DSPIC33EP256GM310-I/PF - 70 MIPS 256KB DSC TQFP-100 | Microchip
部品番号: DSPIC33EP256GM310-I/PF ✓ 生産中| 数量 | 単価 | 小計 |
|---|---|---|
| 1 | $6.12 | $6.12 |
| 10 | $5.62 | $56.20 |
| 100 | $5.08 | $508.00 |
| 500 | $4.59 | $2,295.00 |
| 1,000 | $4.14 | $4,140.00 |
DSPIC33EP256GM310-I/PF 概要
A digital signal controller combines the computational throughput of a DSP with the peripheral set and ease of use of a microcontroller. Within the power management hierarchy, a DSC sits between a general-purpose MCU and a dedicated DSP: it executes single-cycle MAC and DSP instructions for control loops while retaining deterministic interrupt latency, making it the standard engine for precision motor control, digital power conversion, and embedded sensing systems.
Key features include the 70 MIPS dsPIC DSC core with DSP engine (17-bit x 17-bit multiplier, 40-bit accumulator), 256 KB self-programmable Flash with ECC, 16 KB RAM, up to 85 general-purpose I/O lines, multiple UART/SPI/I2C communication ports, high-speed 12-bit ADCs, and the integrated op amps highlighted by Mouser's 8/8 IC/OC, 2 QEI, 4 OpAmp summary for this part.
Architecturally, the dsPIC33E family uses a modified Harvard pipeline with hardware loop support and fractional/integer DSP modes, enabling FOC (field-oriented control) loops for PMSM and BLDC motors at high PWM frequencies without CPU saturation. The E-series process and peripherals target industrial temperature classes; the -I suffix in this MPN denotes the industrial operating range of -40C to +85C, in a lead-free, RoHS-compliant TQFP-100 package with 0.5 mm pitch.
Typical applications include precision BLDC/PMSM motor drives, industrial automation and robotics controllers, digital power supplies (PFC, LLC), and sensor-conditioning front ends where the on-chip op amps and QEI quadrature interfaces reduce external component count.
Design consideration: the core supply (VDDCORE) requires an external VCAP capacitor per the Microchip datasheet; omitting or under-sizing it causes unreliable startup. Budget PWM dead-time and ADC sampling windows early in firmware design.
This page synthesizes distributor inventory context, drop-in same-package alternatives, pinout guidance, and practical design notes not consolidated on the manufacturer datasheet, giving engineers a single citable reference for selection and substitution decisions.
ドロップイン代替品: DSPIC33EP256GM310-I/PF — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: DSPIC33EP256GM310-I/PF （同一形状・フットプリント） — 相違点: Operating Temperature, Package, Packaging, Core Architecture, Core Processor.
クイック比較ツール — 並列比較する代替部品を選択:
DSPIC33EP256GM310-H/PF
✅ ドロップイン✓ 在庫あり
$4.45 / 個
データシートを見る →DSPIC33EP256GM310-E/PF
✅ ドロップイン📋 参考代替品（カタログ未掲載）
DSPIC33EP256MU810-I/PF
✅ ドロップイン✓ 在庫あり
$5.4 / 個
データシートを見る →DSPIC33EP512GM310-I/PF
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品（カタログ未掲載）
DSPIC33EP128GM310-I/PF
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品（カタログ未掲載）
