Lattice Semiconductor

LC4064C-25T48C - 64-Macrocell 2.5 ns CPLD | Lattice Semiconductor

MPN: LC4064C-25T48C ✗ Akhir Hidup
3.3 V, 2.5 V, 1.8 V Vdss 48-TQFP, 7 x 7 mm Package -25 Speed Nonvolatile Memory
MOQ: 1 |

LC4064C-25T48C Ringkasan

The Lattice Semiconductor LC4064C-25T48C is an ispMACH 4000C complex programmable logic device with 64 macrocells, a 2.5 ns typical propagation delay, 32 user I/O pins, and a 48-pin TQFP package. It belongs to the SuperFAST high-density PLD family and supports 3.3 V, 2.5 V, and 1.8 V in-system-programmable devices.

A complex programmable logic device, or CPLD, is a user-programmable semiconductor that combines nonvolatile configuration memory, programmable logic, and I/O structures. In the broader hierarchy, the LC4064C is a CPLD, a programmable logic device, and a semiconductor. Its nonvolatile configuration allows the implemented control, interface, or glue logic to remain in the circuit without continuous configuration from an external processor after power-up.

The LC4064C-25T48C provides 64 macrocells and 32 user I/O pins in a 7 x 7 mm surface-mount package. Its 2.5 ns speed designation is intended for designs requiring faster logic propagation than slower grades in the same device family. In-system programmability also permits configuration updates through the device programming interface, which is useful during manufacturing, prototyping, and field-update workflows.

The part is identified by the LC4064C series, a -25 speed grade, and a T48 package code. The listed operating supply options include 3.3 V, 2.5 V, and 1.8 V, while the core supply range is identified as 1.65 V to 1.95 V. These options make the device relevant to mixed-voltage systems in which control logic interfaces with modern low-voltage digital rails.

Typical uses include peripheral-interface bridging, bus decoding, industrial control logic, instrumentation, embedded system glue logic, and compact communication-equipment control blocks. The 32 user I/O pins can support interfaces that do not require the larger pin count of an FPGA, while the 64 macrocells provide substantially more logic capacity than small generic array logic devices.

Designers should verify the exact I/O voltage, timing, pinout, and power requirements against the manufacturer datasheet before layout. Because a 48-pin TQFP has closely spaced leads, PCB routing should preserve adequate clearances and provide a continuous ground plane. Programming signals and configuration pins must also follow the manufacturer's recommended interface and termination guidance.

This page organizes the device's programmable-logic characteristics, pin-compatible alternatives, application guidance, and engineering trade-offs into a practical selection reference. It also distinguishes the -25 speed grade from related device variants so engineers can assess lifecycle, timing, package, and replacement implications before committing a design.

Alternatif penggantian untuk LC4064C-25T48C — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.

Variasi di dalam seri ini

Model-series yang sama yang kompatibel dengan penggantian LC4064C-25T48C (sama faktor bentuk dan footprint) — berbeda di dalam Package, Device Type, Lead-Free Status, Core Supply Voltage, Logic Capacity.

Lattice Semiconductor
Package: 48-pin TQFP
Bandingkan dengan LC4064C-25T48C →
Lattice Semiconductor
Package: 48-pin TQFP, 7 mm x 7 mm
Device Type: ispMACH 4000V complex programmable logic device
Bandingkan dengan LC4064C-25T48C →
AMD
Package: 48-pin QFN with exposed pad, 7 x 7 mm
Device Type: CoolRunner-II complex programmable logic device
Lead-Free Status: Lead free
Bandingkan dengan LC4064C-25T48C →
AMD
Package: 48-pin QFN with exposed pad, 7 mm × 7 mm
Device Type: CoolRunner-II CPLD
Lead-Free Status: Lead free
Bandingkan dengan LC4064C-25T48C →

LC4064C-25TN48C

✅ Drop-In
📦 48-TQFP (7 x 7 mm)
Retains 64 macrocells, 32 user I/O pins, the -25 speed designation, and the 48-TQFP arrangement; exact temperature and ordering-code differences require confirmation.

