LC4064C-25T48C - 64-Macrocell 2.5 ns CPLD | Lattice Semiconductor
部品番号: LC4064C-25T48C ✗ 生産終了LC4064C-25T48C 概要
A complex programmable logic device, or CPLD, is a user-programmable semiconductor that combines nonvolatile configuration memory, programmable logic, and I/O structures. In the broader hierarchy, the LC4064C is a CPLD, a programmable logic device, and a semiconductor. Its nonvolatile configuration allows the implemented control, interface, or glue logic to remain in the circuit without continuous configuration from an external processor after power-up.
The LC4064C-25T48C provides 64 macrocells and 32 user I/O pins in a 7 x 7 mm surface-mount package. Its 2.5 ns speed designation is intended for designs requiring faster logic propagation than slower grades in the same device family. In-system programmability also permits configuration updates through the device programming interface, which is useful during manufacturing, prototyping, and field-update workflows.
The part is identified by the LC4064C series, a -25 speed grade, and a T48 package code. The listed operating supply options include 3.3 V, 2.5 V, and 1.8 V, while the core supply range is identified as 1.65 V to 1.95 V. These options make the device relevant to mixed-voltage systems in which control logic interfaces with modern low-voltage digital rails.
Typical uses include peripheral-interface bridging, bus decoding, industrial control logic, instrumentation, embedded system glue logic, and compact communication-equipment control blocks. The 32 user I/O pins can support interfaces that do not require the larger pin count of an FPGA, while the 64 macrocells provide substantially more logic capacity than small generic array logic devices.
Designers should verify the exact I/O voltage, timing, pinout, and power requirements against the manufacturer datasheet before layout. Because a 48-pin TQFP has closely spaced leads, PCB routing should preserve adequate clearances and provide a continuous ground plane. Programming signals and configuration pins must also follow the manufacturer's recommended interface and termination guidance.
This page organizes the device's programmable-logic characteristics, pin-compatible alternatives, application guidance, and engineering trade-offs into a practical selection reference. It also distinguishes the -25 speed grade from related device variants so engineers can assess lifecycle, timing, package, and replacement implications before committing a design.
ドロップイン代替品: LC4064C-25T48C — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: LC4064C-25T48C (同一形状・フットプリント) — 相違点: Package, Device Type, Lead-Free Status, Core Supply Voltage, Logic Capacity.
LC4064C-25TN48C
✅ ドロップイン📋 参考代替品(カタログ未掲載)
LC4064B-25T48C
✅ ドロップイン価格はお問い合わせください
データシートを見る →LC4064V-25T48C
✅ ドロップイン価格はお問い合わせください
データシートを見る →XC2C64A-5QFG48C
✅ ドロップイン価格はお問い合わせください
データシートを見る →XC2C64A-7QFG48C
✅ ドロップイン価格はお問い合わせください
データシートを見る →LC4064C-25T48C 最大定格&電気的特性
| Device Type | Complex Programmable Logic Device (CPLD) |
| Product Family | ispMACH 4000C SuperFAST High Density PLD |
| Macrocell Count | 64 macrocells |
| User I/O Count | 32 I/O pins |
| Typical Propagation Delay | 2.5 ns |
| Speed Grade | -25 |
| パッケージ | 48-TQFP, 7 x 7 mm |
| 実装タイプ | Surface mount |
| Configuration Type | In-system programmable |
| Configuration Memory | Nonvolatile |
| Supported I/O Supply Options | 3.3 V, 2.5 V, 1.8 V |
| Core Supply Voltage | 1.65 V to 1.95 V |
| Logic Capacity | 64 macrocells |
| Package Pin Count | 48 pins |
| RoHS Compliance | unknown |
| REACH Compliance | unknown |
| AEC-Q100 Qualification | unknown |
| Lead-Free Status | unknown |
| Halogen-Free Status | unknown |
LC4064C-25T48C 48 pins ピン配置ガイド
LC4064C-25T48C (48 pins パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: LC4064C-25T48C.
詳細は データシート をご参照ください。
主な用途
LC4064C-25T48C の用途: 6 件s: Industrial Peripheral Interface Bridging, Compact Communication Equipment Control, Data Acquisition and Instrumentation Control, Embedded System Glue Logic, LED and Display Sequencing Control, Legacy Security and Surveillance Control.
Industrial Peripheral Interface Bridging
The LC4064C-25T48C fits peripheral-interface bridging because its 64 macrocells can implement multiple state machines, address decoders, and control paths while 32 user I/O pins connect two digital domains. The 2.5 ns typical propagation delay provides additional timing margin for synchronous control logic. In an industrial controller, the CPLD can translate legacy bus signals, qualify asynchronous inputs, and sequence device enables. Because the device is obsolete, retain its pin mapping and programming setup for maintenance, and verify the operating-temperature grade and isolation requirements of the complete equipment before deployment.
おすすめ
Compact Communication Equipment Control
The LC4064C-25T48C can implement protocol framing, command decoding, and flow-control state machines in communication equipment where a small FPGA would be unnecessary. Its 64 macrocells provide enough logic for multiple coordinated channels, while the 32 user I/O pins support data, status, and configuration connections. The 2.5 ns typical propagation delay is useful for registered datapaths that must operate close to modern system clocks. The obsolete lifecycle status makes this primarily a legacy-maintenance choice; validate signal integrity, supply levels, and programming-file compatibility before adapting it to a new design.
