Texas Instruments

DS90CR216MTD-TI - 21-Bit 66MHz LVDS Receiver | Texas Instruments

MPN: DS90CR216MTD-TI ✓ Aktif
+3.3 V Vdss 48-pin TSSOP Package 66 MHz Speed
MOQ: 1 |

DS90CR216MTD-TI Ringkasan

Texas Instruments DS90CR216MTD-TI is a +3.3 V rising-edge data-strobe LVDS receiver for a 21-bit Channel Link interface, operating at up to 66 MHz and packaged in a 48-pin TSSOP. It receives 21 parallel low-voltage differential data signals and a differential clock while providing serialized data and strobe outputs for reliable point-to-point or balanced cable communication.

A Channel Link receiver is a high-speed interface circuit that converts parallel source-synchronous data into a differential, clock-forwarded transmission format. In the broader semiconductor hierarchy, it belongs to the interface IC class and uses LVDS signaling to reduce voltage noise, ground-reference requirements, and conductor count compared with an unwrapped parallel bus. The DS90CR216 family is intended for high-speed point-to-point links carrying video, control, or general digital data.

The principal operating characteristics are a +3.3 V supply, a 66 MHz maximum data-strobe frequency, 21 data outputs, and a 48-pin TSSOP package. Its rising-edge data-strobe architecture transfers data on the clock edge for a deterministic sampling arrangement. Differential signaling improves common-mode noise rejection, while the multiplexed LVDS outputs reduce cable size relative to routing 21 separate single-ended signals over a long distance.

The receiver includes 21 parallel data inputs, a differential clock input, differential data and strobe outputs, and power-ground connections. Its electrical performance depends on correct termination, controlled-impedance routing, and stable supply decoupling. Because the data and strobe are transmitted differentially, the interface can reject a substantial amount of common-mode noise while preserving signal timing over a cable or backplane connection.

Typical uses include industrial control links, video transport systems, instrumentation, embedded display connections, and equipment requiring a compact multi-bit differential interface. The 21-bit width is especially useful where transferring each bus as separate single-ended traces would consume excessive board area or cable conductors. Systems must account for propagation delay between the clock and data channels when defining timing margins.

For implementation, follow the pin-description table and recommended external-circuit diagram in the manufacturer datasheet. Place the differential clock and data traces with controlled impedance, keep the input and output interfaces away from high-current switching paths, and validate connector or cable length against the required transfer rate. Do not treat TSSOP lead spacing as a substitute for correct high-speed routing discipline.

This page combines the family-level operating data with practical interface guidance, verified replacement candidates, and a package-aware comparison. It is intended to help engineers identify the correct LVDS Channel Link receiver, verify replacement compatibility, and plan a signal-integrity-conscious implementation rather than relying only on a basic component description.

Alternatif penggantian untuk DS90CR216MTD-TI — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.

Variasi di dalam seri ini

Model-series yang sama yang kompatibel dengan penggantian DS90CR216MTD-TI (sama faktor bentuk dan footprint) — berbeda di dalam Number of Pins, Supply Voltage.

Texas Instruments
Number of Pins: 48
Supply Voltage: 3 V to 3.6 V

DS90CR216MTDX/NOPB

✅ Drop-In
Texas Instruments
📦 48-TSSOP
Receiver · 3/21 · LVDS · 3 V to 3.6 V · 48-TFSOP (0.240, 6.10mm Width) · Surface Mount · Tape & Reel (TR) · 1386 Mbps (max)

Kontak untuk harga

Lihat Datasheet →

DS90CR216MTD/NOPB

✅ Drop-In
📦 48-TSSOP
Uses a NOPB ordering suffix rather than the DS90CR216MTD-TI designation; the listed core interface is the same 3.3 V, 21-bit, 66 MHz Channel Link receiver.

