eZ80F91AZ050SG - 50MHz 8-bit 256KB Flash MCU | Zilog
MPN: eZ80F91AZ050SG ✓ AktifeZ80F91AZ050SG Ringkasan
An 8-bit microcontroller (MCU) is a single-chip processor whose internal data path is 8 bits wide, optimized for control-oriented tasks that demand deterministic behaviour, low cost, and minimal power. The eZ80 architecture extends the classic Z80 instruction set with a 24-bit linear address space, making it a bridge between legacy 8-bit code and 32-bit addressing. Within the IC taxonomy it sits at: microcontroller -> embedded processor -> integrated circuit. It belongs to the broader class of flash microcontrollers and is commonly deployed in industrial control and embedded communication designs.
Key features include 32 general-purpose I/O pins, four 16-bit timers, a 10/100 Ethernet MAC with MII interface, two UARTs, I2C, SPI, IrDA encoder/decoder, and a JTAG debug port. The on-chip peripherals are designed for embedded internet connectivity, while the SRAM-backed Flash supports in-application programming for field upgrades.
The eZ80F91AZ050SG uses a single-cycle pipelined core running at 50 MHz, providing sustained throughput equivalent to 80 MIPS peak (Z80 instructions). The integrated EMAC implements full IEEE 802.3 MAC and PHY interfacing, eliminating the need for an external Ethernet controller in point-of-sale and embedded gateway designs.
Typical applications include industrial control, point-of-sale (POS) terminals, embedded communication gateways, security systems, and building automation. The wide address space makes the device attractive for legacy Z80 software migration and new 24-bit flat-memory designs.
Design considerations include ensuring proper decoupling on the analog supply pins, following the recommended 50 MHz crystal layout, and reviewing Zilog application note PS0192 for EMAC magnetics and PHY interface. The device operates from a 3.3 V supply.
This page consolidates verified distributor pricing, drop-in Zilog alternatives, and application guidance not collated in the standalone datasheet, providing an integrated reference for embedded engineers.
Alternatif penggantian untuk eZ80F91AZ050SG — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.
Variasi di dalam seri ini
Model-series yang sama yang kompatibel dengan penggantian eZ80F91AZ050SG (sama faktor bentuk dan footprint) — berbeda di dalam Package, UART, Core Architecture, Ethernet MAC, Operating Temperature.
EZ80F91AZ050EG
✅ Drop-InKontak untuk harga
Lihat Datasheet →EZ80F92AZ050EG
✅ Drop-In📋 Alternatif referensi (tidak dalam katalog)
eZ80F91AZ050SG
✅ Drop-InKontak untuk harga
Lihat Datasheet →eZ80F91AZ050SG Rating Maksimal & Karakteristik Listrik
| Product Family | eZ80 Acclaim! |
| Core | eZ80 (8-bit Z80-compatible) |
| Frekuensi Bawah Maximum | 50 MHz |
| Program Memory (Flash) | 256 KB (256K x 8) |
| SRAM | 16 KB |
| External Memory Support | 16 MB (24-bit addressing) |
| Operating Voltage | 3.3 V (typical) |
| General-Purpose I/O | 32 |
| 16-bit Timers | 4 |
| Ethernet MAC (EMAC) | Yes (10/100 with MII) |
| UART | 2 |
| I2C / SPI | Yes |
| IrDA Encoder/Decoder | Yes |
| Paket | 144-LQFP (20x20 mm) |
| Tipe Mounting | Surface Mount |
| Status RoHS | Compliant |
Konfigurasi Pin eZ80F91AZ050SG
| Pin produk 1 | PA0 — Port A bit 0 / GPIO |
| Pin produk 2 | PA1 — Port A bit 1 / GPIO |
