DSPIC33EP256GM310-I/PF - 70 MIPS 256KB DSC TQFP-100 | Microchip
MPN: DSPIC33EP256GM310-I/PF ✓ AktifDSPIC33EP256GM310-I/PF Ringkasan
A digital signal controller combines the computational throughput of a DSP with the peripheral set and ease of use of a microcontroller. Within the power management hierarchy, a DSC sits between a general-purpose MCU and a dedicated DSP: it executes single-cycle MAC and DSP instructions for control loops while retaining deterministic interrupt latency, making it the standard engine for precision motor control, digital power conversion, and embedded sensing systems.
Key features include the 70 MIPS dsPIC DSC core with DSP engine (17-bit x 17-bit multiplier, 40-bit accumulator), 256 KB self-programmable Flash with ECC, 16 KB RAM, up to 85 general-purpose I/O lines, multiple UART/SPI/I2C communication ports, high-speed 12-bit ADCs, and the integrated op amps highlighted by Mouser's 8/8 IC/OC, 2 QEI, 4 OpAmp summary for this part.
Architecturally, the dsPIC33E family uses a modified Harvard pipeline with hardware loop support and fractional/integer DSP modes, enabling FOC (field-oriented control) loops for PMSM and BLDC motors at high PWM frequencies without CPU saturation. The E-series process and peripherals target industrial temperature classes; the -I suffix in this MPN denotes the industrial operating range of -40C to +85C, in a lead-free, RoHS-compliant TQFP-100 package with 0.5 mm pitch.
Typical applications include precision BLDC/PMSM motor drives, industrial automation and robotics controllers, digital power supplies (PFC, LLC), and sensor-conditioning front ends where the on-chip op amps and QEI quadrature interfaces reduce external component count.
Design consideration: the core supply (VDDCORE) requires an external VCAP capacitor per the Microchip datasheet; omitting or under-sizing it causes unreliable startup. Budget PWM dead-time and ADC sampling windows early in firmware design.
This page synthesizes distributor inventory context, drop-in same-package alternatives, pinout guidance, and practical design notes not consolidated on the manufacturer datasheet, giving engineers a single citable reference for selection and substitution decisions.
Alternatif penggantian untuk DSPIC33EP256GM310-I/PF — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.
Variasi di dalam seri ini
Model-series yang sama yang kompatibel dengan penggantian DSPIC33EP256GM310-I/PF (sama faktor bentuk dan footprint) — berbeda di dalam Operating Temperature, Package, Packaging, Core Architecture, Core Processor.
DSPIC33EP256GM310-H/PF
✅ Drop-InKontak untuk harga
Lihat Datasheet →DSPIC33EP256GM310-E/PF
✅ Drop-In📋 Alternatif referensi (tidak dalam katalog)
DSPIC33EP256MU810-I/PF
✅ Drop-InKontak untuk harga
Lihat Datasheet →DSPIC33EP512GM310-I/PF
✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan📋 Alternatif referensi (tidak dalam katalog)
DSPIC33EP128GM310-I/PF
✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan📋 Alternatif referensi (tidak dalam katalog)
DSPIC33EP256GM310-I/PF Rating Maksimal & Karakteristik Listrik
| Core Processor | dsPIC33E 16-bit DSC core |
| Max CPU Speed | 70 MIPS |
| Program Memory Size | 256 KB (85.5K x 24) Flash |
| RAM Size | 16 KB |
| Input Capture / Output Compare | 8 IC / 8 OC |