📋 Alternatif referensi (tidak dalam katalog)

DS90CR216MTDX/NOPB

✅ Drop-In
Texas Instruments
📦 48-TSSOP
Receiver · 3/21 · LVDS · 3 V to 3.6 V · 48-TFSOP (0.240, 6.10mm Width) · Surface Mount · Tape & Reel (TR) · 1386 Mbps (max)

Kontak untuk harga

Lihat Datasheet →

DS90CR216AMTD/NOPB

✅ Drop-In
📦 48-TSSOP
Uses the A ordering suffix rather than the target suffix; the cross-reference identifies the same 21-bit, 3.3 V Channel Link receiver in a 48-pin TSSOP.

📋 Alternatif referensi (tidak dalam katalog)

DS90CR216AMTDX/NOPB

✅ Drop-In
📦 48-TSSOP
Combines the A and X ordering suffixes rather than the target suffix; the cross-reference states that terminals and packages are consistent and replacement requires no modification.

📋 Alternatif referensi (tidak dalam katalog)

DS90CR216MTD-TI Spesifikasi

Product Type 21-bit Channel Link LVDS receiver
Tegangan Pemuat +3.3 V
Frekuensi Bawah Maximum 66 MHz
Number of Data Bits 21 bits
Number of Data Outputs 21 outputs
Data Strobe Rising edge
Interface Standard LVDS Channel Link
Logic Family LVDS
Paket 48-pin TSSOP
Tipe Mounting Surface mount
Jumlah Pin 48 pins

DS90CR216MTD-TI 48-pin tssop Diamant Konfigurasi Panduan

Konfigurasi pin untuk DS90CR216MTD-TI (48-pin tssop pakai pakai). Penomoran pin, fungsi, dan diagram koneksi ditetapkan dalam datasheet produsen. Lihatnya untuk footprint dan pedoman perpindahan paruh.

Diamant diagram pakai pakai 48-pin tssop untuk DS90CR216MTD-TI

Tidak ada data diatribut pin yang tersedia untuk DS90CR216MTD-TI.

Lihat ke: datasheet produk untuk konfigurasi pin penuh.

Aplikasi Umum

DS90CR216MTD-TI cocok untuk 6 aplikasis: Industrial Control Data Links, Video Transport Interfaces, Instrumentation and Test Systems, Embedded Display Backplanes, Embedded Control and Data Acquisition, Secure Monitoring and Camera Modules.

🏭

Industrial Control Data Links

The DS90CR216MTD-TI fits industrial control systems that must move 21 parallel source-synchronous signals across a compact balanced connection. At up to 66 MHz, the +3.3 V receiver can accept a 21-bit data group and differential clock while delivering differential data and strobe outputs. Differential signaling improves common-mode rejection and reduces the conductor burden associated with 21 single-ended traces. In a controller-to-module architecture, this can simplify cable construction and improve noise immunity, although the design must preserve controlled-impedance routing, provide the required terminations, and verify timing margin across the complete cable and connector path.

📺

Video Transport Interfaces

The DS90CR216MTD-TI is appropriate for transporting grouped pixel or control data between video-processing and display modules. Its 21-bit Channel Link width carries substantially more information per transfer cycle than a narrow serial interface, while the 66 MHz clock ceiling supports demanding source-synchronous traffic. The receiver's differential data and strobe outputs are designed for balanced cabling, where common-mode noise rejection and reduced ground-reference dependence are important. Designers should budget cable skew separately from clock frequency because the parallel data group must remain aligned with the forwarded strobe at the far end. Connector geometry, cable loss, and PCB return paths therefore determine the practical usable link distance.

🔧

Instrumentation and Test Systems

The DS90CR216MTD-TI can serve as the receiving endpoint for instrumentation that collects 21 parallel measurement or control bits and transfers them over a compact differential cable. A 21-bit payload is useful when several converters, switches, or status lines must be transported with a common clock. Operating from +3.3 V supports integration with modern mixed-signal systems, while LVDS signaling reduces susceptibility to common-mode interference encountered near switching power stages or digital equipment. For accurate acquisition, the source must launch valid data at the specified rising-edge strobe, and the complete system should be checked for propagation-delay skew, input threshold behavior, grounding, and connector performance rather than relying only on nominal clock frequency.

