LC4064C-25T48C - 64-Macrocell 2.5 ns CPLD | Lattice Semiconductor
MPN: LC4064C-25T48C ✗ Cuối đờiLC4064C-25T48C Tóm tắt
A complex programmable logic device, or CPLD, is a user-programmable semiconductor that combines nonvolatile configuration memory, programmable logic, and I/O structures. In the broader hierarchy, the LC4064C is a CPLD, a programmable logic device, and a semiconductor. Its nonvolatile configuration allows the implemented control, interface, or glue logic to remain in the circuit without continuous configuration from an external processor after power-up.
The LC4064C-25T48C provides 64 macrocells and 32 user I/O pins in a 7 x 7 mm surface-mount package. Its 2.5 ns speed designation is intended for designs requiring faster logic propagation than slower grades in the same device family. In-system programmability also permits configuration updates through the device programming interface, which is useful during manufacturing, prototyping, and field-update workflows.
The part is identified by the LC4064C series, a -25 speed grade, and a T48 package code. The listed operating supply options include 3.3 V, 2.5 V, and 1.8 V, while the core supply range is identified as 1.65 V to 1.95 V. These options make the device relevant to mixed-voltage systems in which control logic interfaces with modern low-voltage digital rails.
Typical uses include peripheral-interface bridging, bus decoding, industrial control logic, instrumentation, embedded system glue logic, and compact communication-equipment control blocks. The 32 user I/O pins can support interfaces that do not require the larger pin count of an FPGA, while the 64 macrocells provide substantially more logic capacity than small generic array logic devices.
Designers should verify the exact I/O voltage, timing, pinout, and power requirements against the manufacturer datasheet before layout. Because a 48-pin TQFP has closely spaced leads, PCB routing should preserve adequate clearances and provide a continuous ground plane. Programming signals and configuration pins must also follow the manufacturer's recommended interface and termination guidance.
This page organizes the device's programmable-logic characteristics, pin-compatible alternatives, application guidance, and engineering trade-offs into a practical selection reference. It also distinguishes the -25 speed grade from related device variants so engineers can assess lifecycle, timing, package, and replacement implications before committing a design.
Bộ thay thế dễ dàng lắp đặt cho LC4064C-25T48C — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với LC4064C-25T48C (cùng hình factor và footprint) — khác nhau ở Package, Device Type, Lead-Free Status, Core Supply Voltage, Logic Capacity.
LC4064C-25TN48C
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
LC4064B-25T48C
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →LC4064V-25T48C
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →XC2C64A-5QFG48C
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →XC2C64A-7QFG48C
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →LC4064C-25T48C Tỷ lệ tối đa & tính chất điện
| Device Type | Complex Programmable Logic Device (CPLD) |
| Product Family | ispMACH 4000C SuperFAST High Density PLD |
| Macrocell Count | 64 macrocells |
| User I/O Count | 32 I/O pins |
| Typical Propagation Delay | 2.5 ns |
| Speed Grade | -25 |
| Hộp | 48-TQFP, 7 x 7 mm |
| Kiểu lắp đặt | Surface mount |
| Configuration Type | In-system programmable |
| Configuration Memory | Nonvolatile |
| Supported I/O Supply Options | 3.3 V, 2.5 V, 1.8 V |
| Core Supply Voltage | 1.65 V to 1.95 V |
| Logic Capacity | 64 macrocells |
| Package Pin Count | 48 pins |
| RoHS Compliance | unknown |
| REACH Compliance | unknown |
| AEC-Q100 Qualification | unknown |
| Lead-Free Status | unknown |
| Halogen-Free Status | unknown |
Hướng dẫn cấu hình chân LC4064C-25T48C 48 pins
Cấu hình chân cho LC4064C-25T48C (48 pins gói). IC số này bao gồm chân GPIO, giao diện truyền thông (UART, SPI, I2C) và chân nguồn. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết các chức năng chân thay thế và tùy chọn cấu hình. Cực kỳ quan trọng cho thiết kế hệ thống tích hợp và lập trình PCB.
Không có dữ liệu chân cụ thể sẵn có cho LC4064C-25T48C.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
LC4064C-25T48C phù hợp cho 6 Áp dụngs: Industrial Peripheral Interface Bridging, Compact Communication Equipment Control, Data Acquisition and Instrumentation Control, Embedded System Glue Logic, LED and Display Sequencing Control, Legacy Security and Surveillance Control.
Industrial Peripheral Interface Bridging
The LC4064C-25T48C fits peripheral-interface bridging because its 64 macrocells can implement multiple state machines, address decoders, and control paths while 32 user I/O pins connect two digital domains. The 2.5 ns typical propagation delay provides additional timing margin for synchronous control logic. In an industrial controller, the CPLD can translate legacy bus signals, qualify asynchronous inputs, and sequence device enables. Because the device is obsolete, retain its pin mapping and programming setup for maintenance, and verify the operating-temperature grade and isolation requirements of the complete equipment before deployment.
Được đề xuất
Compact Communication Equipment Control
The LC4064C-25T48C can implement protocol framing, command decoding, and flow-control state machines in communication equipment where a small FPGA would be unnecessary. Its 64 macrocells provide enough logic for multiple coordinated channels, while the 32 user I/O pins support data, status, and configuration connections. The 2.5 ns typical propagation delay is useful for registered datapaths that must operate close to modern system clocks. The obsolete lifecycle status makes this primarily a legacy-maintenance choice; validate signal integrity, supply levels, and programming-file compatibility before adapting it to a new design.
