Intel

EP1C3T100I7 - 2910 LE Cyclone FPGA, 100-TQFP, Industrial | Intel

Name: EP1C3T100I7 - 2910 LE Cyclone FPGA, 100-TQFP, Industrial | Intel
Brand: Intel
SKU: EP1C3T100I7

MPN: EP1C3T100I7 ✗ Akhir Hidup

1.5 V Vdss 100-TQFP Package 320.1 MHz Speed

Ajukan Diskon

MOQ: 1 |

Lihat Datasheet (PDF) Lihat Alternatif

Kuantitas

EP1C3T100I7 Ringkasan

The Intel EP1C3T100I7 is a low-cost Cyclone FPGA from the Cyclone I family, integrating 2910 logic elements, 59904 bits of embedded RAM, and 65 user I/Os in a 100-pin TQFP package. Built on a 130 nm process with a 1.5 V core supply, the device supports up to 320.1 MHz internal operation and is offered in an industrial temperature grade (-40C to +100C). The EP1C3T100I7 carries the speed grade 7 designation, indicating a balance of timing margin and power consumption suitable for general-purpose logic integration.

A Cyclone FPGA belongs to the field-programmable gate array (FPGA) family, a class of programmable logic devices (PLDs) that allow designers to configure digital logic, memory blocks, and I/O behavior after PCB fabrication. Within the system hierarchy, an FPGA sits between a microcontroller (fixed instruction set, software-defined behavior) and an ASIC (fully custom silicon, no post-fabrication changes). The Cyclone I family was introduced by Altera (later acquired by Intel) in 2002 as a low-cost alternative to the Stratix family, targeting consumer, industrial, and communication applications where deterministic parallel logic was preferred over software execution.

Key features include 2910 logic elements distributed across 291 LABs (Logic Array Blocks), 13 embedded M4K RAM blocks totaling 59904 bits, one PLL for clock management, and 65 user I/Os. The device supports LVTTL, LVCMOS, SSTL-2, and SSTL-3 I/O standards, and is configured via a serial configuration device such as the EPC2 or EPCS family. The 100-pin TQFP package provides a 1.0 mm lead pitch suitable for standard 4-layer PCB designs with no need for microvia or HDI processes.

Architecture-wise, the Cyclone I uses a 4-input look-up table (LUT) based logic fabric with embedded multiplier support for DSP operations, although the EP1C3T100I7 has a limited number of 9x9 multipliers. The device is configured from an external flash memory at power-up, after which it operates deterministically according to the loaded bitstream. The I7 industrial speed grade and -40C to +100C operating range make it suitable for factory automation, motor control, and protocol bridging in environments beyond commercial temperature ranges.

Typical applications include glue logic replacement, custom interface bridging (UART to SPI, I2C to parallel), low-density video processing, industrial sensor aggregation, and education/hobby designs. The wide Quartus II tool support and abundant reference designs make it accessible for prototyping. When designing with the EP1C3T100I7, allocate configuration flash memory (EPCS1 or larger) and respect the 1.5 V core / 3.3 V I/O supply separation. Note that this part is part of an older generation; long-term availability should be confirmed before new designs.

This page synthesizes distributor pricing, drop-in same-family alternatives (such as the EP1C3T100I7N and EP1C3T100C8N), and practical design considerations not collected on any single datasheet or distributor listing.

Alternatif penggantian untuk EP1C3T100I7 — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.

Variasi di dalam seri ini

Model-series yang sama yang kompatibel dengan penggantian EP1C3T100I7 (sama faktor bentuk dan footprint) — berbeda di dalam Package, Family, Speed Grade, Total RAM Bits, Operating Temperature.

EP1C3T100C6

Intel

Package: TQFP-100 (100-TQFP)

Family: Cyclone (Cyclone I)

Speed Grade: -6 (C6)