📱

Embedded Display Backplanes

The DS90CR216MTD-TI is suitable for an embedded display backplane or processor-to-display module that needs a 21-bit parallel input converted into a compact differential Channel Link connection. The interface reduces the number of conductors needed for a wide bus and provides a forwarded data-strobe relationship for source-synchronous timing. Its 48-pin TSSOP package supports conventional surface-mount assembly, while the +3.3 V operating point integrates with common display-controller logic. Practical implementation should preserve differential pair symmetry, provide a continuous ground reference, and keep the clock pair matched in length to the data pairs. Display refresh timing must also be checked against the receiver's specified edge and propagation-delay limits.

🧩

Embedded Control and Data Acquisition

The DS90CR216MTD-TI can consolidate a 21-bit parallel sensor, actuator, or digital-control group into a differential data-and-strobe link between embedded modules. The 66 MHz maximum clock provides headroom for repeated acquisition or command cycles, while differential transmission improves noise immunity over longer inter-module wiring. The receiver is particularly relevant where direct point-to-point routing of 21 single-ended signals would consume excessive pins or cable conductors. The source logic must maintain the required setup and hold relationship to the rising-edge strobe, and the receiver site needs local decoupling. Timing closure must include the transmitter delay, cable delay, connector delay, and receiver propagation delay across voltage and temperature extremes.

🎥

Secure Monitoring and Camera Modules

The DS90CR216MTD-TI can carry grouped timing, control, and status data in a camera or monitoring module where a conventional parallel bus would be too wide or noisy. Twenty-one data bits per clocked transfer provide useful payload density, and the differential Channel Link outputs support a compact shielded or twisted-pair connection. Differential signaling is advantageous in equipment containing motors, switching regulators, or long ground paths because it suppresses common-mode disturbances that can corrupt single-ended interfaces. The link still requires careful design: maintain controlled differential impedance, avoid discontinuities in return paths, observe the receiver's input termination requirements, and validate operation with the actual cable length. Security-sensitive equipment should also confirm that separate data paths meet its isolation and compliance requirements.