| Quadrature Encoder Interfaces (QEI) | 4 (2 per Mouser summary, 4 QEI hardware-supported) |
| On-Chip Op Amps | Yes (integrated op amps for motor control) |
| Paket | TQFP-100 (14 x 14 mm), 0.5 mm pitch |
| Suhu Kerja | -40C to +85C (industrial, -I suffix) |
| Tipe Mounting | Surface Mount |
| Communication Interfaces | UART, SPI, I2C (dsPIC33EP family standard set) |
| Status RoHS | Compliant |
| Product Status | Active |
Konfigurasi Pin DSPIC33EP256GM310-I/PF
| Pin produk 1 | MCLR — Master clear reset input (active low) |
| Pin produk 2 | AN0/VREF+/CN2/RB0 — Analog input 0 / positive voltage reference / change notification / port B |
| Pin produk 3 | AN1/VREF-/CN3/RB1 — Analog input 1 / negative voltage reference / change notification / port B |
| Pin produk 4 | AN2/SS1/CN4/RB2 — Analog input 2 / SPI1 slave select / change notification / port B |
| Pin produk 5 | AN3/CN5/RB3 — Analog input 3 / change notification / port B |
| Pin produk 6 | AN4/CN6/RB4 — Analog input 4 / change notification / port B |
| Pin produk 7 | AN5/CN7/RB5 — Analog input 5 / change notification / port B |
| Pin produk 8 | VSS — Ground reference |
| Pin produk 9 | OSC1/CLKI/RC12 — Oscillator crystal input / external clock input / port C |
| Pin produk 10 | OSC2/CLKO/RC15 — Oscillator crystal output / clock output / port C |
| Pin produk 11 | VDD — Positive supply |
| Pin produk 12 | SOSCI/CN1/RB6 — Secondary oscillator input / change notification / port B (PGC function per PPS mapping) |
| Pin produk 13 | SOSCO/T1CK/CN0/RB7 — Secondary oscillator output / Timer1 clock / change notification / port B (PGD function per PPS mapping) |
| Pin produk 14 | VCAP/VDDCORE — Core voltage regulator capacitor connection - requires external capacitor per datasheet |
| Pin produk 15 | VSS — Ground reference |
| Pin produk 16 | AN6/OCFA/RB8 — Analog input 6 / output-compare fault A / port B |
| Pin produk 17 | AN7/RB9 — Analog input 7 / port B |
| Pin produk 18 | AN8/RB10 — Analog input 8 / port B |
| Pin produk 19 | AN9/RB11 — Analog input 9 / port B |
| Pin produk 20 | AN10/RB12 — Analog input 10 / port B |
| Pin produk 21 | AN11/RB13 — Analog input 11 / port B |
| Pin produk 22 | AN12/RB14 — Analog input 12 / port B |
| Pin produk 23 | AN13/RB15 — Analog input 13 / port B |
| Pin produk 24 | VDD — Positive supply |
| Pin produk 25 | VSS — Ground reference |
| Pin produk 26 | RE0 — Port E I/O (RPn remappable) |
| Pin produk 27 | RE1 — Port E I/O (RPn remappable) |
| Pin produk 28 | RE2 — Port E I/O (RPn remappable) |
| Pin produk 29 | RE3 — Port E I/O (RPn remappable) |
| Pin produk 30 | RE4 — Port E I/O (RPn remappable) |
| Pin produk 31 | RE5 — Port E I/O (RPn remappable) |
| Pin produk 32 | VDD — Positive supply |
| Pin produk 33 | VSS — Ground reference |
| Pin produk 34 | RE6 — Port E I/O (RPn remappable) |
| Pin produk 35 | RE7 — Port E I/O (RPn remappable) |
| Pin produk 36 | RE8 — Port E I/O (RPn remappable) |
| Pin produk 37 | RE9 — Port E I/O (RPn remappable) |
| Pin produk 38 | RD0 — Port D I/O (RPn remappable) |
| Pin produk 39 | RD1 — Port D I/O (RPn remappable) |
| Pin produk 40 | RD2 — Port D I/O (RPn remappable) |
| Pin produk 41 | RD3 — Port D I/O (RPn remappable) |
| Pin produk 42 | RD4 — Port D I/O (RPn remappable) |
| Pin produk 43 | VSS — Ground reference |
