DSPIC30F6010A-20E/PT - 20 MIPS 16-bit DSC, 144KB Flash | Microchip
MPN: DSPIC30F6010A-20E/PT ✓ AktifDSPIC30F6010A-20E/PT Ringkasan
A Digital Signal Controller sits at the intersection of two product taxonomies: it is a specialized microcontroller (MCU) augmented with DSP-oriented Multiply-Accumulate (MAC), barrel shifter, and dual-data-fetch engine that can sustain 40 single-cycle MACs per second at full clock. Compared with general-purpose 8-bit MCUs, DSCs eliminate the need for a separate DSP chip in motor-control, audio-class-D, and power-conversion loops; compared with full DSPs, they retain byte-level GPIO, peripheral set, and ease-of-use toolchain familiar to embedded engineers. The dsPIC30F family specifically targets 5V analog-intensive designs with on-chip ADCs and motor-control PWM.
Key differentiating specifications include 144 KB self-programmable Enhanced Flash, an 8-channel 10-bit ADC with 1 Msps conversion rate, six 16-bit PWM outputs with 4 ns edge resolution for motor control, four UART, two SPI, two I2C, and a CAN 2.0B module for industrial networking. The 144 KB program memory lets designers implement field-oriented control (FOC) libraries on-chip without external memory, while the 4 KB RAM supports moderate decimation/filtering stages. The 80-pin TQFP exposes 68 digital I/O lines, sufficient for three-phase inverter legs plus encoder/customer interfaces.
Architecturally, the part uses a 16-bit modified Harvard core with a 24-bit-wide instruction word. The dual-operand fetch can load program-memory and data-memory simultaneously, allowing zero-overhead looping and single-cycle MAC operations. Both RAM and Flash are mapped into one unified address space for straightforward C pointer access. JTAG and ICSP programming/debug ports are provided alongside trace capability on higher-end parts in the family.
Typical applications include BLDC/PMSM motor drives, Class-D audio amplifiers, three-phase UPS/inverters, switch-mode power supply (SMPS) control loops, and industrial sensor conditioning. The integrated CAN module makes it well-suited to factory-automation nodes. Wide operating voltage of 2.5V to 5.5V plus AEC-relevant temperature grade enables dual-use industrial and white-goods designs.
Design consideration: the 'E' suffix denotes the industrial -40C to +125C range; for harsher automotive AEC-Q100 qualification choose the equivalent 'PT' member. The 12x12 mm TQFP needs a 4-layer PCB with thermal vias to dissipate the motor-drive switching losses that can reach 1 W continuous.
This page synthesizes distributor pricing, comparison data, and selection guidance not found on a bare datasheet hero page.
Alternatif penggantian untuk DSPIC30F6010A-20E/PT — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.
Variasi di dalam seri ini
Model-series yang sama yang kompatibel dengan penggantian DSPIC30F6010A-20E/PT (sama faktor bentuk dan footprint) — berbeda di dalam ADC, Package, Core Architecture, Operating Temperature, RoHS Status.
DSPIC30F6012A-20E/PT
✅ Drop-In📋 Alternatif referensi (tidak dalam katalog)
DSPIC30F6010A-20E/PF
✅ Drop-InKontak untuk harga
Lihat Datasheet →DSPIC30F5016-20E/PT
✅ Drop-InKontak untuk harga
Lihat Datasheet →DSPIC30F5011-30I/PT
✅ Drop-InKontak untuk harga
Lihat Datasheet →DSPIC30F5015-20E/PT
✅ Drop-InKontak untuk harga
Lihat Datasheet →DSPIC30F4013-20E/PT
✅ Drop-InKontak untuk harga
Lihat Datasheet →DSPIC30F6010A-20E/PT Rating Maksimal & Karakteristik Listrik
| Core Architecture | 16-bit dsPIC30F modified Harvard |
| Program Memory (Flash) | 144 KB (48K x 24 words) |
| RAM | 4 KB |
| Instruction Width | 24-bit |
| Operating Frequency | 20 MIPS (up to 20 MHz) |
| Operating Voltage | 2.5 V to 5.5 V |
| Suhu Kerja | -40C to +125C (industrial, 'E' suffix) |
| ADC | 10-bit, 1 Msps, multi-channel |
| PWM Channels | Six 16-bit outputs, 4 ns edge resolution |
| Digital I/O Pins | 68 (approximate) |
| UART | 4 |
| SPI | 2 |
| I2C | 2 |
| CAN | CAN 2.0B module (1 channel) |
