5M240ZT144A5N - 192 Macrocell MAX V CPLD 1.8V 144-TQFP | Intel
MPN: 5M240ZT144A5N ✓ Aktif5M240ZT144A5N Ringkasan
A CPLD (Complex Programmable Logic Device) is a non-volatile programmable logic device that sits between simple PAL/GAL devices and full FPGAs. It belongs to the broader hierarchy of programmable logic devices -> logic ICs -> integrated circuits, and is typically used for combinational and sequential logic functions, interface bridging, and power-up logic. Unlike SRAM-based FPGAs, MAX V CPLDs do not require external boot memory and configure in microseconds, making them ideal for deterministic boot-time applications.
Key features include 192 macrocells distributed across 4 logic array blocks (LABs), 4 global clock networks, 8 Kbits of user flash memory, and 1.8 V core with multi-voltage I/O support (1.2 V to 3.3 V LVCMOS/LVTTL). The JTAG and ISP interfaces enable in-system programming via the Quartus Prime toolchain, while the industrial temperature grade (-40C to +100C) supports harsh-environment deployment. The device draws only 27 uA standby current, an order of magnitude lower than most competing CPLDs.
Architecturally, the 5M240Z uses a look-up-table (LUT)-based logic element combined with a flash-based configuration cell array, eliminating external configuration memory. The multi-voltage I/O bank architecture permits mixed-voltage interfacing on a single chip without external level shifters, a major advantage for legacy system integration. The 144-pin TQFP package exposes 114 user I/Os, sufficient for wide bus bridging and parallel interface duties.
Typical applications include I/O expansion and voltage-translation bridges between processors and peripherals, bus-interface logic (PCI to local bus, SPI to parallel), power-up sequencing logic for multi-rail systems, LED display driving and control, and industrial control glue logic. The instant-on non-volatile configuration is especially valuable in safety-critical or deterministic-boot applications.
When designing with this part, ensure that the Quartus II or Quartus Prime toolchain version supports the MAX V device family and that the I/O voltage banks are powered correctly for each interface standard. Decoupling capacitors should be placed close to all VCCINT and VCCIO pins. Unused pins can be set to tri-state via the Quartus software to minimize power consumption.
This page synthesizes distributor pricing, same-package alternatives, and practical design notes not found in the manufacturer datasheet.
Alternatif penggantian untuk 5M240ZT144A5N — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.
Variasi di dalam seri ini
Model-series yang sama yang kompatibel dengan penggantian 5M240ZT144A5N (sama faktor bentuk dan footprint) — berbeda di dalam Package, Programming Interface, Configuration Memory, I/O Supply Voltage (VCCIO), Operating Temperature.
5M240ZT144C5N
✅ Drop-InKontak untuk harga
Lihat Datasheet →5M240ZT144C4N
✅ Drop-InKontak untuk harga
Lihat Datasheet →5M160ZT144A5N
✅ Drop-In📋 Alternatif referensi (tidak dalam katalog)
5M1270ZT144A5N
✅ Drop-In✗ Habis Stok
$19.85 / Satuan
Lihat Datasheet →5M240ZT144A5N Rating Maksimal & Karakteristik Listrik
| Series | MAX V |
| Device Family | MAX V (5M240Z) |
| Logic Elements / Macrocells | 240 LE / 192 Macrocells |
| Logic Array Blocks (LABs) | 4 |
| User I/Os | 114 |
| User Flash Memory | 8 Kbits |
| Core Supply Voltage (VCCINT) | 1.8 V |
| I/O Supply Voltage (VCCIO) | 1.2 V to 3.3 V |
| Standby Current (ICCSTBY) | 27 uA typical |
| Package Type | TQFP-144 |
| Terminal Form | Gull Wing |
| Operating Temperature Grade | Industrial (-40C to +100C) |
| Tipe Mounting | Surface Mount |
| Status RoHS | Compliant |
| Programming Interface | JTAG / ISP (Quartus Prime) |
| Global Clock Networks | 4 |
Konfigurasi Pin 5M240ZT144A5N
| Pin produk 1 | I/O — General purpose user I/O pin |
| Pin produk 2 | I/O — General purpose user I/O pin |