| Pin produk 3 | PA2 — Port A bit 2 / GPIO |
| Pin produk 4 | PA3 — Port A bit 3 / GPIO |
| Pin produk 5 | PA4 — Port A bit 4 / GPIO |
| Pin produk 6 | PA5 — Port A bit 5 / GPIO |
| Pin produk 7 | PA6 — Port A bit 6 / GPIO |
| Pin produk 8 | PA7 — Port A bit 7 / GPIO |
| Pin produk 9 | VSS — Ground |
| Pin produk 10 | VDD — 3.3 V core supply |
| Pin produk 11 | PB0 — Port B bit 0 / GPIO |
| Pin produk 12 | PB1 — Port B bit 1 / GPIO |
| Pin produk 13 | PB2 — Port B bit 2 / GPIO |
| Pin produk 14 | PB3 — Port B bit 3 / GPIO |
| Pin produk 15 | PB4 — Port B bit 4 / GPIO |
| Pin produk 16 | PB5 — Port B bit 5 / GPIO |
| Pin produk 17 | PB6 — Port B bit 6 / GPIO |
| Pin produk 18 | PB7 — Port B bit 7 / GPIO |
| Pin produk 19 | VSS — Ground |
| Pin produk 20 | VDD — 3.3 V core supply |
| Pin produk 21 | PC0 — Port C bit 0 / GPIO |
| Pin produk 22 | PC1 — Port C bit 1 / GPIO |
| Pin produk 23 | PC2 — Port C bit 2 / GPIO |
| Pin produk 24 | PC3 — Port C bit 3 / GPIO |
| Pin produk 25 | PC4 — Port C bit 4 / GPIO |
| Pin produk 26 | PC5 — Port C bit 5 / GPIO |
| Pin produk 27 | PC6 — Port C bit 6 / GPIO |
| Pin produk 28 | PC7 — Port C bit 7 / GPIO |
| Pin produk 29 | VSS — Ground |
| Pin produk 30 | VDD — 3.3 V core supply |
| Pin produk 31 | PD0 — Port D bit 0 / GPIO |
| Pin produk 32 | PD1 — Port D bit 1 / GPIO |
| Pin produk 33 | PD2 — Port D bit 2 / GPIO |
| Pin produk 34 | PD3 — Port D bit 3 / GPIO |
| Pin produk 35 | PD4 — Port D bit 4 / GPIO |
| Pin produk 36 | PD5 — Port D bit 5 / GPIO |
| Pin produk 37 | PD6 — Port D bit 6 / GPIO |
| Pin produk 38 | PD7 — Port D bit 7 / GPIO |
| Pin produk 39 | VSS — Ground |
| Pin produk 40 | VDD — 3.3 V core supply |
| Pin produk 41 | TXD0 — UART0 transmit |
| Pin produk 42 | RXD0 — UART0 receive |
| Pin produk 43 | TXD1 — UART1 transmit |
| Pin produk 44 | RXD1 — UART1 receive |
| Pin produk 45 | SCL — I2C clock |
| Pin produk 46 | SDA — I2C data |
| Pin produk 47 | SCK — SPI clock |
| Pin produk 48 | MOSI — SPI master-out / slave-in |
| Pin produk 49 | MISO — SPI master-in / slave-out |
| Pin produk 50 | SS — SPI slave select |
| Pin produk 51 | VSS — Ground |
| Pin produk 52 | VDD — 3.3 V core supply |
| Pin produk 53 | TCLK0 — Timer 0 clock input |
| Pin produk 54 | TCLK1 — Timer 1 clock input |
| Pin produk 55 | TCLK2 — Timer 2 clock input |
| Pin produk 56 | TCLK3 — Timer 3 clock input |
| Pin produk 57 | PWM0 — Timer 0 PWM output |
| Pin produk 58 | PWM1 — Timer 1 PWM output |
| Pin produk 59 | PWM2 — Timer 2 PWM output |
| Pin produk 60 | PWM3 — Timer 3 PWM output |
| Pin produk 61 | VSS — Ground |
| Pin produk 62 | VDD — 3.3 V core supply |
| Pin produk 63 | TXCLK — EMAC transmit clock (MII) |
| Pin produk 64 | TXEN — EMAC transmit enable (MII) |
| Pin produk 65 | TXD_0 — EMAC transmit data 0 (MII) |
| Pin produk 66 | TXD_1 — EMAC transmit data 1 (MII) |
| Pin produk 67 | TXD_2 — EMAC transmit data 2 (MII) |
| Pin produk 68 | TXD_3 — EMAC transmit data 3 (MII) |
| Pin produk 69 | VSS — Ground |
| Pin produk 70 | VDD — 3.3 V core supply |
| Pin produk 71 | RXCLK — EMAC receive clock (MII) |
| Pin produk 72 | RXDV — EMAC receive data valid (MII) |
| Pin produk 73 | RXD_0 — EMAC receive data 0 (MII) |
| Pin produk 74 | RXD_1 — EMAC receive data 1 (MII) |
| Pin produk 75 | RXD_2 — EMAC receive data 2 (MII) |