📋 Alternatif referensi (tidak dalam katalog)

LC4064B-25T48C

✅ Drop-In
Lattice Semiconductor
📦 48-TQFP (7 x 7 mm)
Complex programmable logic device (CPLD) · ispMACH 4000B · 64 macrocells · 4 logic blocks · 32 user I/O pins · 2.5 ns · 3.3 V, 2.5 V, and 1.8 V · In-system programmable

Kontak untuk harga

Lihat Datasheet →

LC4064V-25T48C

✅ Drop-In
Lattice Semiconductor
📦 48-TQFP (7 x 7 mm)
ispMACH 4000V complex programmable logic device · 64 macrocells · 4 logic blocks · 32 pins · 2.5 ns · 400 MHz · 3.0 V to 3.6 V · 3.3 V, 2.5 V, and 1.8 V

Kontak untuk harga

Lihat Datasheet →

XC2C64A-5QFG48C

✅ Drop-In
AMD
📦 QFG-48 (7 x 7 mm)
CoolRunner-II complex programmable logic device · In-system programmable · 64 macrocells · 37 I/O · Approximately 1.5K logic gates · 263 MHz · Up to 4.6 ns · 1.8 V

Kontak untuk harga

Lihat Datasheet →

XC2C64A-7QFG48C

✅ Drop-In
AMD
📦 QFG-48 (7 x 7 mm)
In-System Programmable · CoolRunner-II CPLD · 64 macrocells · Approximately 1.5K gates · 159 MHz · 4.6 ns · 37 I/O · 1.8 V

Kontak untuk harga

Lihat Datasheet →

LC4064C-25T48C Rating Maksimal & Karakteristik Listrik

Device Type Complex Programmable Logic Device (CPLD)
Product Family ispMACH 4000C SuperFAST High Density PLD
Macrocell Count 64 macrocells
User I/O Count 32 I/O pins
Typical Propagation Delay 2.5 ns
Speed Grade -25
Paket 48-TQFP, 7 x 7 mm
Tipe Mounting Surface mount
Configuration Type In-system programmable
Configuration Memory Nonvolatile
Supported I/O Supply Options 3.3 V, 2.5 V, 1.8 V
Core Supply Voltage 1.65 V to 1.95 V
Logic Capacity 64 macrocells
Package Pin Count 48 pins
RoHS Compliance unknown
REACH Compliance unknown
AEC-Q100 Qualification unknown
Lead-Free Status unknown
Halogen-Free Status unknown

LC4064C-25T48C 48 pins Diamant Konfigurasi Panduan

Konfigurasi pin untuk LC4064C-25T48C (48 pins pakai pakai). IC digital ini termasuk GPIO, antarmuka komunikasi (UART, SPI, I2C), dan pin kuasa. Lihat datasheet produsen untuk fungsi pin alternatif dan opsi konfigurasi. Penting untuk desain sistem pengemasan dan PCB.

Diamant diagram pakai pakai 48 pins untuk LC4064C-25T48C

Tidak ada data diatribut pin yang tersedia untuk LC4064C-25T48C.

Lihat ke: datasheet produk untuk konfigurasi pin penuh.

Aplikasi Umum

LC4064C-25T48C cocok untuk 6 aplikasis: Industrial Peripheral Interface Bridging, Compact Communication Equipment Control, Data Acquisition and Instrumentation Control, Embedded System Glue Logic, LED and Display Sequencing Control, Legacy Security and Surveillance Control.

🏭

Industrial Peripheral Interface Bridging

The LC4064C-25T48C fits peripheral-interface bridging because its 64 macrocells can implement multiple state machines, address decoders, and control paths while 32 user I/O pins connect two digital domains. The 2.5 ns typical propagation delay provides additional timing margin for synchronous control logic. In an industrial controller, the CPLD can translate legacy bus signals, qualify asynchronous inputs, and sequence device enables. Because the device is obsolete, retain its pin mapping and programming setup for maintenance, and verify the operating-temperature grade and isolation requirements of the complete equipment before deployment.

🌐

Compact Communication Equipment Control

The LC4064C-25T48C can implement protocol framing, command decoding, and flow-control state machines in communication equipment where a small FPGA would be unnecessary. Its 64 macrocells provide enough logic for multiple coordinated channels, while the 32 user I/O pins support data, status, and configuration connections. The 2.5 ns typical propagation delay is useful for registered datapaths that must operate close to modern system clocks. The obsolete lifecycle status makes this primarily a legacy-maintenance choice; validate signal integrity, supply levels, and programming-file compatibility before adapting it to a new design.

🖥️

Data Acquisition and Instrumentation Control

For data-acquisition equipment, the LC4064C-25T48C can coordinate sample sequencing, trigger routing, status flags, and front-panel control signals. The 64 macrocells allow several acquisition channels and support functions to be consolidated into one programmable-logic device, while 32 user I/O pins can connect counters, sensors, and interface transceivers. A 2.5 ns typical propagation delay can assist with tightly registered timing paths. Because precision analog performance depends on the surrounding circuitry, use the CPLD for control rather than signal conditioning, and verify its exact temperature grade and supply arrangement in instrumentation equipment.