| Pin produk 3 | I/O — General purpose user I/O pin |
| Pin produk 4 | I/O — General purpose user I/O pin |
| Pin produk 5 | VCCIO1 — I/O bank 1 supply voltage |
| Pin produk 6 | I/O — General purpose user I/O pin |
| Pin produk 7 | I/O — General purpose user I/O pin |
| Pin produk 8 | GND — Ground |
| Pin produk 9 | I/O — General purpose user I/O pin |
| Pin produk 10 | I/O — General purpose user I/O pin |
| Pin produk 11 | I/O — General purpose user I/O pin |
| Pin produk 12 | I/O — General purpose user I/O pin |
| Pin produk 13 | I/O — General purpose user I/O pin |
| Pin produk 14 | TMS — JTAG Test Mode Select |
| Pin produk 15 | TCK — JTAG Test Clock |
| Pin produk 16 | TDO — JTAG Test Data Out |
| Pin produk 17 | TDI — JTAG Test Data In |
| Pin produk 18 | I/O — General purpose user I/O pin |
| Pin produk 19 | I/O — General purpose user I/O pin |
| Pin produk 20 | GND — Ground |
| Pin produk 21 | I/O — General purpose user I/O pin |
| Pin produk 22 | I/O — General purpose user I/O pin |
| Pin produk 23 | VCCIO2 — I/O bank 2 supply voltage |
| Pin produk 24 | I/O — General purpose user I/O pin |
| Pin produk 25 | I/O — General purpose user I/O pin |
| Pin produk 26 | I/O — General purpose user I/O pin |
| Pin produk 27 | I/O — General purpose user I/O pin |
| Pin produk 28 | I/O — General purpose user I/O pin |
| Pin produk 29 | I/O — General purpose user I/O pin |
| Pin produk 30 | I/O — General purpose user I/O pin |
| Pin produk 31 | I/O — General purpose user I/O pin |
| Pin produk 32 | I/O — General purpose user I/O pin |
| Pin produk 33 | I/O — General purpose user I/O pin |
| Pin produk 34 | I/O — General purpose user I/O pin |
| Pin produk 35 | GND — Ground |
| Pin produk 36 | I/O — General purpose user I/O pin |
| Pin produk 37 | I/O — General purpose user I/O pin |
| Pin produk 38 | VCCIO3 — I/O bank 3 supply voltage |
| Pin produk 39 | I/O — General purpose user I/O pin |
| Pin produk 40 | I/O — General purpose user I/O pin |
| Pin produk 41 | I/O — General purpose user I/O pin |
| Pin produk 42 | I/O — General purpose user I/O pin |
| Pin produk 43 | I/O — General purpose user I/O pin |
| Pin produk 44 | I/O — General purpose user I/O pin |
| Pin produk 45 | I/O — General purpose user I/O pin |
| Pin produk 46 | I/O — General purpose user I/O pin |
| Pin produk 47 | I/O — General purpose user I/O pin |
| Pin produk 48 | I/O — General purpose user I/O pin |
| Pin produk 49 | GND — Ground |
| Pin produk 50 | I/O — General purpose user I/O pin |
| Pin produk 51 | I/O — General purpose user I/O pin |
| Pin produk 52 | I/O — General purpose user I/O pin |
| Pin produk 53 | VCCIO4 — I/O bank 4 supply voltage |
| Pin produk 54 | I/O — General purpose user I/O pin |
| Pin produk 55 | I/O — General purpose user I/O pin |
| Pin produk 56 | I/O — General purpose user I/O pin |
| Pin produk 57 | I/O — General purpose user I/O pin |
| Pin produk 58 | I/O — General purpose user I/O pin |
| Pin produk 59 | I/O — General purpose user I/O pin |
| Pin produk 60 | I/O — General purpose user I/O pin |
| Pin produk 61 | I/O — General purpose user I/O pin |
| Pin produk 62 | I/O — General purpose user I/O pin |
| Pin produk 63 | I/O — General purpose user I/O pin |
| Pin produk 64 | GND — Ground |
| Pin produk 65 | I/O — General purpose user I/O pin |
| Pin produk 66 | I/O — General purpose user I/O pin |
| Pin produk 67 | I/O — General purpose user I/O pin |
| Pin produk 68 | CLK0 — Global clock input 0 |
| Pin produk 69 | CLK1 — Global clock input 1 |
| Pin produk 70 | CLK2 — Global clock input 2 |
| Pin produk 71 | CLK3 — Global clock input 3 |
| Pin produk 72 | I/O — General purpose user I/O pin |
| Pin produk 73 | I/O — General purpose user I/O pin |
| Pin produk 74 | I/O — General purpose user I/O pin |
| Pin produk 75 | GND — Ground |
| Pin produk 76 | I/O — General purpose user I/O pin |
| Pin produk 77 | I/O — General purpose user I/O pin |
