EPF8820ATC100-2N - FLEX 8000 FPGA, 672 LEs, TQFP-100 | Altera
MPN: EPF8820ATC100-2N ✗ Akhir HidupEPF8820ATC100-2N Ringkasan
The FLEX 8000 family combines the architectural advantages of both erasable programmable logic devices (EPLDs) and field-programmable gate arrays (FPGAs). As a CPLD/FPGA hybrid class, FLEX 8000 devices occupy the mid-density programmable logic hierarchy between small PLDs and high-end SRAM FPGAs: they fit above simple gate arrays (PAL/GAL), alongside early-generation CPLDs, and below modern high-density FPGAs in both logic capacity and pin count.
Key features include 8 Embedded Array Blocks (EABs) for implementing RAM, ROM, or FIFO functions, tri-state buffer emulation on every I/O pin for bus-oriented designs, and a -2 speed grade suitable for commercial logic integration. The device supports JTAG boundary-scan testing, conforms to PCI bus interface standards with appropriate clamping, and provides 5V-tolerant I/O on the 5.0V VCCIO variant. The TQFP-100 (TC100) 14x14 mm package offers a thermal resistance theta_JA of approximately 47 C/W with standard PCB copper.
Typical applications include legacy industrial control systems, glue-logic replacement for discrete 74-series TTL, PCI bus interface bridges, multi-drop bus arbitration, and embedded controller co-processing. The 672-LE capacity suits designs that exceed simple PLD capability but do not require modern high-density FPGAs, making the FLEX 8000 family a cost-effective upgrade path for mature designs.
When designing with this device, ensure configuration is loaded from a valid serial or parallel EPROM at every power-up. Provide a clean 5V core supply with decoupling capacitors placed close to VCC pins, and respect setup/hold times for the -2 speed grade. The TC100 package requires a 1.0 mm pitch PCB land pattern and standard reflow profile for surface-mount assembly.
Alternatif penggantian untuk EPF8820ATC100-2N — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.
Variasi di dalam seri ini
Model-series yang sama yang kompatibel dengan penggantian EPF8820ATC100-2N (sama faktor bentuk dan footprint) — berbeda di dalam Package, Process Technology, Speed Grade, Configuration Method, Logic Array Blocks (LABs).
EPF8820ATC100-2
✅ Drop-InKontak untuk harga
Lihat Datasheet →EPF8636ATC100-2N
✅ Drop-In📋 Alternatif referensi (tidak dalam katalog)
EPF8452ATC100-4N
✅ Drop-InKontak untuk harga
Lihat Datasheet →EPF6024ATC100-10
✅ Drop-InKontak untuk harga
Lihat Datasheet →EPF8282ATC100-2
✅ Drop-InKontak untuk harga
Lihat Datasheet →EPF8820ATC100-2N Rating Maksimal & Karakteristik Listrik
| Family | FLEX 8000 |
| Logic Elements (LEs) | 672 |
| Flipflops | 672 |
| Logic Array Blocks (LABs) | 84 (8 LEs each) |
| Embedded Array Blocks (EABs) | 8 |
| Total RAM Bits | 16384 (2048 x 8 per EAB) |
| Maximum User I/O Pins | 68 |
| FastTrack Interconnect Rows | 8 |
| Paket | TQFP-100 (TC100) 14x14 mm |
| Speed Grade | -2 |
| Process Technology | 0.42 µm CMOS SRAM |
| Core Voltage (VCCINT) | 5.0 V |
| I/O Voltage (VCCIO) | 5.0 V |
| Suhu Kerja | -40C to +85C (industrial) |
| Configuration Method | Serial or parallel EPROM |
| JTAG Support | Yes (IEEE 1149.1 boundary-scan) |
Konfigurasi Pin EPF8820ATC100-2N
| Pin produk 1 | I/O — User I/O pin (bidirectional, tri-state capable) |
| Pin produk 2 | I/O — User I/O pin |
| Pin produk 3 | I/O — User I/O pin |
| Pin produk 4 | I/O — User I/O pin |
| Pin produk 5 | VCCINT — Core supply voltage (5.0V) |
| Pin produk 6 | I/O — User I/O pin |
| Pin produk 7 | I/O — User I/O pin |
| Pin produk 8 | I/O — User I/O pin |
| Pin produk 9 | I/O — User I/O pin |
| Pin produk 10 | GND — Ground |
| Pin produk 11 | I/O — User I/O pin |
| Pin produk 12 | I/O — User I/O pin |
| Pin produk 13 | I/O — User I/O pin |
| Pin produk 14 | I/O — User I/O pin |
| Pin produk 15 | I/O — User I/O pin |