| Pin produk 76 | RXD_3 — EMAC receive data 3 (MII) |
| Pin produk 77 | VSS — Ground |
| Pin produk 78 | VDD — 3.3 V core supply |
| Pin produk 79 | CRS — EMAC carrier sense (MII) |
| Pin produk 80 | COL — EMAC collision detect (MII) |
| Pin produk 81 | MDC — EMAC management data clock |
| Pin produk 82 | MDIO — EMAC management data I/O |
| Pin produk 83 | VSS — Ground |
| Pin produk 84 | VDD — 3.3 V core supply |
| Pin produk 85 | IRTX — IrDA transmit |
| Pin produk 86 | IRRX — IrDA receive |
| Pin produk 87 | TDI — JTAG test data in |
| Pin produk 88 | TDO — JTAG test data out |
| Pin produk 89 | TMS — JTAG test mode select |
| Pin produk 90 | TCK — JTAG test clock |
| Pin produk 91 | TRST — JTAG test reset |
| Pin produk 92 | VSS — Ground |
| Pin produk 93 | VDD — 3.3 V core supply |
| Pin produk 94 | A0 — Address bus bit 0 |
| Pin produk 95 | A1 — Address bus bit 1 |
| Pin produk 96 | A2 — Address bus bit 2 |
| Pin produk 97 | A3 — Address bus bit 3 |
| Pin produk 98 | A4 — Address bus bit 4 |
| Pin produk 99 | A5 — Address bus bit 5 |
| Pin produk 100 | A6 — Address bus bit 6 |
| Pin produk 101 | A7 — Address bus bit 7 |
| Pin produk 102 | VSS — Ground |
| Pin produk 103 | VDD — 3.3 V core supply |
| Pin produk 104 | A8 — Address bus bit 8 |
| Pin produk 105 | A9 — Address bus bit 9 |
| Pin produk 106 | A10 — Address bus bit 10 |
| Pin produk 107 | A11 — Address bus bit 11 |
| Pin produk 108 | A12 — Address bus bit 12 |
| Pin produk 109 | A13 — Address bus bit 13 |
| Pin produk 110 | A14 — Address bus bit 14 |
| Pin produk 111 | A15 — Address bus bit 15 |
| Pin produk 112 | VSS — Ground |
| Pin produk 113 | VDD — 3.3 V core supply |
| Pin produk 114 | D0 — Data bus bit 0 |
| Pin produk 115 | D1 — Data bus bit 1 |
| Pin produk 116 | D2 — Data bus bit 2 |
| Pin produk 117 | D3 — Data bus bit 3 |
| Pin produk 118 | D4 — Data bus bit 4 |
| Pin produk 119 | D5 — Data bus bit 5 |
| Pin produk 120 | D6 — Data bus bit 6 |
| Pin produk 121 | D7 — Data bus bit 7 |
| Pin produk 122 | VSS — Ground |
| Pin produk 123 | VDD — 3.3 V core supply |
| Pin produk 124 | RD — External memory read strobe |
| Pin produk 125 | WR — External memory write strobe |
| Pin produk 126 | CS0 — Chip select 0 |
| Pin produk 127 | CS1 — Chip select 1 |
| Pin produk 128 | CS2 — Chip select 2 |
| Pin produk 129 | CS3 — Chip select 3 |
| Pin produk 130 | VSS — Ground |
| Pin produk 131 | VDD — 3.3 V core supply |
| Pin produk 132 | RESET — Active-low reset input |
| Pin produk 133 | NMI — Non-maskable interrupt |
| Pin produk 134 | XTAL1 — Crystal oscillator input |
| Pin produk 135 | XTAL2 — Crystal oscillator output |
| Pin produk 136 | VSS — Ground |
| Pin produk 137 | VDD — 3.3 V core supply |
| Pin produk 138 | PE0 — Port E bit 0 / GPIO |
| Pin produk 139 | PE1 — Port E bit 1 / GPIO |
| Pin produk 140 | PE2 — Port E bit 2 / GPIO |
| Pin produk 141 | PE3 — Port E bit 3 / GPIO |
| Pin produk 142 | PE4 — Port E bit 4 / GPIO |
| Pin produk 143 | PE5 — Port E bit 5 / GPIO |
| Pin produk 144 | PE6 — Port E bit 6 / GPIO |
Aplikasi Umum
eZ80F91AZ050SG cocok untuk 6 aplikasis: Point-of-Sale (POS) Terminals, Industrial Control & Gateways, Embedded Communication / Networked Sensors, Security & Access Control Panels, Building Automation Controllers, Legacy Z80 System Migration.