| Pin produk 78 | I/O — General purpose user I/O pin |
| Pin produk 79 | I/O — General purpose user I/O pin |
| Pin produk 80 | VCCINT — Core supply voltage (1.8 V) |
| Pin produk 81 | I/O — General purpose user I/O pin |
| Pin produk 82 | I/O — General purpose user I/O pin |
| Pin produk 83 | I/O — General purpose user I/O pin |
| Pin produk 84 | I/O — General purpose user I/O pin |
| Pin produk 85 | I/O — General purpose user I/O pin |
| Pin produk 86 | I/O — General purpose user I/O pin |
| Pin produk 87 | I/O — General purpose user I/O pin |
| Pin produk 88 | I/O — General purpose user I/O pin |
| Pin produk 89 | GND — Ground |
| Pin produk 90 | I/O — General purpose user I/O pin |
| Pin produk 91 | I/O — General purpose user I/O pin |
| Pin produk 92 | I/O — General purpose user I/O pin |
| Pin produk 93 | I/O — General purpose user I/O pin |
| Pin produk 94 | VCCIO1 — I/O bank 1 supply voltage |
| Pin produk 95 | I/O — General purpose user I/O pin |
| Pin produk 96 | I/O — General purpose user I/O pin |
| Pin produk 97 | I/O — General purpose user I/O pin |
| Pin produk 98 | I/O — General purpose user I/O pin |
| Pin produk 99 | I/O — General purpose user I/O pin |
| Pin produk 100 | I/O — General purpose user I/O pin |
| Pin produk 101 | I/O — General purpose user I/O pin |
| Pin produk 102 | I/O — General purpose user I/O pin |
| Pin produk 103 | GND — Ground |
| Pin produk 104 | I/O — General purpose user I/O pin |
| Pin produk 105 | I/O — General purpose user I/O pin |
| Pin produk 106 | I/O — General purpose user I/O pin |
| Pin produk 107 | VCCIO2 — I/O bank 2 supply voltage |
| Pin produk 108 | I/O — General purpose user I/O pin |
| Pin produk 109 | I/O — General purpose user I/O pin |
| Pin produk 110 | I/O — General purpose user I/O pin |
| Pin produk 111 | I/O — General purpose user I/O pin |
| Pin produk 112 | I/O — General purpose user I/O pin |
| Pin produk 113 | I/O — General purpose user I/O pin |
| Pin produk 114 | I/O — General purpose user I/O pin |
| Pin produk 115 | I/O — General purpose user I/O pin |
| Pin produk 116 | I/O — General purpose user I/O pin |
| Pin produk 117 | GND — Ground |
| Pin produk 118 | I/O — General purpose user I/O pin |
| Pin produk 119 | I/O — General purpose user I/O pin |
| Pin produk 120 | I/O — General purpose user I/O pin |
| Pin produk 121 | VCCIO3 — I/O bank 3 supply voltage |
| Pin produk 122 | I/O — General purpose user I/O pin |
| Pin produk 123 | I/O — General purpose user I/O pin |
| Pin produk 124 | I/O — General purpose user I/O pin |
| Pin produk 125 | I/O — General purpose user I/O pin |
| Pin produk 126 | I/O — General purpose user I/O pin |
| Pin produk 127 | I/O — General purpose user I/O pin |
| Pin produk 128 | I/O — General purpose user I/O pin |
| Pin produk 129 | I/O — General purpose user I/O pin |
| Pin produk 130 | I/O — General purpose user I/O pin |
| Pin produk 131 | GND — Ground |
| Pin produk 132 | I/O — General purpose user I/O pin |
| Pin produk 133 | I/O — General purpose user I/O pin |
| Pin produk 134 | I/O — General purpose user I/O pin |
| Pin produk 135 | VCCIO4 — I/O bank 4 supply voltage |
| Pin produk 136 | I/O — General purpose user I/O pin |
| Pin produk 137 | I/O — General purpose user I/O pin |
| Pin produk 138 | I/O — General purpose user I/O pin |
| Pin produk 139 | I/O — General purpose user I/O pin |
| Pin produk 140 | I/O — General purpose user I/O pin |
| Pin produk 141 | I/O — General purpose user I/O pin |
| Pin produk 142 | I/O — General purpose user I/O pin |
| Pin produk 143 | I/O — General purpose user I/O pin |
| Pin produk 144 | I/O — General purpose user I/O pin |
Aplikasi Umum
5M240ZT144A5N cocok untuk 6 aplikasis: Bus Interface Bridging, Industrial I/O Expansion and Control, Power-Up Sequencing Logic, LED Display Driving and Control, Legacy Peripheral Emulation, Automotive Aftermarket Electronics.