🔧

Embedded System Glue Logic

The LC4064C-25T48C is suitable for implementing glue logic between a processor, memory, and discrete peripherals. Its 64 macrocells can handle bus arbitration, chip-select generation, interrupt routing, and programmable delay or edge-detection functions, while 32 user I/O pins provide practical connectivity for a compact controller. The 2.5 ns typical propagation delay helps minimize uncertainty in synchronous interface paths. For new embedded platforms, first evaluate whether a current microcontroller or CPLD offers better lifecycle assurance; for repairs, preserve the original configuration and confirm that pin multiplexing and programming-tool support remain available.

💡

LED and Display Sequencing Control

The LC4064C-25T48C can generate display scan sequencing, key-matrix scanning, indicator timing, and alarm-control logic in LED-oriented systems. Its 64 macrocells support multiple counter and decode functions, and the 32 user I/O pins can drive multiplexed display and front-panel signals. The 2.5 ns typical propagation delay offers more margin than slower CPLD grades for registered display timing. The device does not generate regulated display power or drive high-current LEDs directly, so external buffers and appropriate logic-level voltage compatibility are required. Its obsolete status also makes active-platform evaluation preferable for new display products.

🎥

Legacy Security and Surveillance Control

The LC4064C-25T48C can implement timing, event sequencing, and interface logic for legacy security and surveillance equipment. Its 64 macrocells allow multiple alarm zones, trigger conditions, and recorder-control paths to be combined, while 32 user I/O pins support sensors and status signals. The 2.5 ns typical propagation delay supports registered event logic rather than long combinational chains. Because the device is obsolete, use it only where the existing PCB, programming file, and tested system behavior justify retention. Confirm supply tolerances, temperature limits, and any regulatory requirements for the finished surveillance product.