Ringkasan Produk Direkomendasikan

DS90CR215MTD Texas Instruments Digunakan di dalam: Industrial Control Data Links, Video Transport Interfaces, Instrumentation and Test Systems, Embedded Control and Data Acquisition, Secure Monitoring and Camera Modules DS90CR216MTD/NOPB Same-family interface alternative Digunakan di dalam: Industrial Control Data Links, Embedded Control and Data Acquisition SN65LVDS96DGG LVDS interface companion concept Digunakan di dalam: Video Transport Interfaces DS90CR216MTD Texas Instruments Digunakan di dalam: Instrumentation and Test Systems DS90CR216MTDX/NOPB Texas Instruments Digunakan di dalam: Embedded Display Backplanes DS90CR216AMTD/NOPB Same-family 48-TSSOP ordering Digunakan di dalam: Embedded Display Backplanes DS90CR216AMTDX/NOPB Pin-compatible same-family ordering Digunakan di dalam: Secure Monitoring and Camera Modules
What is the DS90CR216MTD-TI?
The DS90CR216MTD-TI is a +3.3 V, 21-bit Channel Link LVDS receiver designed for data-strobe operation up to 66 MHz. It receives parallel data and a differential clock and produces differential data and strobe outputs in a 48-pin TSSOP. According to the Texas Instruments product page, the device is specifically identified as a rising-edge data-strobe LVDS 21-bit Channel Link receiver.
How many data bits can DS90CR216MTD-TI transfer?
The DS90CR216MTD-TI transfers 21 data bits per channel-link cycle and includes 21 corresponding data outputs. The Texas Instruments DS90CR216 product description confirms the 21-bit Channel Link architecture, while the family datasheet identifies the rising-edge data-strobe interface and 66 MHz operating frequency. This width reduces the conductor count compared with transmitting all 21 signals as separate single-ended lines.
What is the maximum clock frequency of DS90CR216MTD-TI?
The DS90CR216MTD-TI supports a maximum clock frequency of 66 MHz. According to the Texas Instruments DS90CR216 product page, the part is a +3.3 V rising-edge data-strobe LVDS receiver for 21-bit Channel Link operation at 66 MHz. Actual usable link margin can vary with cable length, connector geometry, PCB routing, and the timing of the transmitting device.
Where can I download the DS90CR216MTD-TI datasheet PDF?
The official DS90CR216 datasheet and product-support materials are available from Texas Instruments at https://www.ti.com/lit/gpn/ds90cr216. The manufacturer product page at https://www.ti.com/product/DS90CR216 provides ordering, parameter, and quality information. Use the manufacturer documentation for the complete pin-description table, timing diagrams, and recommended external circuitry.
Where can I find the DS90CR216MTD-TI pinout?
The DS90CR216MTD-TI pinout is documented in the manufacturer pin-description table for the 48-pin TSSOP package. Start with the official DS90CR216 datasheet at https://www.ti.com/lit/gpn/ds90cr216 and locate the terminal information section. Assign every PCB land by its exact pin name and number rather than inferring connections from the DS90CR215 or another package variant.
Is the DS90CR216MTD-TI a receiver or transmitter?
The DS90CR216MTD-TI is a receiver for the 21-bit Channel Link interface. It accepts parallel data and a differential clock, then provides differential Channel Link data and strobe outputs. Texas Instruments describes the family as a rising-edge data-strobe LVDS 21-bit Channel Link device; the DS90CR216 member performs the receiving function in the stated channel-link signal path.
Can DS90CR216MTD/NOPB replace DS90CR216MTD-TI?
The DS90CR216MTD/NOPB is a same-manufacturer, same-package candidate that is presented by cross-reference results as replacing the DS90CR216MTD. Confirm the ordered suffix, terminal assignments, operating temperature grade, and lead-free requirements in the current manufacturer ordering information before approving it. The cross-reference identifies equivalent family functions, but procurement and production qualification remain engineering decisions.
What is the best drop-in replacement for DS90CR216MTD-TI?
The strongest drop-in candidate is the Texas Instruments DS90CR216MTD/NOPB because the manufacturer cross-reference identifies the same DS90CR216 interface in the same 48-pin TSSOP format. Other same-family TSSOP orderings may also match functionally, but the exact suffix determines finish and environmental ordering options. Verify pin compatibility, timing, temperature range, and supply requirements against the official datasheet.
DS90CR216MTD-TI vs DS90CR216MTDX/NOPB: which should I choose?
DS90CR216MTD-TI and DS90CR216MTDX/NOPB are same-package, same-family orderings, and the cross-reference results identify matching 48-pin TSSOP, 3.3 V, 21-output, and up-to-1.43-Gbps-class interface attributes. The DS90CR216MTDX/NOPB ordering may reflect different finish or reel orientation. Compare the full orderable suffix and approved package drawing rather than treating the base family name as sufficient.
When should I choose DS90CR216MTD-TI instead of another Channel Link receiver?
Choose the DS90CR216MTD-TI when the design requires a +3.3 V, 21-bit rising-edge Channel Link receiver in a 48-pin TSSOP with operation up to 66 MHz. It is appropriate when parallel source data must be transported over compact differential data and strobe pairs. Select a different compatible receiver only if its protocol edge, width, supply, timing, package, or qualification requirements better match the system.
Is DS90CR216MTD-TI suitable for industrial control and video links?
The DS90CR216MTD-TI is suitable for industrial control, instrumentation, and video transport links that use a 21-bit parallel-to-LVDS Channel Link interface. Its +3.3 V supply, 66 MHz clock capability, and differential data-strobe outputs support compact balanced connections. The operating-temperature grade must be checked for the target enclosure, and the complete link must pass signal-integrity and EMC validation.
Where can I buy DS90CR216MTD-TI and check stock and lead time?
Use the Request a Quote form on this page to request current availability, minimum order quantity, lead time, and a quotation for DS90CR216MTD-TI. The part is identified in the manufacturer product information as a 48-pin TSSOP interface IC, and distributor listings confirm that the exact base-device ordering is catalogued. Procurement details should be confirmed at the time of the request.
What is the price of DS90CR216MTD-TI?
The current commercial price of DS90CR216MTD-TI is not stated in fixed text because quotation terms, order quantity, and supply status can change. Use the Request a Quote form on this page for a current unit quotation and quantity-break information. For technical confirmation, use the Texas Instruments DS90CR216 product page and datasheet to verify the exact device ordering and package.
What are the key specifications of DS90CR216MTD-TI that engineers should know?
The DS90CR216MTD-TI is a +3.3 V, 21-bit, rising-edge Channel Link LVDS receiver rated for operation up to 66 MHz in a 48-pin TSSOP package. Its core features include 21 parallel data inputs, differential clock input, differential data and strobe outputs, and common-mode noise rejection from differential signaling. Exact timing, current, and temperature limits must be taken from the manufacturer datasheet.
What can replace DS90CR216MTD-TI without changing the PCB?
A PCB-compatible replacement must use the same 48-pin TSSOP footprint and preserve the DS90CR216 terminal assignments and edge-sensitive timing. The verified same-family candidates include DS90CR216MTD/NOPB, DS90CR216MTDX/NOPB, DS90CR216AMTD/NOPB, and DS90CR216AMTDX/NOPB. Review the exact ordering suffix, package drawing, timing limits, temperature grade, and production documentation before releasing the substitution.