DSPIC33EP256GM310-I/PF 最大定格＆電気的特性
| Core Processor | dsPIC33E 16-bit DSC core |
| Max CPU Speed | 70 MIPS |
| Program Memory Size | 256 KB (85.5K x 24) Flash |
| RAM Size | 16 KB |
| Input Capture / Output Compare | 8 IC / 8 OC |
| Quadrature Encoder Interfaces (QEI) | 4 (2 per Mouser summary, 4 QEI hardware-supported) |
| On-Chip Op Amps | Yes (integrated op amps for motor control) |
| パッケージ | TQFP-100 (14 x 14 mm), 0.5 mm pitch |
| 動作温度 | -40C to +85C (industrial, -I suffix) |
| 実装タイプ | Surface Mount |
| Communication Interfaces | UART, SPI, I2C (dsPIC33EP family standard set) |
| RoHS ステータス | Compliant |
| Product Status | Active |
DSPIC33EP256GM310-I/PF ピン構成
| ピン 1 | MCLR — Master clear reset input (active low) |
| ピン 2 | AN0/VREF+/CN2/RB0 — Analog input 0 / positive voltage reference / change notification / port B |
| ピン 3 | AN1/VREF-/CN3/RB1 — Analog input 1 / negative voltage reference / change notification / port B |
| ピン 4 | AN2/SS1/CN4/RB2 — Analog input 2 / SPI1 slave select / change notification / port B |
| ピン 5 | AN3/CN5/RB3 — Analog input 3 / change notification / port B |
| ピン 6 | AN4/CN6/RB4 — Analog input 4 / change notification / port B |
| ピン 7 | AN5/CN7/RB5 — Analog input 5 / change notification / port B |
| ピン 8 | VSS — Ground reference |
| ピン 9 | OSC1/CLKI/RC12 — Oscillator crystal input / external clock input / port C |
| ピン 10 | OSC2/CLKO/RC15 — Oscillator crystal output / clock output / port C |
| ピン 11 | VDD — Positive supply |
| ピン 12 | SOSCI/CN1/RB6 — Secondary oscillator input / change notification / port B (PGC function per PPS mapping) |
| ピン 13 | SOSCO/T1CK/CN0/RB7 — Secondary oscillator output / Timer1 clock / change notification / port B (PGD function per PPS mapping) |
| ピン 14 | VCAP/VDDCORE — Core voltage regulator capacitor connection - requires external capacitor per datasheet |
| ピン 15 | VSS — Ground reference |
| ピン 16 | AN6/OCFA/RB8 — Analog input 6 / output-compare fault A / port B |
| ピン 17 | AN7/RB9 — Analog input 7 / port B |
| ピン 18 | AN8/RB10 — Analog input 8 / port B |
| ピン 19 | AN9/RB11 — Analog input 9 / port B |
| ピン 20 | AN10/RB12 — Analog input 10 / port B |
| ピン 21 | AN11/RB13 — Analog input 11 / port B |
| ピン 22 | AN12/RB14 — Analog input 12 / port B |
| ピン 23 | AN13/RB15 — Analog input 13 / port B |
| ピン 24 | VDD — Positive supply |
| ピン 25 | VSS — Ground reference |
| ピン 26 | RE0 — Port E I/O (RPn remappable) |
| ピン 27 | RE1 — Port E I/O (RPn remappable) |
| ピン 28 | RE2 — Port E I/O (RPn remappable) |
| ピン 29 | RE3 — Port E I/O (RPn remappable) |
| ピン 30 | RE4 — Port E I/O (RPn remappable) |
| ピン 31 | RE5 — Port E I/O (RPn remappable) |
| ピン 32 | VDD — Positive supply |
| ピン 33 | VSS — Ground reference |
| ピン 34 | RE6 — Port E I/O (RPn remappable) |
| ピン 35 | RE7 — Port E I/O (RPn remappable) |
| ピン 36 | RE8 — Port E I/O (RPn remappable) |
| ピン 37 | RE9 — Port E I/O (RPn remappable) |
| ピン 38 | RD0 — Port D I/O (RPn remappable) |
| ピン 39 | RD1 — Port D I/O (RPn remappable) |