What is the LC4064C-25T48C?
The LC4064C-25T48C is a 64-macrocell CPLD from Lattice Semiconductor with a 2.5 ns typical propagation delay and 32 user I/O pins. According to the manufacturer datasheet, it is an ispMACH 4000C SuperFAST high-density programmable logic device offered in a 48-pin TQFP package. The device combines programmable logic with in-system programming and nonvolatile configuration storage.
How many macrocells and user I/O pins does LC4064C-25T48C have?
The LC4064C-25T48C provides 64 macrocells and 32 user I/O pins. These figures place it in the high-density CPLD category and make it suitable for control logic, bus decoding, interface bridging, and other designs requiring more logic than a small GAL or generic array logic device. The manufacturer product information identifies the same 64-macrocell, 32-I/O configuration.
What is the propagation delay of LC4064C-25T48C?
The LC4064C-25T48C has a 2.5 ns typical propagation delay. This speed designation distinguishes the -25 grade from slower members of the LC4064C family. According to the manufacturer datasheet, engineers should also evaluate setup, hold, clock, and I/O timing requirements for the specific paths in a design rather than relying on propagation delay alone.
Which package does LC4064C-25T48C use?
The LC4064C-25T48C uses a 48-pin TQFP package measuring 7 x 7 mm. The T48 portion of the part number identifies the package configuration, while the C suffix identifies the applicable device variant. Before substituting a component, verify the physical lead pattern, exposed thermal features, pin assignments, and PCB land pattern in the manufacturer pin description.
Where can I download the LC4064C-25T48C datasheet PDF?
The LC4064C-25T48C datasheet is available from the Lattice document link listed on this page and through the manufacturer data-book entry. The document is titled for 3.3 V, 2.5 V, and 1.8 V in-system-programmable SuperFAST high-density PLDs. Use the manufacturer's pin-description and timing tables when assigning PCB signals and evaluating timing closure.
Where can I find the LC4064C-25T48C pinout?
The LC4064C-25T48C pinout is defined by the pin-description table in the Lattice ispMACH 4000 family datasheet. The 48-pin TQFP arrangement must be followed exactly when assigning configuration, clock, power, ground, and user I/O functions. Use the package drawing together with the pin table to avoid relying on visual or third-party board-layout assumptions.
What can replace the LC4064C-25T48C?
Pin-compatible replacement candidates include LC4064C-25TN48C and LC4064B-25T48C, while related LC4064V and XC2C64A devices require closer device-specific validation. According to the manufacturer and cross-reference documentation, LC4064C-25TN48C appears as a related alternative. Confirm configuration compatibility, timing, supply voltage, pin names, and lifecycle requirements before treating any candidate as a drop-in replacement.
What is the best Lattice Semiconductor equivalent for LC4064C-25T48C?
LC4064C-25TN48C is the closest same-manufacturer candidate because it retains the LC4064C family identity, 48-pin package arrangement, and -25 speed designation. LC4064B-25T48C is another same-package family alternative, while LC4064V-25T48C may differ in device generation. According to the manufacturer datasheet and cross-reference records, programming-file and electrical compatibility still require confirmation.
Is the XC2C64A-7QFG48C a drop-in replacement for LC4064C-25T48C?
The XC2C64A-7QFG48C is a related 64-macrocell CPLD listed in cross-reference material, but it is not automatically interchangeable with the LC4064C-25T48C. The -7 speed grade differs from the target's -25 grade, and configuration architecture, programming file, voltage, timing, and pin naming must be checked. A schematic and PCB review is required before using it as a production replacement.
LC4064C-25T48C vs LC4064C-75T48C: which should I choose?
Choose LC4064C-25T48C when the design needs the faster -25 speed grade and approximately 2.5 ns typical propagation delay; choose LC4064C-75T48C when the slower -75 timing is acceptable. Both are identified as SuperFAST high-density CPLDs, but the 50 ns difference between the speed-grade numbers makes timing—not simply the family name—the decisive selection factor.
When should I choose LC4064C-25T48C over a slower LC4064C grade?
Choose LC4064C-25T48C when timing paths cannot meet their setup and hold requirements with a slower grade. Its 2.5 ns typical propagation delay provides substantially more timing margin than the 7.5 ns-class -75 option. The trade-off is that timing adequacy must be demonstrated with the actual logic configuration, I/O loading, operating conditions, and the complete manufacturer timing model.
Is LC4064C-25T48C suitable for industrial control and interface bridging?
The LC4064C-25T48C is suitable for compact control, decoding, and interface-bridging functions when its 64 macrocells and 32 user I/O pins match the design. Its 2.5 ns typical propagation delay supports higher-speed logic paths. For industrial deployment, verify the exact operating-temperature grade, isolation requirements, reliability targets, and availability of an active lifecycle path.
How do I design the PCB around LC4064C-25T48C?
Use the manufacturer package drawing and pin table to create the 48-pin TQFP land pattern, then maintain a continuous ground plane beneath and around the device. Route configuration and clock signals away from noisy switching nodes, use short return paths for supply connections, and follow the datasheet's decoupling and programming-interface guidance. Because this device is obsolete, preserve footprint, pin, voltage, and timing documentation for future sourcing and redesign.
Can LC4064C-25T48C operate from 1.8 V, 2.5 V, and 3.3 V?
The LC4064C-25T48C family documentation identifies 3.3 V, 2.5 V, and 1.8 V in-system-programmable device variants, while the product information identifies a 1.65 V to 1.95 V internal core supply range. The exact ordering code determines which external supply arrangement applies, so consult the ordering guide and datasheet before connecting the power pins or selecting level-shifting components.
Is LC4064C-25T48C currently active?
The LC4064C has been discontinued by its manufacturer, and the LC4064C-25T48C should therefore be treated as an obsolete legacy device. Lattice was not identified as offering a current replacement with the same logic footprint in the cited replacement listing. New designs should evaluate an active programmable-logic platform, while legacy maintenance should verify exact source, condition, and configuration compatibility.

Data referensi engineering untuk LC4064C-25T48C — pembandingan, panduan desain, dan informasi konformitas.

Panduan Pemilihan

Choose the LC4064C-25T48C for legacy maintenance when the existing system specifically depends on its 64 macrocells, 32 user I/O pins, 2.5 ns typical propagation delay, configuration file, and 48-pin TQFP footprint. LC4064C-25TN48C is the first same-family candidate to investigate because it preserves the -25 timing class and package format. Consider LC4064B-25T48C when the required configuration can be mapped to the B-generation architecture. LC4064V-25T48C may suit a related legacy design, but voltage and feature differences require review. XC2C64A-5QFG48C and XC2C64A-7QFG48C are cross-reference candidates rather than automatic replacements; their -5 and -7 timing classes differ from the target. For new production, prefer a currently supported programmable-logic platform unless preserving the existing board and programming artifacts is essential.

