungan Hidup Aktif Aktif
Product Type RS-485/RS-422 Transceiver (half-duplex) —
Number of Drivers/Receivers 1/1 —
Supply Voltage (VCC) 3 V to 5.5 V —
Maximum Data Rate 50 Mbps —
ESD Protection (Bus Pins) ±18 kV IEC 61000-4-2 contact/air —
EFT Immunity ±4 kV IEC 61000-4-4 —
Common-Mode Range -7 V to +12 V Wide common-mode bus voltage range (per datasheet)
Receiver Hysteresis 30 mV [DATA_NEEDED: receiver hysteresis voltage]
Receiver Fail-Safe Internal biasing (idle/short/open = logic high) —
Unit Load 1 UL (32 nodes on bus) 1/8 (up to 256 nodes on bus)
Suhu Kerja -40°C to +125°C -40C to +125C
Paket 8-VSON EP (DRB) 3x3 mm SOIC-16 wide-body (DW), 16 pins
Tipe Mounting Surface Mount, wettable flank Surface Mount
Moisture Sensitivity Level MSL 1 —
Status RoHS Compliant Compliant
Duplex Mode Half —
Fungsi — Isolated half-duplex RS-485 / RS-422 transceiver
Data Rate (max) — 50 Mbps
Isolation Voltage (rms) — 5 kVrms (reinforced)
Number of Drivers / Receivers — 1/1
Duplex — Half
Supply Voltage VCC1 (logic side) — 3 V to 5.5 V
Supply Voltage VCC2 (bus side) — Internally generated by isolated DC-DC
Bus Pin ESD (IEC 61000-4-2) — ±16 kV (air / contact, per datasheet)
Bus Pin ESD (HBM) — ±4 kV
IEC 61000-4-4 EFT Immunity — ±4 kV
Surge Immunity — [DATA_NEEDED: IEC 61000-4-5 surge rating]
Penutupan Panas — Yes
Current Limiting — Yes
Low-Power Standby — Yes
Level MSL — 3 (per JEDEC J-STD-020)
Compliance Standards — TIA/EIA-485-A, TIA/EIA-422, IEC 61000-4-2, IEC 61000-4-4

Spek dan Sumber

Buka Semua Produk Buat BOM Ajukan Diskon