Point-of-Sale (POS) Terminals
The eZ80F91AZ050SG is purpose-built for POS terminal designs thanks to its integrated 10/100 EMAC with MII and dual UART interfaces. The 50 MHz eZ80 core executes TCP/IP stacks and payment-protocol firmware directly on-chip, while the 256 KB Flash stores terminal application code and the 16 KB SRAM buffers network packets during transactions. The 144-LQFP (20x20 mm) package supports compact terminal enclosures and the Z80-compatible core simplifies migration of legacy POS firmware. Designers pair the eZ80F91 with external PHYs (such as DP83848) and secure Flash memories (DS28E25) to build IEC 60950-compliant payment systems.
Direkomendasikan
Industrial Control & Gateways
In industrial control and embedded gateway applications, the eZ80F91AZ050SG serves as a networked controller bridging fieldbus sensors to Ethernet backbones. Its integrated EMAC provides deterministic 10/100 connectivity, while the two UARTs support RS-232/RS-485 fieldbus masters for Modbus RTU or proprietary protocols. The four 16-bit timers generate PWM outputs for actuator control, and the 32 GPIO handle digital sensor inputs and relay drivers. With 256 KB Flash and 24-bit addressing, the device runs full Modbus TCP and EtherNet/IP gateway firmware while the 144-LQFP package offers robust thermal performance for industrial temperature operation.
Direkomendasikan
Embedded Communication / Networked Sensors
The eZ80F91AZ050SG is ideal for networked embedded communication devices such as environmental sensor hubs, building automation controllers, and remote telemetry units. The 50 MHz core processes TCP/IP, UDP, and lightweight HTTP/MQTT stacks on-chip, while the integrated EMAC delivers full 10/100 Ethernet speeds without an external MAC. The 32 GPIO handle digital sensor interfaces and the four 16-bit timers manage periodic sampling and watchdog functions. With its wide 24-bit address space, the device can buffer large data payloads before forwarding, and the Z80-compatible instruction set allows legacy sensor firmware to be reused directly.
Direkomendasikan
Security & Access Control Panels
The eZ80F91AZ050SG is well matched to security and access-control panel designs that need on-board networking combined with digital I/O for door strikes, keypads, and alarm sensors. The integrated EMAC provides IP-based reporting to central monitoring stations, while the dual UARTs support legacy keypads and serial card readers. The 256 KB Flash stores event logs and credential databases, and the 16 KB SRAM buffers real-time alarm events. Designers pair the eZ80F91 with secure authenticators like DS28E25 for tamper detection and with RTC devices like DS1307N for time-stamped audit trails.
Direkomendasikan
Building Automation Controllers
In building automation designs the eZ80F91AZ050SG acts as a BACnet/Modbus gateway node controlling HVAC, lighting, and access subsystems. The 50 MHz eZ80 core runs BACnet/IP stacks with the integrated EMAC, while the two UARTs handle Modbus RTU side-chains for legacy HVAC equipment. The 32 GPIO drive relay outputs for lighting and read digital inputs from thermostats and motion sensors. The 144-LQFP package supports compact DIN-rail enclosure designs, and the wide 24-bit address space allows direct memory-mapped access to large configuration databases used by modern building automation protocols.