Bus Interface Bridging
The 5M240ZT144A5N is well-suited for bus-interface bridging between processors and peripherals operating at different voltages. Its 192 macrocells and 114 user I/Os provide ample headroom for 8/16/32-bit data paths, address decoders, and FIFO control logic. The multi-voltage I/O bank architecture (1.2 V to 3.3 V) allows direct connection between, for example, a 1.8 V application processor and a 3.3 V legacy peripheral without external level shifters. Designers typically place the CPLD between the SoC memory bus and the downstream device, decoding chip selects and managing wait-state insertion. Compared with discrete 74-series glue logic, the MAX V integrates the equivalent of 30-50 SSI/MSI packages into a single 144-TQFP device, reducing PCB area and BOM cost.
Direkomendasikan
Industrial I/O Expansion and Control
With 114 user I/Os and industrial temperature grade (-40C to +100C), the 5M240ZT144A5N serves as an I/O expansion controller for industrial PLCs, motor drivers, and sensor aggregators. Its 1.8 V core and multi-voltage I/O bank support allow direct connection to 3.3 V digital sensors, 2.5 V logic, and legacy 5 V tolerant inputs (when VCCIO is set to 3.3 V). The flash-based non-volatile configuration ensures deterministic boot in safety-critical systems, eliminating the FPGA configuration delay. Typical designs use the 192 macrocells for PWM generation, encoder decoding (quadrature, SSI, BiSS), and isolated digital I/O control via SPI-to-parallel or shift-register interfaces. The 27 uA standby current supports battery-backed industrial sensor nodes.
Direkomendasikan
Power-Up Sequencing Logic
The instant-on, non-volatile configuration of the 5M240ZT144A5N makes it ideal for power-up sequencing controllers in multi-rail systems. Unlike SRAM FPGAs that require milliseconds to configure, the MAX V begins executing logic within microseconds of VCCINT reaching 1.8 V, enabling precise rail-by-rail enable sequencing for processors, FPGAs, and analog blocks. The 192 macrocells support 8-16 independent power-good trees with programmable delays and watchdog monitoring. Designers implement sequence state machines, fault latches, and margining control in the CPLD while delegating high-throughput DSP to downstream processors. The 1.2 V to 3.3 V I/O flexibility allows direct gate-drive of MOSFET enables without external level translation.
Direkomendasikan
LED Display Driving and Control
The 5M240ZT144A5N's 114 user I/Os and 192 macrocells handle multi-channel LED matrix driving for commercial signage, traffic displays, and architectural lighting. Each I/O can source/sink 4-8 mA directly, supporting multiplexed 8x8 to 16x16 RGB matrices with row-column decode logic in the CPLD. The 27 uA standby current supports always-on display controllers in battery-backed installations. Designers implement brightness PWM, gamma correction tables, and serial-to-parallel data expansion in the CPLD, freeing the main MCU for content management. The industrial temperature grade ensures operation in outdoor signage cabinets where ambient temperatures exceed +70C.
Direkomendasikan
Legacy Peripheral Emulation
The 5M240ZT144A5N is frequently used to emulate legacy peripherals (ISA bus, parallel port, PS/2, UART expansion) on modern systems where the original controller ICs are obsolete. With 192 macrocells, designers implement custom register maps, interrupt controllers, and timing-critical protocols that microcontrollers cannot reliably handle due to software latency. The non-volatile flash configuration provides field-upgradeable firmware without external boot memory. The 144-TQFP package offers 114 I/Os, sufficient for 16-bit ISA-style buses plus control signals. Industrial temperature grade and RoHS compliance make it suitable for long-lifecycle industrial retrofits where 10-15 year product support is required.