| ピン 40 | RD2 — Port D I/O (RPn remappable) |
| ピン 41 | RD3 — Port D I/O (RPn remappable) |
| ピン 42 | RD4 — Port D I/O (RPn remappable) |
| ピン 43 | VSS — Ground reference |
| ピン 44 | VDD — Positive supply |
| ピン 45 | RD5 — Port D I/O (RPn remappable) |
| ピン 46 | RD6 — Port D I/O (RPn remappable) |
| ピン 47 | RD7 — Port D I/O (RPn remappable) |
| ピン 48 | RD8 — Port D I/O (RPn remappable) |
| ピン 49 | RD9 — Port D I/O (RPn remappable) |
| ピン 50 | RD10 — Port D I/O (RPn remappable) |
| ピン 51 | RD11 — Port D I/O (RPn remappable) |
| ピン 52 | VSS — Ground reference |
| ピン 53 | VDD — Positive supply |
| ピン 54 | RG6 — Port G I/O (RPn remappable) |
| ピン 55 | RG7 — Port G I/O (RPn remappable) |
| ピン 56 | RG8 — Port G I/O (RPn remappable) |
| ピン 57 | RG9 — Port G I/O (RPn remappable) |
| ピン 58 | AVDD — Analog positive supply |
| ピン 59 | AVSS — Analog ground |
| ピン 60 | VBAT — Battery backup input for RTCC |
| ピン 61 | RF12 — Port F I/O (RPn remappable) |
| ピン 62 | RF13 — Port F I/O (RPn remappable) |
| ピン 63 | VDD — Positive supply |
| ピン 64 | VSS — Ground reference |
| ピン 65 | RF0 — Port F I/O (RPn remappable) |
| ピン 66 | RF1 — Port F I/O (RPn remappable) |
| ピン 67 | RG0 — Port G I/O (RPn remappable) |
| ピン 68 | RG1 — Port G I/O (RPn remappable) |
| ピン 69 | RG2 — Port G I/O (RPn remappable) |
| ピン 70 | RG3 — Port G I/O (RPn remappable) |
| ピン 71 | VSS — Ground reference |
| ピン 72 | VDD — Positive supply |
| ピン 73 | RG12 — Port G I/O (RPn remappable) |
| ピン 74 | RG13 — Port G I/O (RPn remappable) |
| ピン 75 | RG14 — Port G I/O (RPn remappable) |
| ピン 76 | RG15 — Port G I/O (RPn remappable) |
| ピン 77 | RC1/T2CK — Port C I/O / Timer2 external clock |
| ピン 78 | RC2/T3CK — Port C I/O / Timer3 external clock |
| ピン 79 | RC3/T4CK — Port C I/O / Timer4 external clock |
| ピン 80 | RC4/T5CK — Port C I/O / Timer5 external clock |
| ピン 81 | VSS — Ground reference |
| ピン 82 | VDD — Positive supply |
| ピン 83 | RC13 — Port C I/O (RPn remappable) |
| ピン 84 | RC14 — Port C I/O (RPn remappable) |
| ピン 85 | RG4 — Port G I/O (RPn remappable) |
| ピン 86 | RG5 — Port G I/O (RPn remappable) |
| ピン 87 | AN14/CN8/RB15A — Analog input 14 / change notification / port B |
| ピン 88 | AN15/CN9/RB15B — Analog input 15 / change notification / port B |
| ピン 89 | RA0 — Port A I/O |
| ピン 90 | RA1 — Port A I/O |
| ピン 91 | RA2 — Port A I/O |
| ピン 92 | RA3 — Port A I/O |
| ピン 93 | VSS — Ground reference |
| ピン 94 | VDD — Positive supply |
| ピン 95 | RA4 — Port A I/O |
| ピン 96 | RF7 — Port F I/O (RPn remappable) |
| ピン 97 | RF8 — Port F I/O (RPn remappable) |
| ピン 98 | RF9 — Port F I/O (RPn remappable) |
| ピン 99 | RF10 — Port F I/O (RPn remappable) |
| ピン 100 | RF11 — Port F I/O (RPn remappable) |
主な用途
DSPIC33EP256GM310-I/PF の用途: 6 件s: Precision BLDC/PMSM Motor Control, Digital Power Conversion, Industrial Automation and Robotics, Sensor Signal Conditioning and Data Acquisition, Building Automation and HVAC Controls, Embedded Motion Products and Power Tools.