おすすめ
Data Acquisition and Instrumentation Control
For data-acquisition equipment, the LC4064C-25T48C can coordinate sample sequencing, trigger routing, status flags, and front-panel control signals. The 64 macrocells allow several acquisition channels and support functions to be consolidated into one programmable-logic device, while 32 user I/O pins can connect counters, sensors, and interface transceivers. A 2.5 ns typical propagation delay can assist with tightly registered timing paths. Because precision analog performance depends on the surrounding circuitry, use the CPLD for control rather than signal conditioning, and verify its exact temperature grade and supply arrangement in instrumentation equipment.
おすすめ
Embedded System Glue Logic
The LC4064C-25T48C is suitable for implementing glue logic between a processor, memory, and discrete peripherals. Its 64 macrocells can handle bus arbitration, chip-select generation, interrupt routing, and programmable delay or edge-detection functions, while 32 user I/O pins provide practical connectivity for a compact controller. The 2.5 ns typical propagation delay helps minimize uncertainty in synchronous interface paths. For new embedded platforms, first evaluate whether a current microcontroller or CPLD offers better lifecycle assurance; for repairs, preserve the original configuration and confirm that pin multiplexing and programming-tool support remain available.
おすすめ
LED and Display Sequencing Control
The LC4064C-25T48C can generate display scan sequencing, key-matrix scanning, indicator timing, and alarm-control logic in LED-oriented systems. Its 64 macrocells support multiple counter and decode functions, and the 32 user I/O pins can drive multiplexed display and front-panel signals. The 2.5 ns typical propagation delay offers more margin than slower CPLD grades for registered display timing. The device does not generate regulated display power or drive high-current LEDs directly, so external buffers and appropriate logic-level voltage compatibility are required. Its obsolete status also makes active-platform evaluation preferable for new display products.
おすすめ
Legacy Security and Surveillance Control
The LC4064C-25T48C can implement timing, event sequencing, and interface logic for legacy security and surveillance equipment. Its 64 macrocells allow multiple alarm zones, trigger conditions, and recorder-control paths to be combined, while 32 user I/O pins support sensors and status signals. The 2.5 ns typical propagation delay supports registered event logic rather than long combinational chains. Because the device is obsolete, use it only where the existing PCB, programming file, and tested system behavior justify retention. Confirm supply tolerances, temperature limits, and any regulatory requirements for the finished surveillance product.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: LC4064C-25T48C — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | LC4064C-25TN48C | LC4064B-25T48C | LC4064V-25T48C | XC2C64A-5QFG48C | XC2C64A-7QFG48C |
|---|---|---|---|---|---|---|
| Brand | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor |
| Package | 48-TQFP (7 x 7 mm) | 48-TQFP (7 x 7 mm) | 48-TQFP (7 x 7 mm) | 48-TQFP (7 x 7 mm) | QFG-48 (7 x 7 mm) | QFG-48 (7 x 7 mm) |
| Device Type | CPLD | CPLD | CPLD | CPLD | CPLD | CPLD |
| Macrocell Count | 64 macrocells | 64 macrocells | 64 macrocells | 64 macrocells | 64 macrocells | 64 macrocells |
| User I/O Count | 32 I/O pins | 32 I/O pins | 32 I/O pins | 32 I/O pins | 32 I/O pins | 32 I/O pins |
| Target Typical Propagation Delay | 2.5 ns | 2.5 ns | 2.5 ns | 2.5 ns | 5 ns class | 7 ns class |
| In-System Programming | Yes | Yes | Yes | Yes | Yes | Yes |
| Lifecycle Status | Obsolete | Obsolete | Obsolete | Obsolete | Obsolete | Obsolete |
主な差別化要因
- Faster -25 speed grade within the LC4064C family (vs LC4064C-75T48C)
- Direct 64-macrocell cross-reference candidate (vs XC2C64A-5QFG48C)
- Same-package selection within the original manufacturer portfolio (vs LC4064B-25T48C)
設計ノート
Create the 48-pin TQFP footprint from the manufacturer package drawing rather than inferring it from the generic T48 code. Confirm pin-1 orientation, lead width, pitch, courtyard, solder-mask relief, and paste geometry against the selected assembly process. Preserve the original land pattern when maintaining an obsolete board because changing package geometry or paste apertures can create solder bridges across the 0.5 mm-class lead pitch.
Separate the device's core and I/O supply requirements in the schematic and follow the datasheet's decoupling recommendations. The listed core supply range of 1.65 V to 1.95 V and the family's 1.8 V, 2.5 V, and 3.3 V options must not be treated as interchangeable. Check every power pin against the exact ordering code and verify that external interface levels cannot exceed the device's allowed voltage range.
Keep the configuration interface and clock paths away from switching-regulator outputs and high-current return paths. Provide a continuous ground reference under the device, place bypass capacitors close to their assigned pins, and avoid routing sensitive inputs alongside programming signals. These measures reduce simultaneous-switching noise and ground bounce, both of which can create false transitions or unstable configuration behavior in an older CPLD design.
Do not select a related LC4064 or XC2C64A part solely from macrocell count and package size. Compare configuration architecture, programming file compatibility, pin multiplexing, I/O standards, supply voltages, timing constraints, and the meaning of each speed grade. The -25 and -7 designations represent materially different timing classes, and obsolete-device sourcing requires documented part provenance and condition verification.
コンプライアンス情報
No explicit environmental or automotive compliance declaration was identified for this exact ordering code. Confirm the original manufacturer documentation and applicable product requirements before use.