Direkomendasikan
Automotive Aftermarket Electronics
While the 5M240ZT144A5N is not AEC-Q100 qualified, it serves in automotive aftermarket products such as diagnostic tools, CAN-to-USB gateways, and gauge cluster replacements where industrial temperature grade suffices. The 192 macrocells implement CAN message filtering, custom gauge sweep algorithms, and OBD-II protocol decoding. The 114 user I/Os allow direct drive of segment LCDs and LED bar graphs without external drivers. Designers appreciate the Quartus Prime toolchain's deterministic timing closure for safety-related driver-information displays. For OEM automotive deployment requiring AEC-Q100, designers should select the AEC-Q100 qualified MAX V variants or migrate to Cyclone IV GX with automotive qualification.
Direkomendasikan
Ringkasan Produk Direkomendasikan
Data referensi engineering untuk 5M240ZT144A5N — pembandingan, panduan desain, dan informasi konformitas.
Panduan Pemilihan
Pembandingan dengan Alternatif
| Parameter Umum | Produk Ini | 5M240ZT144C5N | 5M240ZT144C4N | 5M160ZT144A5N | 5M1270ZT144A5N |
|---|---|---|---|---|---|
| Package | TQFP-144 | TQFP-144 (same) | TQFP-144 (same) | TQFP-144 (same) | TQFP-144 (same) |
| Brand | Intel | Intel | Intel | Intel | Intel |
| Macrocells | 192 | 192 (same) | 192 (same) | 128 (-33%) | 980 (+410%) |
| User I/Os | 114 | 114 (same) | 114 (same) | 79 (-31%) | 212 (MAX II larger density) |
| Core Voltage | 1.8 V | 1.8 V | 1.8 V | 1.8 V | 1.8 V |
| Temperature Grade | Industrial (-40C to +100C) | Commercial (0C to +85C) | Commercial (0C to +85C) | Industrial (-40C to +100C) | Industrial (-40C to +100C) |
| User Flash Memory | 8 Kbits | 8 Kbits | 8 Kbits | 8 Kbits | 8 Kbits (MAX II CFM) |
| Family | MAX V | MAX V | MAX V | MAX V | MAX II |
Diferensiator Kunci
- Highest macrocell count within the MAX V 144-TQFP family (vs5M160ZT144A5N)
- MAX V architecture vs MAX II for newer toolchain support (vs5M1270ZT144A5N (MAX II))
- Industrial temperature grade for harsh environments (vs5M240ZT144C5N)
Catatan Desain
Estimated: At VCCINT = 1.8 V, the 5M240ZT144A5N core draws approximately 50-100 mA active depending on toggle rate, plus I/O bank current. Each VCCIO bank can draw 50-200 mA based on switching activity and load. Place a 100 nF decoupling capacitor within 5 mm of every VCCINT and VCCIO pin, plus a bulk 10-47 uF tantalum or ceramic capacitor near the package. Total worst-case power dissipation is estimated at 0.5-1.0 W, well within TQFP-144 thermal limits without external heatsinking.
The 144-pin TQFP package has 0.5 mm pitch leads. Use a 4-layer PCB with a dedicated ground plane beneath the device to provide low-impedance return paths for switching I/Os. Keep all JTAG signals (TMS, TCK, TDI, TDO) less than 50 mm trace length and avoid routing them near high-speed switching signals to prevent programming errors. Unused I/O pins should be configured as tri-state inputs with weak pull-up enabled in the Quartus assignment editor to minimize power and noise.
Do not confuse the 5M240Z (MAX V, 240 logic elements) with the 5M1270Z (MAX II, 1270 logic elements) - they share the same package outline but the 5M1270Z has 5x the logic capacity and uses the older MAX II architecture. Also note that the 5M240Z uses flash configuration while the older MAX II 5M1270Z uses a similar flash scheme but with different programming files - Quartus Prime projects are NOT interchangeable between MAX II and MAX V without re-targeting. Verify the JTAG ID code matches the expected device family before programming.
Informasi Konformitas
RoHS and REACH compliant per Intel product documentation. Not AEC-Q100 qualified - this part is intended for industrial and consumer applications, not automotive OEM. For AEC-Q100 automotive deployment, select MAX V variants with automotive qualification or migrate to Cyclone IV/MAX 10 automotive-qualified families.