| Pin produk 16 | VCCIO — I/O supply voltage (5.0V) |
| Pin produk 17 | I/O — User I/O pin |
| Pin produk 18 | I/O — User I/O pin |
| Pin produk 19 | I/O — User I/O pin |
| Pin produk 20 | I/O — User I/O pin |
| Pin produk 21 | I/O — User I/O pin |
| Pin produk 22 | GND — Ground |
| Pin produk 23 | I/O — User I/O pin |
| Pin produk 24 | I/O — User I/O pin |
| Pin produk 25 | I/O — User I/O pin |
| Pin produk 26 | I/O — User I/O pin |
| Pin produk 27 | I/O — User I/O pin |
| Pin produk 28 | VCCINT — Core supply voltage (5.0V) |
| Pin produk 29 | I/O — User I/O pin |
| Pin produk 30 | I/O — User I/O pin |
| Pin produk 31 | I/O — User I/O pin |
| Pin produk 32 | I/O — User I/O pin |
| Pin produk 33 | I/O — User I/O pin |
| Pin produk 34 | GND — Ground |
| Pin produk 35 | I/O — User I/O pin |
| Pin produk 36 | I/O — User I/O pin |
| Pin produk 37 | I/O — User I/O pin |
| Pin produk 38 | I/O — User I/O pin |
| Pin produk 39 | I/O — User I/O pin |
| Pin produk 40 | VCCIO — I/O supply voltage (5.0V) |
| Pin produk 41 | I/O — User I/O pin |
| Pin produk 42 | I/O — User I/O pin |
| Pin produk 43 | I/O — User I/O pin |
| Pin produk 44 | I/O — User I/O pin |
| Pin produk 45 | I/O — User I/O pin |
| Pin produk 46 | GND — Ground |
| Pin produk 47 | I/O — User I/O pin |
| Pin produk 48 | I/O — User I/O pin |
| Pin produk 49 | I/O — User I/O pin |
| Pin produk 50 | I/O — User I/O pin |
| Pin produk 51 | I/O — User I/O pin |
| Pin produk 52 | VCCINT — Core supply voltage (5.0V) |
| Pin produk 53 | I/O — User I/O pin |
| Pin produk 54 | I/O — User I/O pin |
| Pin produk 55 | I/O — User I/O pin |
| Pin produk 56 | I/O — User I/O pin |
| Pin produk 57 | I/O — User I/O pin |
| Pin produk 58 | GND — Ground |
| Pin produk 59 | I/O — User I/O pin |
| Pin produk 60 | I/O — User I/O pin |
| Pin produk 61 | I/O — User I/O pin |
| Pin produk 62 | I/O — User I/O pin |
| Pin produk 63 | I/O — User I/O pin |
| Pin produk 64 | VCCIO — I/O supply voltage (5.0V) |
| Pin produk 65 | I/O — User I/O pin |
| Pin produk 66 | I/O — User I/O pin |
| Pin produk 67 | I/O — User I/O pin |
| Pin produk 68 | I/O — User I/O pin |
| Pin produk 69 | I/O — User I/O pin |
| Pin produk 70 | GND — Ground |
| Pin produk 71 | I/O — User I/O pin |
| Pin produk 72 | I/O — User I/O pin |
| Pin produk 73 | I/O — User I/O pin |
| Pin produk 74 | I/O — User I/O pin |
| Pin produk 75 | I/O — User I/O pin |
| Pin produk 76 | VCCINT — Core supply voltage (5.0V) |
| Pin produk 77 | I/O — User I/O pin |
| Pin produk 78 | I/O — User I/O pin |
| Pin produk 79 | I/O — User I/O pin |
| Pin produk 80 | I/O — User I/O pin |
| Pin produk 81 | I/O — User I/O pin |
| Pin produk 82 | GND — Ground |
| Pin produk 83 | I/O — User I/O pin |
| Pin produk 84 | I/O — User I/O pin |
| Pin produk 85 | I/O — User I/O pin |
| Pin produk 86 | I/O — User I/O pin |
| Pin produk 87 | I/O — User I/O pin |
| Pin produk 88 | VCCIO — I/O supply voltage (5.0V) |
| Pin produk 89 | TDI — JTAG test data input |
| Pin produk 90 | TMS — JTAG test mode select |
| Pin produk 91 | TCK — JTAG test clock |
| Pin produk 92 | TDO — JTAG test data output |
| Pin produk 93 | nSTATUS — Configuration status (open-drain) |
| Pin produk 94 | nCONFIG — Configuration start input (active-low) |
| Pin produk 95 | DCLK — Configuration clock input |
| Pin produk 96 | DATA0 — Configuration data input |
| Pin produk 97 | CONF_DONE — Configuration complete output |
| Pin produk 98 | GND — Ground |
| Pin produk 99 | I/O — User I/O pin |
| Pin produk 100 | I/O — User I/O pin |
Aplikasi Umum
EPF8820ATC100-2N cocok untuk 7 aplikasis: Legacy Industrial Glue Logic, PCI Bus Interface Bridge, Multi-Drop Bus Arbitration, Embedded Controller Co-Processor, Test and Measurement Instrumentation, Automotive Aftermarket ECU Retrofits, Educational and Prototyping Platforms.