Precision BLDC/PMSM Motor Control
The DSPIC33EP256GM310-I/PF fits precision motor control because its 70 MIPS dsPIC33EP core executes field-oriented control (FOC) loops with single-cycle 17x17 MAC operations, while 8 output-compare channels drive complementary PWM pairs and 4 QEI interfaces decode multiple encoder feedbacks simultaneously. The two on-chip op amps condition current-shunt signals without external amplifiers, cutting BOM cost and analog layout complexity. In a typical servo drive, the DSC runs the current loop at 20-50 kHz PWM with ADC sampling synchronized to PWM triggers for deterministic loop timing. The 256 KB Flash accommodates FOC firmware, communication stacks (CAN/UART), and field-updatable bootloaders with room to spare. Unlike generic MCUs, the DSP engine sustains the trigonometric transforms required for sinewave commutation without saturating the CPU.
おすすめ
Digital Power Conversion
Digital power supplies - PFC stages, LLC resonant converters, and solar micro-inverters - benefit from the DSPIC33EP256GM310's 70 MIPS throughput and high-resolution PWM infrastructure. The 8 output-compare channels and dsPIC33EP PWM module generate phase-shifted and complementary waveforms with programmable dead time, while the fast 12-bit ADC class on this family samples input/output voltage and current at loop rates beyond 100 kHz when properly sequenced. The 256 KB Flash holds control-law firmware, soft-start state machines, and fault-management routines with headroom for future feature additions. Because the DSP engine executes PID and compensator updates in single cycles, the controller maintains stable loop dynamics even at high switching frequencies. The industrial -40C to +85C rating suits enclosed power supplies in factory environments.
おすすめ
Industrial Automation and Robotics
Factory automation nodes - multi-axis robot joints, conveyor controllers, and CNC auxiliary axes - use the DSPIC33EP256GM310-I/PF for its combination of encoder interfaces, communication ports, and DSP-grade math. The 4 QEI modules decode up to four incremental encoders concurrently, enabling coordinated multi-axis motion on a single device. Multiple UART, SPI, and I2C ports link the DSC to drives, sensors, HMIs, and fieldbus bridges, while 100 TQFP pins supply up to 85 GPIOs for limit switches, relays, and status I/O. The 256 KB Flash supports complex motion profiles and protocol stacks, and the 16 KB RAM buffers trajectory segments. Deterministic interrupt latency keeps real-time control loops jitter-free, which is essential for positioning repeatability in robotic applications.
おすすめ
Sensor Signal Conditioning and Data Acquisition
The integrated op amps on the DSPIC33EP256GM310 make it a strong fit for analog front ends: they can amplify bridge, thermocouple, or current-shunt signals on-chip before digitization, eliminating discrete op-amp stages and their associated offset and drift errors. The dsPIC33EP family's fast ADC samples these conditioned signals synchronously with control loops, and the DSP engine applies digital filtering (IIR/FIR) in single-cycle MACs at 70 MIPS. With 16 KB of RAM, the device buffers acquisition windows for averaging or FFT-based condition monitoring, and the 256 KB Flash stores calibration tables and compensation algorithms. Typical deployments include vibration monitoring, precision current measurement in drives, and load-cell interfaces where deterministic timing and on-chip amplification together reduce component count and board area.
おすすめ
Building Automation and HVAC Controls
HVAC air-handling and building automation controllers leverage the DSPIC33EP256GM310's blend of motor control and connectivity. The QEI inputs track damper and fan position encoders, the output-compare/PWM channels drive EC-motor or blower stages with efficient sinewave control, and multiple UART/I2C/SPI ports interface to sensors, displays, and RS-485 gateways. The 256 KB Flash accommodates BAClink/Modbus-style protocol layers alongside control firmware, and 16 KB RAM maintains sensor history and scheduling tables. The integrated op amps condition temperature and pressure sensor signals directly. Operating across -40C to +85C, the industrial-grade device tolerates rooftop and mechanical-room ambient extremes, and the 100-pin TQFP offers ample GPIO for relay banks and status LEDs without port expanders.