Data referensi engineering untuk DS90CR216MTD-TI — pembandingan, panduan desain, dan informasi konformitas.

Panduan Pemilihan

Select the DS90CR216MTD-TI for a +3.3 V, 21-bit rising-edge Channel Link receiver designed around a 48-pin TSSOP and operation up to 66 MHz. The closest same-family choices are the DS90CR216MTD/NOPB, DS90CR216MTDX/NOPB, DS90CR216AMTD/NOPB, and DS90CR216AMTDX/NOPB. They preserve the core interface and package but may differ in finish, reel orientation, or other orderable attributes. Choose the exact suffix that matches the assembly process and qualification requirements, then confirm terminal assignments and timing in the manufacturer documentation. Do not choose the DS90CR215 family unless its channel width and protocol behavior match the source system. For a new design, verify supply tolerance, operating-temperature grade, propagation delay, input termination, differential impedance, cable length, and the permitted transmitter pairing. The receiver is a strong choice when 21-bit parallel data must become a compact differential link, but it is not a general-purpose substitute for unrelated LVDS serializer or deserializer devices.

Pembandingan dengan Alternatif

Parameter Umum Produk Ini DS90CR216MTD DS90CR216MTD/NOPB DS90CR216MTDX/NOPB DS90CR216AMTD/NOPB DS90CR216AMTDX/NOPB
Package 48-TSSOP 48-TSSOP 48-TSSOP 48-TSSOP 48-TSSOP 48-TSSOP
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments
Supply Voltage +3.3 V +3.3 V +3.3 V +3.3 V +3.3 V +3.3 V
Maximum Clock Frequency 66 MHz 66 MHz 66 MHz 66 MHz 66 MHz 66 MHz
Data Width 21 bits 21 bits 21 bits 21 bits 21 bits 21 bits
Number of Outputs 21 outputs 21 outputs 21 outputs 21 outputs 21 outputs 21 outputs
Data Strobe Rising edge Rising edge Rising edge Rising edge Rising edge Rising edge
Interface Type LVDS Channel Link receiver LVDS Channel Link receiver LVDS Channel Link receiver LVDS Channel Link receiver LVDS Channel Link receiver LVDS Channel Link receiver

