THVD1450DRBR vs ISO1450BDWR Ikinahambing
Detalyadong pagkakahiwalay na pagkakahambing ng THVD1450DRBR sa pamamagitan ng Texas Instruments at ISO1450BDWR sa pamamagitan ng Texas Instruments. Ikinahambing ang mga pangunahing paglalarawan, mga tama ng elektriko, paakay, kalagayan ng buhay, presyo, at pagkakaroon upang makita ang pinakamahusay na komponente para sa iyong mga kinakailangang pang disenyo.
Texas Instruments
THVD1450DRBR - 3.3-5V RS-485 Transceiver, ±18kV ESD, 50Mbps | TI
THVD1450DRBR ✓ NakahandaTexas Instruments
ISO1450BDWR - 50Mbps 5kVrms Isolated RS-485/RS-422 Transceiver | Texas Instruments
ISO1450BDWR ✓ NakahandaPagsanggunian na paghahambing
| Parametro | THVD1450DRBR | ISO1450BDWR |
|---|---|---|
| Brand | Texas Instruments | Texas Instruments |
| Kategorya | Interface ICs | Interface ICs |
| Katayuan ng Lifecycle | Aktibo | Aktibo |
| Product Type | RS-485/RS-422 Transceiver (half-duplex) | — |
| Number of Drivers/Receivers | 1/1 | — |
| Supply Voltage (VCC) | 3 V to 5.5 V | — |
| Maximum Data Rate | 50 Mbps | — |
| ESD Protection (Bus Pins) | ±18 kV IEC 61000-4-2 contact/air | — |
| EFT Immunity | ±4 kV IEC 61000-4-4 | — |
| Common-Mode Range | -7 V to +12 V | Wide common-mode bus voltage range (per datasheet) |
| Receiver Hysteresis | 30 mV | [DATA_NEEDED: receiver hysteresis voltage] |
| Receiver Fail-Safe | Internal biasing (idle/short/open = logic high) | — |
| Unit Load | 1 UL (32 nodes on bus) | 1/8 (up to 256 nodes on bus) |
| Temperature na Operasyon | -40°C to +125°C | -40C to +125C |
| Packhaging | 8-VSON EP (DRB) 3x3 mm | SOIC-16 wide-body (DW), 16 pins |
| Uri ng Pagpapasok | Surface Mount, wettable flank | Surface Mount |
| Moisture Sensitivity Level | MSL 1 | — |
| Tindminan RoHS | Compliant | Compliant |
| Duplex Mode | Half | — |
| Fungsi | — | Isolated half-duplex RS-485 / RS-422 transceiver |
| Data Rate (max) | — | 50 Mbps |
| Isolation Voltage (rms) | — | 5 kVrms (reinforced) |
| Number of Drivers / Receivers | — | 1/1 |
| Duplex | — | Half |
| Supply Voltage VCC1 (logic side) | — | 3 V to 5.5 V |
| Supply Voltage VCC2 (bus side) | — | Internally generated by isolated DC-DC |
| Bus Pin ESD (IEC 61000-4-2) | — | ±16 kV (air / contact, per datasheet) |
| Bus Pin ESD (HBM) | — | ±4 kV |
| IEC 61000-4-4 EFT Immunity | — | ±4 kV |
| Surge Immunity | — | [DATA_NEEDED: IEC 61000-4-5 surge rating] |
| Thermal Shutdown | — | Yes |
| Current Limiting | — | Yes |
| Low-Power Standby | — | Yes |
| Level ng MSL | — | 3 (per JEDEC J-STD-020) |
| Compliance Standards | — | TIA/EIA-485-A, TIA/EIA-422, IEC 61000-4-2, IEC 61000-4-4 |