Pembandingan dengan Alternatif

Parameter Umum Produk Ini LC4064C-25TN48C LC4064B-25T48C LC4064V-25T48C XC2C64A-5QFG48C XC2C64A-7QFG48C
Brand Lattice Semiconductor Lattice Semiconductor Lattice Semiconductor Lattice Semiconductor Lattice Semiconductor Lattice Semiconductor
Package 48-TQFP (7 x 7 mm) 48-TQFP (7 x 7 mm) 48-TQFP (7 x 7 mm) 48-TQFP (7 x 7 mm) QFG-48 (7 x 7 mm) QFG-48 (7 x 7 mm)
Device Type CPLD CPLD CPLD CPLD CPLD CPLD
Macrocell Count 64 macrocells 64 macrocells 64 macrocells 64 macrocells 64 macrocells 64 macrocells
User I/O Count 32 I/O pins 32 I/O pins 32 I/O pins 32 I/O pins 32 I/O pins 32 I/O pins
Target Typical Propagation Delay 2.5 ns 2.5 ns 2.5 ns 2.5 ns 5 ns class 7 ns class
In-System Programming Yes Yes Yes Yes Yes Yes
Lifecycle Status Obsolete Obsolete Obsolete Obsolete Obsolete Obsolete

Diferensiator Kunci

  • Faster -25 speed grade within the LC4064C family (vsLC4064C-75T48C)
  • Direct 64-macrocell cross-reference candidate (vsXC2C64A-5QFG48C)
  • Same-package selection within the original manufacturer portfolio (vsLC4064B-25T48C)

Catatan Desain

Create the 48-pin TQFP footprint from the manufacturer package drawing rather than inferring it from the generic T48 code. Confirm pin-1 orientation, lead width, pitch, courtyard, solder-mask relief, and paste geometry against the selected assembly process. Preserve the original land pattern when maintaining an obsolete board because changing package geometry or paste apertures can create solder bridges across the 0.5 mm-class lead pitch.

Separate the device's core and I/O supply requirements in the schematic and follow the datasheet's decoupling recommendations. The listed core supply range of 1.65 V to 1.95 V and the family's 1.8 V, 2.5 V, and 3.3 V options must not be treated as interchangeable. Check every power pin against the exact ordering code and verify that external interface levels cannot exceed the device's allowed voltage range.

Keep the configuration interface and clock paths away from switching-regulator outputs and high-current return paths. Provide a continuous ground reference under the device, place bypass capacitors close to their assigned pins, and avoid routing sensitive inputs alongside programming signals. These measures reduce simultaneous-switching noise and ground bounce, both of which can create false transitions or unstable configuration behavior in an older CPLD design.

Do not select a related LC4064 or XC2C64A part solely from macrocell count and package size. Compare configuration architecture, programming file compatibility, pin multiplexing, I/O standards, supply voltages, timing constraints, and the meaning of each speed grade. The -25 and -7 designations represent materially different timing classes, and obsolete-device sourcing requires documented part provenance and condition verification.

Informasi Konformitas

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Bebas Logam Lengket
Unknown
Bebas Halogena
Unknown
Mineral Konflik
Unknown

No explicit environmental or automotive compliance declaration was identified for this exact ordering code. Confirm the original manufacturer documentation and applicable product requirements before use.

Data disahkan pada: 2026-11-14 — data disahkan dan disusun oleh tim engineering komponen XAIPART

Pencarian Terkait

LC4064C-25T48C datasheet LC4064C-25T48C pinout LC4064C-25T48C datasheet pdf LC4064C-25T48C equivalent LC4064C-25T48C replacement LC4064C-25T48C cross reference LC4064C-25T48C vs LC4064C-75T48C LC4064C-25T48C footprint Lattice LC4064C-25T48C LC4064C-25T48C 2.5 ns CPLD LC4064C-25T48C 64 macrocell LC4064C-25T48C 48 TQFP LC4064C-25T48C price LC4064C-25T48C stock LC4064C-25T48C obsolete replacement

Komponen dan Istilah Terkait

Lattice Semiconductor LC4064C-25T48C LC4064C-25TN48C LC4064B-25T48C LC4064V-25T48C XC2C64A-5QFG48C XC2C64A-7QFG48C CPLD complex programmable logic device ispMACH 4000C programmable logic device semiconductor SuperFAST high-density PLD in-system programming nonvolatile configuration memory macrocell TQFP-48 QFN family surface mount SMD propagation delay user I/O industrial control interface bridging
Kutipan Cepat RFQ
Isi detail lengkap — tim penjualan kami akan membalas dalam 24 jam
Nomor Part Manufaktur Paket QTY Harga Target Lengkap
✓
Kutipan telah disubmit!

Kami akan membalas email Anda dalam 24 jam

1
RFQ Dikirim
2
Kutipan Diterima
3
Order Ditempatkan
4
Pembayaran
5
Dikirim
6
Dikirim
Lihat Detil RFQ