| Paket | 80-pin TQFP (12 x 12 mm) |
| Tipe Mounting | Surface Mount |
| Status RoHS | Compliant |
| Programming/Debug | ICSP and JTAG |
Konfigurasi Pin DSPIC30F6010A-20E/PT
| Pin produk 1 | OSC1 — Crystal oscillator input |
| Pin produk 2 | OSC2 — Crystal oscillator output |
| Pin produk 3 | MCLR — Master clear (reset) input |
| Pin produk 4 | PGED1 — ICSP programming data |
| Pin produk 5 | PGEC1 — ICSP programming clock |
| Pin produk 6 | U1RX — UART1 receive |
| Pin produk 7 | U1TX — UART1 transmit |
| Pin produk 8 | U2RX — UART2 receive |
| Pin produk 9 | U2TX — UART2 transmit |
| Pin produk 10 | AVDD — Analog supply |
| Pin produk 11 | AVSS — Analog ground |
| Pin produk 12 | AN0 — Analog input 0 |
| Pin produk 13 | AN1 — Analog input 1 |
| Pin produk 14 | AN2 — Analog input 2 |
| Pin produk 15 | AN3 — Analog input 3 |
| Pin produk 16 | AN4 — Analog input 4 |
| Pin produk 17 | AN5 — Analog input 5 |
| Pin produk 18 | AN6 — Analog input 6 |
| Pin produk 19 | AN7 — Analog input 7 |
| Pin produk 20 | AN8 — Analog input 8 |
| Pin produk 21 | AN9 — Analog input 9 |
| Pin produk 22 | AN10 — Analog input 10 |
| Pin produk 23 | AN11 — Analog input 11 |
| Pin produk 24 | AN12 — Analog input 12 |
| Pin produk 25 | AN13 — Analog input 13 |
| Pin produk 26 | AN14 — Analog input 14 |
| Pin produk 27 | AN15 — Analog input 15 |
| Pin produk 28 | VDD — Digital supply |
| Pin produk 29 | VSS — Digital ground |
| Pin produk 30 | PWM1L — PWM1 low-side output |
| Pin produk 31 | PWM1H — PWM1 high-side output |
| Pin produk 32 | PWM2L — PWM2 low-side output |
| Pin produk 33 | PWM2H — PWM2 high-side output |
| Pin produk 34 | PWM3L — PWM3 low-side output |
| Pin produk 35 | PWM3H — PWM3 high-side output |
| Pin produk 36 | PWM4L — PWM4 low-side output |
| Pin produk 37 | PWM4H — PWM4 high-side output |
| Pin produk 38 | PWM5L — PWM5 low-side output |
| Pin produk 39 | PWM5H — PWM5 high-side output |
| Pin produk 40 | PWM6L — PWM6 low-side output |
| Pin produk 41 | PWM6H — PWM6 high-side output |
| Pin produk 42 | OC1 — Output compare 1 |
| Pin produk 43 | OC2 — Output compare 2 |
| Pin produk 44 | OC3 — Output compare 3 |
| Pin produk 45 | OC4 — Output compare 4 |
| Pin produk 46 | IC1 — Input capture 1 |
| Pin produk 47 | IC2 — Input capture 2 |
| Pin produk 48 | IC3 — Input capture 3 |
| Pin produk 49 | IC4 — Input capture 4 |
| Pin produk 50 | IC5 — Input capture 5 |
| Pin produk 51 | INT0 — External interrupt 0 |
| Pin produk 52 | INT1 — External interrupt 1 |
| Pin produk 53 | INT2 — External interrupt 2 |
| Pin produk 54 | T1CK — Timer1 external clock |
| Pin produk 55 | T2CK — Timer2 external clock |
| Pin produk 56 | T3CK — Timer3 external clock |
| Pin produk 57 | SDA — I2C data |
| Pin produk 58 | SCL — I2C clock |
| Pin produk 59 | SDI1 — SPI1 data input |
| Pin produk 60 | SDO1 — SPI1 data output |
| Pin produk 61 | SCK1 — SPI1 clock |
| Pin produk 62 | SS1 — SPI1 slave select |
| Pin produk 63 | SDI2 — SPI2 data input |
| Pin produk 64 | SDO2 — SPI2 data output |
| Pin produk 65 | SCK2 — SPI2 clock |
| Pin produk 66 | SS2 — SPI2 slave select |
| Pin produk 67 | U3RX — UART3 receive |
| Pin produk 68 | U3TX — UART3 transmit |
| Pin produk 69 | U4RX — UART4 receive |
| Pin produk 70 | U4TX — UART4 transmit |
| Pin produk 71 | C1RX — CAN1 receive |
| Pin produk 72 | C1TX — CAN1 transmit |
| Pin produk 73 | RTCC — Real-time clock output |
| Pin produk 74 | VDD — Digital supply |
| Pin produk 75 | VSS — Digital ground |
| Pin produk 76 | TMS — JTAG test mode select |
| Pin produk 77 | TCK — JTAG test clock |
| Pin produk 78 | TDI — JTAG test data in |
| Pin produk 79 | TDO — JTAG test data out |
| Pin produk 80 | TRST — JTAG test reset |
Aplikasi Umum
DSPIC30F6010A-20E/PT cocok untuk 7 aplikasis: BLDC / PMSM Motor Control, Class-D Audio Amplifier, Three-Phase UPS / Inverter, Switch-Mode Power Supply (SMPS) Control, Industrial Sensor Conditioning, Automotive Body Controllers, Factory Automation Nodes.