Legacy Industrial Glue Logic
The EPF8820ATC100-2N's 672 Logic Elements and tri-state bus emulation on every I/O pin make it well suited to replace multiple discrete 74-series TTL packages in legacy industrial controllers. With 68 user I/O pins in the TQFP-100 footprint, it can absorb glue logic between microprocessors, memory, and peripheral ICs that previously required dozens of discrete gates. The -2 speed grade supports 5V TTL clock rates up to 80 MHz, sufficient for typical 8/16-bit industrial bus glue. Designers can re-program the same PCB for variants, avoiding re-spin tooling.
Direkomendasikan
PCI Bus Interface Bridge
The EPF8820ATC100-2N is suitable for implementing PCI 5V target and initiator state machines, address decoding, and bus arbitration logic with appropriate external clamping diodes on the I/O lines. Its 672 LEs accommodate typical PCI bridge designs including configuration space registers, target/initiator state machines, and parity logic. The 16384-bit on-chip RAM via 8 Embedded Array Blocks (EABs) supports small FIFOs for PCI bus mastering. The TQFP-100 industrial-grade temperature range fits PCI expansion card operating environments.
Direkomendasikan
Multi-Drop Bus Arbitration
Multi-drop bus arbitration designs benefit from the EPF8820ATC100-2N's tri-state buffer emulation on every I/O pin, allowing clean implementation of bidirectional bus transceivers, request/grant priority encoders, and mailbox registers. The 672-LE capacity supports dozens of bus participants with per-device handshake logic. The 8 EABs provide small RAM tables for mailbox and FIFO data buffering. The 5V-tolerant I/O interfaces directly with backplane transceivers used in industrial fieldbus systems.
Direkomendasikan
Embedded Controller Co-Processor
The EPF8820ATC100-2N serves as a custom co-processor for 8-bit and 16-bit embedded microcontrollers, offloading time-critical DSP filters, motor-control state machines, or protocol stacks. With 672 LEs and 16384 bits of RAM, it implements FIR filters, PID controllers, or UART/SPI slaves that run deterministically at the FPGA clock. The TQFP-100 industrial temperature range meets harsh embedded environments. Configuration is loaded from a serial EPROM at boot, requiring no host-side driver support.
Direkomendasikan
Test and Measurement Instrumentation
The EPF8820ATC100-2N's flexible I/O and reconfigurable logic make it useful for digital test fixtures, custom protocol analyzers, and laboratory instrumentation front-ends. The 672 LEs support pattern generators, timing generators, and stimulus-response comparators. JTAG boundary scan support enables production-board interconnect testing. The industrial temperature range supports test-fixture deployment in factory environments. Legacy FLEX 8000 designs in existing ATE systems can be replicated for spares and replacements.
Direkomendasikan
Automotive Aftermarket ECU Retrofits
The EPF8820ATC100-2N's industrial temperature range (-40C to +85C) and robust 5V supply tolerance support automotive aftermarket ECU retrofit applications where legacy fuel injection or engine management electronics need custom glue logic or signal conditioning. The 672 LEs handle injector driver timing, sensor signal multiplexing, and CAN/LIN slave interfaces. While not AEC-Q100 qualified, the industrial grade meets many aftermarket requirements. Drop-in compatibility with EPF8820ATC100-2 allows flexibility in RoHS or non-RoHS end-product assembly.
Direkomendasikan
Educational and Prototyping Platforms
Universities and engineering training programs continue to use the EPF8820ATC100-2N in digital logic and computer architecture courses because the FLEX 8000 architecture is straightforward to teach. The 672-LE capacity fits labs on FSM design, CPU datapaths, and simple SoCs. TQFP-100 is hand-solderable on breakout boards for student projects. Despite being obsolete, the part is widely available in the surplus market at low cost, making it a budget-friendly platform for teaching programmable logic fundamentals.
Direkomendasikan
Ringkasan Produk Direkomendasikan
Data referensi engineering untuk EPF8820ATC100-2N — pembandingan, panduan desain, dan informasi konformitas.
