LC4064C-25T48C - 64-Macrocell 2.5 ns CPLD | Lattice Semiconductor
MPN: LC4064C-25T48C ✗ Tapus ng BuhayLC4064C-25T48C Ulas
A complex programmable logic device, or CPLD, is a user-programmable semiconductor that combines nonvolatile configuration memory, programmable logic, and I/O structures. In the broader hierarchy, the LC4064C is a CPLD, a programmable logic device, and a semiconductor. Its nonvolatile configuration allows the implemented control, interface, or glue logic to remain in the circuit without continuous configuration from an external processor after power-up.
The LC4064C-25T48C provides 64 macrocells and 32 user I/O pins in a 7 x 7 mm surface-mount package. Its 2.5 ns speed designation is intended for designs requiring faster logic propagation than slower grades in the same device family. In-system programmability also permits configuration updates through the device programming interface, which is useful during manufacturing, prototyping, and field-update workflows.
The part is identified by the LC4064C series, a -25 speed grade, and a T48 package code. The listed operating supply options include 3.3 V, 2.5 V, and 1.8 V, while the core supply range is identified as 1.65 V to 1.95 V. These options make the device relevant to mixed-voltage systems in which control logic interfaces with modern low-voltage digital rails.
Typical uses include peripheral-interface bridging, bus decoding, industrial control logic, instrumentation, embedded system glue logic, and compact communication-equipment control blocks. The 32 user I/O pins can support interfaces that do not require the larger pin count of an FPGA, while the 64 macrocells provide substantially more logic capacity than small generic array logic devices.
Designers should verify the exact I/O voltage, timing, pinout, and power requirements against the manufacturer datasheet before layout. Because a 48-pin TQFP has closely spaced leads, PCB routing should preserve adequate clearances and provide a continuous ground plane. Programming signals and configuration pins must also follow the manufacturer's recommended interface and termination guidance.
This page organizes the device's programmable-logic characteristics, pin-compatible alternatives, application guidance, and engineering trade-offs into a practical selection reference. It also distinguishes the -25 speed grade from related device variants so engineers can assess lifecycle, timing, package, and replacement implications before committing a design.
Mga alternatibo na pwedeng ilagay na LC4064C-25T48C — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.
Variante sa Seri na ito
Katulad na modelo sa serye na katugma sa pagpasok LC4064C-25T48C (parehas na form factor at footprint) — pagkakaiba sa Package, Device Type, Lead-Free Status, Core Supply Voltage, Logic Capacity.
LC4064C-25TN48C
✅ Drop-In📋 Alternatibo na Reference (hindi sa katalogo)
LC4064B-25T48C
✅ Drop-InMagkontak para sa presyo
Tingnan ang Datasheet →LC4064V-25T48C
✅ Drop-InMagkontak para sa presyo
Tingnan ang Datasheet →XC2C64A-5QFG48C
✅ Drop-InMagkontak para sa presyo
Tingnan ang Datasheet →XC2C64A-7QFG48C
✅ Drop-InMagkontak para sa presyo
Tingnan ang Datasheet →LC4064C-25T48C Mga Pinakamataas na Rating at Electrical Characteristics
| Device Type | Complex Programmable Logic Device (CPLD) |
| Product Family | ispMACH 4000C SuperFAST High Density PLD |
| Macrocell Count | 64 macrocells |
| User I/O Count | 32 I/O pins |
| Typical Propagation Delay | 2.5 ns |
| Speed Grade | -25 |
| Packhaging | 48-TQFP, 7 x 7 mm |
| Uri ng Pagpapasok | Surface mount |
| Configuration Type | In-system programmable |
| Configuration Memory | Nonvolatile |
| Supported I/O Supply Options | 3.3 V, 2.5 V, 1.8 V |
| Core Supply Voltage | 1.65 V to 1.95 V |
| Logic Capacity | 64 macrocells |
| Package Pin Count | 48 pins |
| RoHS Compliance | unknown |
| REACH Compliance | unknown |
| AEC-Q100 Qualification | unknown |
| Lead-Free Status | unknown |
| Halogen-Free Status | unknown |
Gabay sa Pin Configuration ng LC4064C-25T48C 48 pins
Pin configuration para sa LC4064C-25T48C (48 pins package). Kasama sa digital IC na ito ang GPIO, mga communication interface (UART, SPI, I2C), at mga power pin. Sumangguni sa datasheet ng manufacturer para sa mga alternatibong function ng pin at mga opsyon sa configuration. Mahalaga para sa disenyo ng embedded system at PCB layout.
Wala ng detalyadong pinout data na magagamit para sa LC4064C-25T48C.
Sumangguni sa datasheet para sa buong pin configuration.
Tipikal na mga Gamit
LC4064C-25T48C ay nararapat para sa 6 aplikasyons: Industrial Peripheral Interface Bridging, Compact Communication Equipment Control, Data Acquisition and Instrumentation Control, Embedded System Glue Logic, LED and Display Sequencing Control, Legacy Security and Surveillance Control.
Industrial Peripheral Interface Bridging
The LC4064C-25T48C fits peripheral-interface bridging because its 64 macrocells can implement multiple state machines, address decoders, and control paths while 32 user I/O pins connect two digital domains. The 2.5 ns typical propagation delay provides additional timing margin for synchronous control logic. In an industrial controller, the CPLD can translate legacy bus signals, qualify asynchronous inputs, and sequence device enables. Because the device is obsolete, retain its pin mapping and programming setup for maintenance, and verify the operating-temperature grade and isolation requirements of the complete equipment before deployment.