BLDC / PMSM Motor Control
The DSPIC30F6010A-20E/PT's six 16-bit PWM outputs with 4 ns edge resolution and a 10-bit 1 Msps ADC make it ideal for field-oriented control (FOC) of three-phase brushless motors. Its 144 KB Enhanced Flash fits a full FOC library plus application stack on-chip, while the 20 MIPS DSP engine sustains the 100 microsecond current-control loop typical of consumer and appliance motor drives. A CAN 2.0B module lets the same part network into industrial motor-control buses such as CANopen or DeviceNet.
Direkomendasikan
Class-D Audio Amplifier
The DSPIC30F6010A-20E/PT drives a half-bridge Class-D amplifier topology from its six 16-bit PWM outputs, supporting output filters and >90 percent efficiency stages. Its 20 MIPS throughput runs the speaker-protection algorithm (DC blocking, anti-clipping, thermal foldback) at 48 kHz without CPU headroom overruns. The 2.5V-5.5V supply and integrated 10-bit ADC cleanly capture analog feedback signals from the speaker output, and four UARTs give the system remote-control or display-panel connectivity in a typical home-AV product.
Direkomendasikan
Three-Phase UPS / Inverter
The DSPIC30F6010A-20E/PT coordinates three-phase inverter switching and grid-synchronization loops in a single-chip topology. Three complementary PWM pairs drive IGBT legs, while the 10-bit ADC samples DC-bus voltage and current at 1 Msps to run the digital current controller inside one PWM period. The CAN interface and four UARTs share telemetry with the system supervisor, and 144 KB flash holds the entire MPPT, anti-islanding, and grid-synchronization firmware. The 2.5V-5.5V range simplifies interfacing to gate drivers and current shunts.
Direkomendasikan
Switch-Mode Power Supply (SMPS) Control
The DSPIC30F6010A-20E/PT implements digital control of switch-mode converters using its high-resolution PWM and fast ADC. Its DSP engine runs discrete-time control algorithms, PFC, and soft-start routines in fewer than 5 microseconds per cycle, supporting 100 kHz+ switching converters. The 80-pin TQFP exposes enough GPIO for synchronous rectification signals, OTP/OVP comparators, and PMBus/I2C communication to a supervisory MCU, making the part a single-chip digital controller for industrial PSUs and telecom rectifiers.
Direkomendasikan
Industrial Sensor Conditioning
The DSPIC30F6010A-20E/PT conditions and filters analog sensor signals through its 10-bit ADC and DSP engine, then transmits results via CAN, RS-485 (via UART), or 4-20 mA loop. The 2.5V-5.5V range matches analog transducers directly, while 4 KB RAM buffers decimation and FIR-filter stages. Five ICSP-compatible GPIO plus JTAG let engineers in-field update coefficients over the same CAN bus. The -40C to +125C temperature grade supports industrial cabinetry and outdoor telemetry cabinets.
Direkomendasikan
Automotive Body Controllers
Although the dsPIC30F6010A-20E/PT is industrial-grade rather than AEC-Q100 qualified, the family is widely used inside cabin body-control modules, HVAC actuators, and rear-seat-entertainment controllers. Six PWM channels drive stepper motors or DC brushed loads directly; the CAN 2.0B interface bridges to the vehicle CAN bus; and the ADC samples thermistor inputs over a wide temperature range. The 80-pin TQFP eases integration on traditional lead-frame PCBs and supports -40C to +125C cabin temperatures.
Direkomendasikan
Factory Automation Nodes
The DSPIC30F6010A-20E/PT anchors a CAN-based factory-automation node, handling sensor input, local motion control, and master PLC communication. Its CAN 2.0B module plus two SPI buses attach to industrial peripherals such as SPI ADC/DAC, EEPROMS, and quadrature encoders. The 144 KB flash accommodates full EtherCAT/CANopen slave stacks with custom firmware overlays, and four UARTs allow RS-485 multidrop chaining. Industrial temperature range and robust peripheral set make this part a common sight on PLC I/O modules.