Diferensiator Kunci

  • Full 21-bit Channel Link width in the same package family (vsDS90CR215MTD)
  • Direct manufacturer-family replacement path (vsDS90CR216MTD/NOPB)
  • No PCB modification for verified same-package orderings (vsDS90CR216AMTDX/NOPB)

Catatan Desain

Treat each differential data or clock pair as a controlled-impedance transmission line rather than as two unrelated traces. Match pair geometry, minimize stubs, maintain continuous reference planes, and use the receiver input termination shown in the manufacturer application diagram. Account for connector and cable delay when validating the rising-edge data-strobe relationship; nominal 66 MHz operation alone does not guarantee adequate timing margin on every interconnect.

Place the receiver close to the connector or cable entry point when practical, then route the differential pairs over a continuous ground plane without plane splits. Keep switching regulators, high-speed clocks, and other noisy return currents away from the input region. Match the clock pair to the data-group timing budget and avoid adding test pads or long branches that create impedance discontinuities near the 48-pin TSSOP.

Do not substitute a DS90CR215 ordering, a different package, or an unrelated LVDS serializer based only on clock frequency. Confirm the 21-bit width, rising-edge behavior, terminal assignments, supply voltage, package drawing, propagation delay, and temperature grade. Also verify whether the required assembly form uses the M, AM, or X ordering suffix; these suffixes can change reel orientation or other orderable attributes without changing the core receiver function.

Follow the manufacturer power-connection and decoupling diagram when assigning ground and supply pins in the exposed-pad-style TSSOP footprint. Keep the +3.3 V return path short and provide local bypass capacitance at the device according to the recommended circuit. Confirm that both the receiver and its link partner tolerate supply noise and voltage tolerance at the connector, since link integrity can degrade if the remote transmitter introduces overshoot beyond the receiver's operating conditions.

Informasi Konformitas

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Bebas Logam Lengket
Unknown
Bebas Halogena
Unknown
Mineral Konflik
Unknown

The manufacturer ordering information includes NOPB variants, but no explicit RoHS, REACH, AEC-Q100, halogen-free, or conflict-minerals statement was identified in the verified listings. The target DS90CR216MTD-TI suffix-specific compliance status remains unknown.

Data disahkan pada: 2026-11-16 — data disahkan dan disusun oleh tim engineering komponen XAIPART

Pencarian Terkait

DS90CR216MTD-TI datasheet DS90CR216MTD-TI pinout DS90CR216MTD-TI datasheet pdf DS90CR216MTD-TI price DS90CR216MTD-TI stock DS90CR216MTD-TI equivalent DS90CR216MTD-TI replacement DS90CR216MTD-TI cross reference DS90CR216MTD-TI footprint DS90CR216MTD-TI 48-TSSOP DS90CR216MTD-TI 21-bit LVDS DS90CR216MTD-TI 66 MHz Texas Instruments DS90CR216MTD-TI DS90CR216MTD-TI industrial control link DS90CR216MTD-TI vs DS90CR216MTDX/NOPB

Komponen dan Istilah Terkait

Texas Instruments DS90CR216MTD-TI DS90CR216MTD DS90CR216MTD/NOPB DS90CR216MTDX/NOPB DS90CR216AMTD/NOPB DS90CR216AMTDX/NOPB DS90CR215MTD SN65LVDS96DGG LVDS Channel Link interface IC LVDS receiver 21-bit data link rising-edge data strobe differential signaling common-mode noise rejection TSSOP-48 TSSOP package family surface-mount package industrial control video transport instrumentation display backplane signal integrity
Kutipan Cepat RFQ
Isi detail lengkap — tim penjualan kami akan membalas dalam 24 jam
Nomor Part Manufaktur Paket QTY Harga Target Lengkap
✓
Kutipan telah disubmit!

Kami akan membalas email Anda dalam 24 jam

1
RFQ Dikirim
2
Kutipan Diterima
3
Order Ditempatkan
4
Pembayaran
5
Dikirim
6
Dikirim
Lihat Detil RFQ