Được đề xuất
Data Acquisition and Instrumentation Control
For data-acquisition equipment, the LC4064C-25T48C can coordinate sample sequencing, trigger routing, status flags, and front-panel control signals. The 64 macrocells allow several acquisition channels and support functions to be consolidated into one programmable-logic device, while 32 user I/O pins can connect counters, sensors, and interface transceivers. A 2.5 ns typical propagation delay can assist with tightly registered timing paths. Because precision analog performance depends on the surrounding circuitry, use the CPLD for control rather than signal conditioning, and verify its exact temperature grade and supply arrangement in instrumentation equipment.
Được đề xuất
Embedded System Glue Logic
The LC4064C-25T48C is suitable for implementing glue logic between a processor, memory, and discrete peripherals. Its 64 macrocells can handle bus arbitration, chip-select generation, interrupt routing, and programmable delay or edge-detection functions, while 32 user I/O pins provide practical connectivity for a compact controller. The 2.5 ns typical propagation delay helps minimize uncertainty in synchronous interface paths. For new embedded platforms, first evaluate whether a current microcontroller or CPLD offers better lifecycle assurance; for repairs, preserve the original configuration and confirm that pin multiplexing and programming-tool support remain available.
Được đề xuất
LED and Display Sequencing Control
The LC4064C-25T48C can generate display scan sequencing, key-matrix scanning, indicator timing, and alarm-control logic in LED-oriented systems. Its 64 macrocells support multiple counter and decode functions, and the 32 user I/O pins can drive multiplexed display and front-panel signals. The 2.5 ns typical propagation delay offers more margin than slower CPLD grades for registered display timing. The device does not generate regulated display power or drive high-current LEDs directly, so external buffers and appropriate logic-level voltage compatibility are required. Its obsolete status also makes active-platform evaluation preferable for new display products.
Được đề xuất
Legacy Security and Surveillance Control
The LC4064C-25T48C can implement timing, event sequencing, and interface logic for legacy security and surveillance equipment. Its 64 macrocells allow multiple alarm zones, trigger conditions, and recorder-control paths to be combined, while 32 user I/O pins support sensors and status signals. The 2.5 ns typical propagation delay supports registered event logic rather than long combinational chains. Because the device is obsolete, use it only where the existing PCB, programming file, and tested system behavior justify retention. Confirm supply tolerances, temperature limits, and any regulatory requirements for the finished surveillance product.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho LC4064C-25T48C — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | LC4064C-25TN48C | LC4064B-25T48C | LC4064V-25T48C | XC2C64A-5QFG48C | XC2C64A-7QFG48C |
|---|---|---|---|---|---|---|
| Brand | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor |
| Package | 48-TQFP (7 x 7 mm) | 48-TQFP (7 x 7 mm) | 48-TQFP (7 x 7 mm) | 48-TQFP (7 x 7 mm) | QFG-48 (7 x 7 mm) | QFG-48 (7 x 7 mm) |
| Device Type | CPLD | CPLD | CPLD | CPLD | CPLD | CPLD |
| Macrocell Count | 64 macrocells | 64 macrocells | 64 macrocells | 64 macrocells | 64 macrocells | 64 macrocells |
| User I/O Count | 32 I/O pins | 32 I/O pins | 32 I/O pins | 32 I/O pins | 32 I/O pins | 32 I/O pins |
| Target Typical Propagation Delay | 2.5 ns | 2.5 ns | 2.5 ns | 2.5 ns | 5 ns class | 7 ns class |
| In-System Programming | Yes | Yes | Yes | Yes | Yes | Yes |
| Lifecycle Status | Obsolete | Obsolete | Obsolete | Obsolete | Obsolete | Obsolete |
Bảo phân biệt quan trọng
- Faster -25 speed grade within the LC4064C family (vsLC4064C-75T48C)
- Direct 64-macrocell cross-reference candidate (vsXC2C64A-5QFG48C)
- Same-package selection within the original manufacturer portfolio (vsLC4064B-25T48C)
Ghi chú thiết kế
Create the 48-pin TQFP footprint from the manufacturer package drawing rather than inferring it from the generic T48 code. Confirm pin-1 orientation, lead width, pitch, courtyard, solder-mask relief, and paste geometry against the selected assembly process. Preserve the original land pattern when maintaining an obsolete board because changing package geometry or paste apertures can create solder bridges across the 0.5 mm-class lead pitch.
Separate the device's core and I/O supply requirements in the schematic and follow the datasheet's decoupling recommendations. The listed core supply range of 1.65 V to 1.95 V and the family's 1.8 V, 2.5 V, and 3.3 V options must not be treated as interchangeable. Check every power pin against the exact ordering code and verify that external interface levels cannot exceed the device's allowed voltage range.
Keep the configuration interface and clock paths away from switching-regulator outputs and high-current return paths. Provide a continuous ground reference under the device, place bypass capacitors close to their assigned pins, and avoid routing sensitive inputs alongside programming signals. These measures reduce simultaneous-switching noise and ground bounce, both of which can create false transitions or unstable configuration behavior in an older CPLD design.
Do not select a related LC4064 or XC2C64A part solely from macrocell count and package size. Compare configuration architecture, programming file compatibility, pin multiplexing, I/O standards, supply voltages, timing constraints, and the meaning of each speed grade. The -25 and -7 designations represent materially different timing classes, and obsolete-device sourcing requires documented part provenance and condition verification.
Thông tin tuân thủ
No explicit environmental or automotive compliance declaration was identified for this exact ordering code. Confirm the original manufacturer documentation and applicable product requirements before use.