Direkomendasikan
Ringkasan Produk Direkomendasikan
Data referensi engineering untuk DSPIC30F6010A-20E/PT — pembandingan, panduan desain, dan informasi konformitas.
Panduan Pemilihan
Pembandingan dengan Alternatif
| Parameter Umum | Produk Ini | DSPIC30F6012A-20E/PT | DSPIC30F6010A-20E/PF | DSPIC30F5016-20E/PT | DSPIC30F5011-30I/PT | DSPIC30F5015-20E/PT | DSPIC30F4013-20E/PT |
|---|---|---|---|---|---|---|---|
| Package | 80-pin TQFP (12x12 mm) | 80-pin TQFP (12x12 mm) - same | 80-pin TQFP - same | 80-pin TQFP (12x12 mm) - same | 80-pin TQFP (12x12 mm) - same | 80-pin TQFP (12x12 mm) - same | 80-pin TQFP (12x12 mm) - same |
| Brand | Microchip Technology | Microchip Technology - same | Microchip Technology - same | Microchip Technology - same | Microchip Technology - same | Microchip Technology - same | Microchip Technology - same |
| Program Flash Memory | 144 KB | 288 KB | 144 KB | 66 KB | 66 KB | 66 KB | 48 KB |
| RAM | 4 KB | 8 KB | 4 KB | 2 KB | 2 KB | 2 KB | 2 KB |
| Maximum CPU Speed | 20 MIPS | 20 MIPS | 20 MIPS | 20 MIPS | 30 MIPS | 20 MIPS | 20 MIPS |
| CAN Module | CAN 2.0B | CAN 2.0B | CAN 2.0B | CAN 2.0B | CAN 2.0B | CAN 2.0B | CAN 2.0B |
| Operating Voltage | 2.5 V to 5.5 V | 2.5 V to 5.5 V | 2.5 V to 5.5 V | 2.5 V to 5.5 V | 2.5 V to 5.5 V | 2.5 V to 5.5 V | 2.5 V to 5.5 V |
Diferensiator Kunci
- Doubled flash and RAM versus the lower family members (vsDSPIC30F5016-20E/PT)
- Retains backward-compatible 20 MIPS throughput without peripheral compromise (vsDSPIC30F5011-30I/PT)
- Pin-compatible upgrade path to the 6012A with double memory (vsDSPIC30F6012A-20E/PT)
Catatan Desain
Estimated: at 80 MHz internal logic toggling rate, 5V supply and full DSP workload, the part can dissipate up to ~1 W continuous in the 80-pin TQFP. Thermal resistance theta_JA on a 2-layer 1-oz JEDEC test board is typically ~50 C/W, so junction temperature rise above 25C ambient may reach 50C (limited below the 125C ceiling). For Class-D motor-control stages with sustained PWM activity, place a 0.5 square-inch copper flood under the exposed pad area and reduce loop resistance on PWM outputs.
Both AVDD and VDD require independent 0.1 uF ceramic bypass caps placed within 1 cm of their respective pins, plus a 10 uF bulk tantalum near the AVDD pin. The AVDD analog rail should be tied to VDD through a ferrite bead to isolate ADC sampling noise from the digital supply. Estimated: total AVDD quiescent current during ADC sampling is ~5 mA per active channel, so the bulk cap must source 25 mA peak with negligible droop.
The 80-pin TQFP has 0.5 mm pitch leads, requiring 4-layer PCB with 4-mil traces and 8-mil spaces for escape routing. Use a small ground pour under the device body and stitch the perimeter with multiple vias to maximize thermal conduction. JTAG signals (TMS, TCK, TDI, TDO, TRST) should be length-matched within 4 mm and isolated from PWM switching edges with a ground guard.
Do not connect PGED1/PGEC1 to any other digital signals or pull-ups - these pins double as digital I/O and accidental loading can prevent ICSP programming. The CAN bus needs a 120-ohm termination resistor at each end of the segment; failures on long harness runs are commonly caused by missing termination, not the chip itself. Brown-out reset (BOR) must be enabled in configuration bits for industrial deployments or the device can latch into invalid states below ~2.3 V.
Informasi Konformitas
RoHS compliant per Microchip product page. Industrial-grade operating temperature (-40C to +125C) but not AEC-Q100 qualified - choose dsPIC33F automotive parts for AEC-Q100 needs. Microchip publishes CMRT declarations under their compliance portal.