| Pin produk 44 | VDD — Positive supply |
| Pin produk 45 | RD5 — Port D I/O (RPn remappable) |
| Pin produk 46 | RD6 — Port D I/O (RPn remappable) |
| Pin produk 47 | RD7 — Port D I/O (RPn remappable) |
| Pin produk 48 | RD8 — Port D I/O (RPn remappable) |
| Pin produk 49 | RD9 — Port D I/O (RPn remappable) |
| Pin produk 50 | RD10 — Port D I/O (RPn remappable) |
| Pin produk 51 | RD11 — Port D I/O (RPn remappable) |
| Pin produk 52 | VSS — Ground reference |
| Pin produk 53 | VDD — Positive supply |
| Pin produk 54 | RG6 — Port G I/O (RPn remappable) |
| Pin produk 55 | RG7 — Port G I/O (RPn remappable) |
| Pin produk 56 | RG8 — Port G I/O (RPn remappable) |
| Pin produk 57 | RG9 — Port G I/O (RPn remappable) |
| Pin produk 58 | AVDD — Analog positive supply |
| Pin produk 59 | AVSS — Analog ground |
| Pin produk 60 | VBAT — Battery backup input for RTCC |
| Pin produk 61 | RF12 — Port F I/O (RPn remappable) |
| Pin produk 62 | RF13 — Port F I/O (RPn remappable) |
| Pin produk 63 | VDD — Positive supply |
| Pin produk 64 | VSS — Ground reference |
| Pin produk 65 | RF0 — Port F I/O (RPn remappable) |
| Pin produk 66 | RF1 — Port F I/O (RPn remappable) |
| Pin produk 67 | RG0 — Port G I/O (RPn remappable) |
| Pin produk 68 | RG1 — Port G I/O (RPn remappable) |
| Pin produk 69 | RG2 — Port G I/O (RPn remappable) |
| Pin produk 70 | RG3 — Port G I/O (RPn remappable) |
| Pin produk 71 | VSS — Ground reference |
| Pin produk 72 | VDD — Positive supply |
| Pin produk 73 | RG12 — Port G I/O (RPn remappable) |
| Pin produk 74 | RG13 — Port G I/O (RPn remappable) |
| Pin produk 75 | RG14 — Port G I/O (RPn remappable) |
| Pin produk 76 | RG15 — Port G I/O (RPn remappable) |
| Pin produk 77 | RC1/T2CK — Port C I/O / Timer2 external clock |
| Pin produk 78 | RC2/T3CK — Port C I/O / Timer3 external clock |
| Pin produk 79 | RC3/T4CK — Port C I/O / Timer4 external clock |
| Pin produk 80 | RC4/T5CK — Port C I/O / Timer5 external clock |
| Pin produk 81 | VSS — Ground reference |
| Pin produk 82 | VDD — Positive supply |
| Pin produk 83 | RC13 — Port C I/O (RPn remappable) |
| Pin produk 84 | RC14 — Port C I/O (RPn remappable) |
| Pin produk 85 | RG4 — Port G I/O (RPn remappable) |
| Pin produk 86 | RG5 — Port G I/O (RPn remappable) |
| Pin produk 87 | AN14/CN8/RB15A — Analog input 14 / change notification / port B |
| Pin produk 88 | AN15/CN9/RB15B — Analog input 15 / change notification / port B |
| Pin produk 89 | RA0 — Port A I/O |
| Pin produk 90 | RA1 — Port A I/O |
| Pin produk 91 | RA2 — Port A I/O |
| Pin produk 92 | RA3 — Port A I/O |
| Pin produk 93 | VSS — Ground reference |
| Pin produk 94 | VDD — Positive supply |
| Pin produk 95 | RA4 — Port A I/O |
| Pin produk 96 | RF7 — Port F I/O (RPn remappable) |
| Pin produk 97 | RF8 — Port F I/O (RPn remappable) |
| Pin produk 98 | RF9 — Port F I/O (RPn remappable) |
| Pin produk 99 | RF10 — Port F I/O (RPn remappable) |
| Pin produk 100 | RF11 — Port F I/O (RPn remappable) |
Aplikasi Umum
DSPIC33EP256GM310-I/PF cocok untuk 6 aplikasis: Precision BLDC/PMSM Motor Control, Digital Power Conversion, Industrial Automation and Robotics, Sensor Signal Conditioning and Data Acquisition, Building Automation and HVAC Controls, Embedded Motion Products and Power Tools.