Panduan Pemilihan
Pembandingan dengan Alternatif
| Parameter Umum | Produk Ini | EPF8820ATC100-2 | EPF8636ATC100-2N | EPF8452ATC100-4N | EPF6024ATC100-10 | EPF8282ATC100-2 |
|---|---|---|---|---|---|---|
| Brand | Altera (Intel) | Altera (Intel) | Altera (Intel) | Altera (Intel) | Altera (Intel) | Altera (Intel) |
| Package | TQFP-100 (TC100) 14x14 mm | TQFP-100 (TC100) 14x14 mm - same | TQFP-100 (TC100) 14x14 mm - same | TQFP-100 (TC100) 14x14 mm - same | TQFP-100 (TC100) 14x14 mm - same | TQFP-100 (TC100) 14x14 mm - same |
| Family | FLEX 8000 | FLEX 8000 | FLEX 8000 | FLEX 8000 | FLEX 6000 | FLEX 8000 |
| Logic Elements (LEs) | 672 | 672 | 504 (-25%) | 336 (-50%) | 16 (-97%) | 208 (-69%) |
| RAM Bits (EAB) | 16384 | 16384 | 12288 (-25%) | 8192 (-50%) | 0 (no EAB) | 8192 (-50%) |
| Speed Grade | -2 | -2 | -2 | -4 (slower) | -10 (slowest) | -2 |
| Core Voltage | 5.0 V | 5.0 V | 5.0 V | 5.0 V | 5.0 V | 5.0 V |
| Lifecycle Status | Obsolete | Obsolete | Obsolete | Obsolete | Obsolete | Obsolete |
Diferensiator Kunci
- Highest logic capacity in the FLEX 8000 TQFP-100 package family (vsEPF8636ATC100-2N)
- Lead-free RoHS-compliant assembly per -N ordering code (vsEPF8820ATC100-2)
- Embedded Array Blocks (EABs) for on-chip RAM, ROM, and FIFO (vsEPF6024ATC100-10 (FLEX 6000))
Catatan Desain
The EPF8820ATC100-2N requires a stable 5.0V supply on both VCCINT and VCCIO pins; place 0.1 µF ceramic decoupling capacitors adjacent to every VCC/GND pin pair on the TQFP-100 package. Bulk 10 µF tantalum decoupling on each supply rail reduces switching transients. Power-on ramp should be monotonic and less than 100 ms to ensure clean configuration; for systems with slow-ramping supplies, add a POR supervisor to hold nCONFIG low until the rail reaches 4.75V. Estimated Icc (active) is approximately 250 mA at full speed across 672 LEs - verify against the FLEX 8000 datasheet worst-case Icc curve for thermal budgeting.
The TQFP-100 (TC100) package has a thermal resistance theta_JA of approximately 47 C/W on a standard 4-layer JEDEC test PCB with minimal copper. At maximum Icc of 250 mA (estimated) at 5.0V, the device dissipates about 1.25 W worst case, yielding a 59C junction-temperature rise above ambient (estimated: P=1.25W, theta_JA=47 C/W). For continuous operation above 60C ambient, use 1 oz copper pours connected to the GND pins and consider airflow. Industrial-temperature designs targeting +85C ambient need at least 0.5 square inches of additional top-side copper under the package.
Route all JTAG signals (TDI, TMS, TCK, TDO) as a single daisy-chained bus with 10 kΩ pull-ups on TMS and TDI per IEEE 1149.1 requirements. Keep configuration signals (nCONFIG, nSTATUS, CONF_DONE, DCLK, DATA0) short and isolated from high-frequency switching nets; nSTATUS and CONF_DONE are open-drain and require 10 kΩ pull-ups to VCCIO. The TQFP-100 has a 0.5 mm lead pitch - use 0.20 mm solder paste stencil apertures and follow IPC-7351 land pattern guidelines. Place the serial configuration EPROM (EPC1/EPC1213/EPC1064/EPC1441) within 50 mm of DCLK to minimize skew.
Do not apply 3.3V directly to the I/O pins without verifying 5V tolerance via the datasheet - although the EPF8820ATC100-2N is a 5V part, some legacy FLEX 8000 device variants have 3.3V-only I/O. Always wait for CONF_DONE to assert before driving user I/O pins from external sources, or use the bus-hold feature during configuration. The -2 speed grade is the fastest commercial speed; if timing closure fails, step down to -3 or -4 instead of over-constraining. Configuration time is approximately 100 ms at 10 MHz DCLK - budget POR supervisor timeout accordingly.
Informasi Konformitas
Lead-free per -N ordering suffix; RoHS compliant. Not AEC-Q100 qualified - this is a commercial/industrial-grade part. Halogen-free status and conflict-mineral compliance not explicitly stated in the manufacturer datasheet and marked unknown.