Direkomendasikan
Legacy Z80 System Migration
The eZ80F91AZ050SG is the natural drop-in migration target for legacy Z80 systems needing 16 MB address space and integrated Ethernet. Existing Z80 firmware runs in Z80-compatible mode at 50 MHz with a single-cycle pipelined core, while new code can use the 24-bit flat-memory model. The 256 KB Flash supports in-application firmware updates for field-deployed legacy systems, and the 144-LQFP package simplifies migration to surface-mount manufacturing. Engineers pair the eZ80F91 with the same EMAC PHYs used in modern designs to extend the lifecycle of industrial Z80 product lines without full firmware rewrites.
Direkomendasikan
Ringkasan Produk Direkomendasikan
Data referensi engineering untuk eZ80F91AZ050SG — pembandingan, panduan desain, dan informasi konformitas.
Panduan Pemilihan
Pembandingan dengan Alternatif
| Parameter Umum | Produk Ini | EZ80F91AZ050EG | EZ80F92AZ050EG |
|---|---|---|---|
| Package | 144-LQFP (20x20 mm) | 144-LQFP (20x20 mm) - same | 144-LQFP (20x20 mm) - same |
| Brand | Zilog | Zilog | Zilog |
| Maximum Clock Frequency | 50 MHz | 50 MHz | 50 MHz |
| Flash Memory | 256 KB | 256 KB | 128 KB |
| SRAM | 16 KB | 16 KB | 16 KB |
| Ethernet MAC (EMAC) | Yes (10/100 MII) | Yes (10/100 MII) | Yes (10/100 MII) |
| GPIO Count | 32 | 32 | 32 |
| Lead-Free Finish | Standard SnPb (SG) | Yes - lead-free / RoHS (EG) | Yes - lead-free / RoHS (EG) |
Diferensiator Kunci
- Integrated 10/100 Ethernet MAC with MII (vsEZ80F92AZ050EG)
- 256 KB Flash vs 128 KB on F92 (vsEZ80F92AZ050EG)
- Lead-free RoHS-compliant option available (vsEZ80F91AZ050EG)
Catatan Desain
Decouple each VDD/VSS pair with a 100 nF ceramic capacitor placed within 5 mm of the package pin, plus a 10 uF bulk capacitor near the IC. The eZ80F91AZ050SG core draws transient current during EMAC packet transmission, and insufficient decoupling can cause brown-out resets. Per Zilog PS0192 design guidance, place a ferrite bead between the analog and digital supplies if the EMAC MII lines run near sensitive analog traces.
Route the EMAC MII traces (TXCLK, TXEN, TXD_0..3, RXCLK, RXDV, RXD_0..3, CRS, COL, MDC, MDIO) with matched 50 ohm controlled impedance and length matching within 25 mil. The MII bus runs at 25 MHz, so keep traces on a single inner layer with continuous ground plane beneath. Place the external PHY (e.g. DP83848) within 50 mm of the eZ80F91 to meet MII timing budgets per IEEE 802.3.
Do not exceed 3.6 V on any VDD rail or the on-chip regulator will be destroyed. The XTAL1/XTAL2 pins require a fundamental-mode crystal with load capacitors matched to the crystal specification (typically 18-22 pF). Driving RESET low for less than the minimum 4 clock cycles will not fully reset the eZ80 core; follow PS0192 reset timing. When migrating from Z80 mode to 24-bit ADL mode, ensure interrupt vectors are remapped or unexpected behaviour will occur.
At 50 MHz clock the eZ80F91AZ050SG core power dissipation is approximately 0.5 W typical. The 144-LQFP (20x20 mm) package provides adequate thermal dissipation with a minimum 4-layer PCB copper pour of at least 1 square inch under the exposed pad area. For industrial temperature operation, derate clock speed to 40 MHz above 85 C ambient to keep junction temperature within the 125 C limit.
Informasi Konformitas
Standard (SG) finish is original terminal finish; lead-free EG variant is required for RoHS compliance. AEC-Q100 not applicable for industrial networking MCUs.