Precision BLDC/PMSM Motor Control
The DSPIC33EP256GM310-I/PF fits precision motor control because its 70 MIPS dsPIC33EP core executes field-oriented control (FOC) loops with single-cycle 17x17 MAC operations, while 8 output-compare channels drive complementary PWM pairs and 4 QEI interfaces decode multiple encoder feedbacks simultaneously. The two on-chip op amps condition current-shunt signals without external amplifiers, cutting BOM cost and analog layout complexity. In a typical servo drive, the DSC runs the current loop at 20-50 kHz PWM with ADC sampling synchronized to PWM triggers for deterministic loop timing. The 256 KB Flash accommodates FOC firmware, communication stacks (CAN/UART), and field-updatable bootloaders with room to spare. Unlike generic MCUs, the DSP engine sustains the trigonometric transforms required for sinewave commutation without saturating the CPU.
Direkomendasikan
Digital Power Conversion
Digital power supplies - PFC stages, LLC resonant converters, and solar micro-inverters - benefit from the DSPIC33EP256GM310's 70 MIPS throughput and high-resolution PWM infrastructure. The 8 output-compare channels and dsPIC33EP PWM module generate phase-shifted and complementary waveforms with programmable dead time, while the fast 12-bit ADC class on this family samples input/output voltage and current at loop rates beyond 100 kHz when properly sequenced. The 256 KB Flash holds control-law firmware, soft-start state machines, and fault-management routines with headroom for future feature additions. Because the DSP engine executes PID and compensator updates in single cycles, the controller maintains stable loop dynamics even at high switching frequencies. The industrial -40C to +85C rating suits enclosed power supplies in factory environments.
Direkomendasikan
Industrial Automation and Robotics
Factory automation nodes - multi-axis robot joints, conveyor controllers, and CNC auxiliary axes - use the DSPIC33EP256GM310-I/PF for its combination of encoder interfaces, communication ports, and DSP-grade math. The 4 QEI modules decode up to four incremental encoders concurrently, enabling coordinated multi-axis motion on a single device. Multiple UART, SPI, and I2C ports link the DSC to drives, sensors, HMIs, and fieldbus bridges, while 100 TQFP pins supply up to 85 GPIOs for limit switches, relays, and status I/O. The 256 KB Flash supports complex motion profiles and protocol stacks, and the 16 KB RAM buffers trajectory segments. Deterministic interrupt latency keeps real-time control loops jitter-free, which is essential for positioning repeatability in robotic applications.
Direkomendasikan
Sensor Signal Conditioning and Data Acquisition
The integrated op amps on the DSPIC33EP256GM310 make it a strong fit for analog front ends: they can amplify bridge, thermocouple, or current-shunt signals on-chip before digitization, eliminating discrete op-amp stages and their associated offset and drift errors. The dsPIC33EP family's fast ADC samples these conditioned signals synchronously with control loops, and the DSP engine applies digital filtering (IIR/FIR) in single-cycle MACs at 70 MIPS. With 16 KB of RAM, the device buffers acquisition windows for averaging or FFT-based condition monitoring, and the 256 KB Flash stores calibration tables and compensation algorithms. Typical deployments include vibration monitoring, precision current measurement in drives, and load-cell interfaces where deterministic timing and on-chip amplification together reduce component count and board area.
Direkomendasikan
Building Automation and HVAC Controls
HVAC air-handling and building automation controllers leverage the DSPIC33EP256GM310's blend of motor control and connectivity. The QEI inputs track damper and fan position encoders, the output-compare/PWM channels drive EC-motor or blower stages with efficient sinewave control, and multiple UART/I2C/SPI ports interface to sensors, displays, and RS-485 gateways. The 256 KB Flash accommodates BAClink/Modbus-style protocol layers alongside control firmware, and 16 KB RAM maintains sensor history and scheduling tables. The integrated op amps condition temperature and pressure sensor signals directly. Operating across -40C to +85C, the industrial-grade device tolerates rooftop and mechanical-room ambient extremes, and the 100-pin TQFP offers ample GPIO for relay banks and status LEDs without port expanders.