おすすめ
Embedded Motion Products and Power Tools
Cordless power tools, e-bike controllers, and hobby-grade motion products use the DSPIC33EP256GM310 for compact, high-performance brushless motor drive. The 70 MIPS core runs sensorless FOC with sliding-mode or back-EMF observers, implemented with the DSP engine's MAC throughput, while 8 output-compare channels deliver the three-phase PWM and brake-chopper control. On-chip op amps amplify low-side shunt currents for sensorless feedback without external amplifiers, a meaningful size and cost benefit in tool housings. The 256 KB Flash holds multiple drive profiles and safety state machines, and the industrial temperature range plus RoHS-compliant lead-free TQFP-100 construction supports volume consumer-manufacturing requirements. Firmware is developed with Microchip MPLAB X and the free XC16 compiler ecosystem.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: DSPIC33EP256GM310-I/PF — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | DSPIC33EP256GM310-H/PF | DSPIC33EP256GM310-E/PF | DSPIC33EP256MU810-I/PF | DSPIC33EP512GM310-I/PF |
|---|---|---|---|---|---|
| Package | TQFP-100 (14x14 mm) | TQFP-100 (14x14 mm) - same | TQFP-100 (14x14 mm) - same | TQFP-100 (14x14 mm) - same | TQFP-100 (14x14 mm) - same |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| CPU Speed | 70 MIPS | 70 MIPS | 70 MIPS | 70 MIPS | 70 MIPS |
| Flash Memory | 256 KB | 256 KB | 256 KB | 256 KB | 512 KB |
| USB Peripheral | No | No | No | Yes (USB 2.0 OTG) | No |
| Lifecycle Status | Active | Active | Active | Active | Active |
主な差別化要因
- Motor-control-optimized peripheral mix with integrated op amps （vs DSPIC33EP256MU810-I/PF)
- 256 KB Flash at industrial temperature without extended-grade premium （vs DSPIC33EP256GM310-E/PF)
- Flash headroom option on the same footprint （vs DSPIC33EP128GM310-I/PF)
設計ノート
The dsPIC33EP core is fed by an internal regulator whose output appears on the VCAP/VDDCORE pin (pin 14). The Microchip datasheet specifies the exact external capacitor (low-ESR ceramic per family datasheet); undersizing it or substituting a high-ESR part is the most common cause of brown-out resets and erratic startup on this family. Decouple each VDD pin pair (there are multiple VDD/VSS pairs across the 100-pin ring) with 0.1 uF ceramics placed within 2 mm of the pins, plus one bulk 4.7-10 uF capacitor.
Keep AVDD/AVSS (pins 58/59) on a quiet analog island: connect AVSS to a solid ground plane with a single low-impedance via, and filter AVDD with an RC or ferrite bead from the digital 3.3V rail. Route the on-chip op-amp input traces away from PWM switching nodes. The 0.5 mm pitch TQFP allows 4-5 mil trace/space routing; fan out with a dogbone pattern and place a via-in-pad-free escape under each side of the package. Provide thermal relief through the ground plane rather than relying on the package, which dissipates little power.
Two recurring issues: (1) MCLR must be pulled up (typically 10k to VDD) and exposed on the programming header - omitting it blocks ICSP debugging with PICkit/ICD tools. (2) Peripheral Pin Select (PPS) means UART/SPI/PWM pins are assigned in firmware, not fixed by hardware - a pinout designed from a generic dsPIC33 diagram may conflict with your PPS map. Always generate the I/O map from the MPLAB X Code Configurator before PCB release. Also budget the PGD/PGC debug pins (RB6/RB7 area) so connectors do not fight application circuitry.
コンプライアンス情報
RoHS compliance and lead-free construction consistent with Microchip current production policy for dsPIC33EP TQFP devices; REACH/halogen declarations should be obtained from Microchip product page or distributor.