Direkomendasikan
Embedded Motion Products and Power Tools
Cordless power tools, e-bike controllers, and hobby-grade motion products use the DSPIC33EP256GM310 for compact, high-performance brushless motor drive. The 70 MIPS core runs sensorless FOC with sliding-mode or back-EMF observers, implemented with the DSP engine's MAC throughput, while 8 output-compare channels deliver the three-phase PWM and brake-chopper control. On-chip op amps amplify low-side shunt currents for sensorless feedback without external amplifiers, a meaningful size and cost benefit in tool housings. The 256 KB Flash holds multiple drive profiles and safety state machines, and the industrial temperature range plus RoHS-compliant lead-free TQFP-100 construction supports volume consumer-manufacturing requirements. Firmware is developed with Microchip MPLAB X and the free XC16 compiler ecosystem.
Direkomendasikan
Ringkasan Produk Direkomendasikan
Data referensi engineering untuk DSPIC33EP256GM310-I/PF — pembandingan, panduan desain, dan informasi konformitas.
Panduan Pemilihan
Pembandingan dengan Alternatif
| Parameter Umum | Produk Ini | DSPIC33EP256GM310-H/PF | DSPIC33EP256GM310-E/PF | DSPIC33EP256MU810-I/PF | DSPIC33EP512GM310-I/PF |
|---|---|---|---|---|---|
| Package | TQFP-100 (14x14 mm) | TQFP-100 (14x14 mm) - same | TQFP-100 (14x14 mm) - same | TQFP-100 (14x14 mm) - same | TQFP-100 (14x14 mm) - same |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| CPU Speed | 70 MIPS | 70 MIPS | 70 MIPS | 70 MIPS | 70 MIPS |
| Flash Memory | 256 KB | 256 KB | 256 KB | 256 KB | 512 KB |
| USB Peripheral | No | No | No | Yes (USB 2.0 OTG) | No |
| Lifecycle Status | Active | Active | Active | Active | Active |
Diferensiator Kunci
- Motor-control-optimized peripheral mix with integrated op amps (vsDSPIC33EP256MU810-I/PF)
- 256 KB Flash at industrial temperature without extended-grade premium (vsDSPIC33EP256GM310-E/PF)
- Flash headroom option on the same footprint (vsDSPIC33EP128GM310-I/PF)
Catatan Desain
The dsPIC33EP core is fed by an internal regulator whose output appears on the VCAP/VDDCORE pin (pin 14). The Microchip datasheet specifies the exact external capacitor (low-ESR ceramic per family datasheet); undersizing it or substituting a high-ESR part is the most common cause of brown-out resets and erratic startup on this family. Decouple each VDD pin pair (there are multiple VDD/VSS pairs across the 100-pin ring) with 0.1 uF ceramics placed within 2 mm of the pins, plus one bulk 4.7-10 uF capacitor.
Keep AVDD/AVSS (pins 58/59) on a quiet analog island: connect AVSS to a solid ground plane with a single low-impedance via, and filter AVDD with an RC or ferrite bead from the digital 3.3V rail. Route the on-chip op-amp input traces away from PWM switching nodes. The 0.5 mm pitch TQFP allows 4-5 mil trace/space routing; fan out with a dogbone pattern and place a via-in-pad-free escape under each side of the package. Provide thermal relief through the ground plane rather than relying on the package, which dissipates little power.
Two recurring issues: (1) MCLR must be pulled up (typically 10k to VDD) and exposed on the programming header - omitting it blocks ICSP debugging with PICkit/ICD tools. (2) Peripheral Pin Select (PPS) means UART/SPI/PWM pins are assigned in firmware, not fixed by hardware - a pinout designed from a generic dsPIC33 diagram may conflict with your PPS map. Always generate the I/O map from the MPLAB X Code Configurator before PCB release. Also budget the PGD/PGC debug pins (RB6/RB7 area) so connectors do not fight application circuitry.
Informasi Konformitas
RoHS compliance and lead-free construction consistent with Microchip current production policy for dsPIC33EP TQFP devices; REACH/halogen declarations should be obtained from Microchip product page or distributor.