Inirekomenda
Compact Communication Equipment Control
The LC4064C-25T48C can implement protocol framing, command decoding, and flow-control state machines in communication equipment where a small FPGA would be unnecessary. Its 64 macrocells provide enough logic for multiple coordinated channels, while the 32 user I/O pins support data, status, and configuration connections. The 2.5 ns typical propagation delay is useful for registered datapaths that must operate close to modern system clocks. The obsolete lifecycle status makes this primarily a legacy-maintenance choice; validate signal integrity, supply levels, and programming-file compatibility before adapting it to a new design.
Inirekomenda
Data Acquisition and Instrumentation Control
For data-acquisition equipment, the LC4064C-25T48C can coordinate sample sequencing, trigger routing, status flags, and front-panel control signals. The 64 macrocells allow several acquisition channels and support functions to be consolidated into one programmable-logic device, while 32 user I/O pins can connect counters, sensors, and interface transceivers. A 2.5 ns typical propagation delay can assist with tightly registered timing paths. Because precision analog performance depends on the surrounding circuitry, use the CPLD for control rather than signal conditioning, and verify its exact temperature grade and supply arrangement in instrumentation equipment.
Inirekomenda
Embedded System Glue Logic
The LC4064C-25T48C is suitable for implementing glue logic between a processor, memory, and discrete peripherals. Its 64 macrocells can handle bus arbitration, chip-select generation, interrupt routing, and programmable delay or edge-detection functions, while 32 user I/O pins provide practical connectivity for a compact controller. The 2.5 ns typical propagation delay helps minimize uncertainty in synchronous interface paths. For new embedded platforms, first evaluate whether a current microcontroller or CPLD offers better lifecycle assurance; for repairs, preserve the original configuration and confirm that pin multiplexing and programming-tool support remain available.
Inirekomenda
LED and Display Sequencing Control
The LC4064C-25T48C can generate display scan sequencing, key-matrix scanning, indicator timing, and alarm-control logic in LED-oriented systems. Its 64 macrocells support multiple counter and decode functions, and the 32 user I/O pins can drive multiplexed display and front-panel signals. The 2.5 ns typical propagation delay offers more margin than slower CPLD grades for registered display timing. The device does not generate regulated display power or drive high-current LEDs directly, so external buffers and appropriate logic-level voltage compatibility are required. Its obsolete status also makes active-platform evaluation preferable for new display products.
Inirekomenda
Legacy Security and Surveillance Control
The LC4064C-25T48C can implement timing, event sequencing, and interface logic for legacy security and surveillance equipment. Its 64 macrocells allow multiple alarm zones, trigger conditions, and recorder-control paths to be combined, while 32 user I/O pins support sensors and status signals. The 2.5 ns typical propagation delay supports registered event logic rather than long combinational chains. Because the device is obsolete, use it only where the existing PCB, programming file, and tested system behavior justify retention. Confirm supply tolerances, temperature limits, and any regulatory requirements for the finished surveillance product.
Inirekomenda
Buod ng mga Inirekomendang Produkto
Impormasyon ng Talumpati sa Engineering for LC4064C-25T48C — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.
Paunawang Hanapin
Ikabit sa Mga Alternatibo
| Parametro | Ito ang Producto | LC4064C-25TN48C | LC4064B-25T48C | LC4064V-25T48C | XC2C64A-5QFG48C | XC2C64A-7QFG48C |
|---|---|---|---|---|---|---|
| Brand | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor |
| Package | 48-TQFP (7 x 7 mm) | 48-TQFP (7 x 7 mm) | 48-TQFP (7 x 7 mm) | 48-TQFP (7 x 7 mm) | QFG-48 (7 x 7 mm) | QFG-48 (7 x 7 mm) |
| Device Type | CPLD | CPLD | CPLD | CPLD | CPLD | CPLD |
| Macrocell Count | 64 macrocells | 64 macrocells | 64 macrocells | 64 macrocells | 64 macrocells | 64 macrocells |
| User I/O Count | 32 I/O pins | 32 I/O pins | 32 I/O pins | 32 I/O pins | 32 I/O pins | 32 I/O pins |
| Target Typical Propagation Delay | 2.5 ns | 2.5 ns | 2.5 ns | 2.5 ns | 5 ns class | 7 ns class |
| In-System Programming | Yes | Yes | Yes | Yes | Yes | Yes |
| Lifecycle Status | Obsolete | Obsolete | Obsolete | Obsolete | Obsolete | Obsolete |
Pangunahing mga Pagkakaiba
- Faster -25 speed grade within the LC4064C family (kumpara saLC4064C-75T48C)
- Direct 64-macrocell cross-reference candidate (kumpara saXC2C64A-5QFG48C)
- Same-package selection within the original manufacturer portfolio (kumpara saLC4064B-25T48C)
Talaan ng Disenyo
Create the 48-pin TQFP footprint from the manufacturer package drawing rather than inferring it from the generic T48 code. Confirm pin-1 orientation, lead width, pitch, courtyard, solder-mask relief, and paste geometry against the selected assembly process. Preserve the original land pattern when maintaining an obsolete board because changing package geometry or paste apertures can create solder bridges across the 0.5 mm-class lead pitch.
Separate the device's core and I/O supply requirements in the schematic and follow the datasheet's decoupling recommendations. The listed core supply range of 1.65 V to 1.95 V and the family's 1.8 V, 2.5 V, and 3.3 V options must not be treated as interchangeable. Check every power pin against the exact ordering code and verify that external interface levels cannot exceed the device's allowed voltage range.
Keep the configuration interface and clock paths away from switching-regulator outputs and high-current return paths. Provide a continuous ground reference under the device, place bypass capacitors close to their assigned pins, and avoid routing sensitive inputs alongside programming signals. These measures reduce simultaneous-switching noise and ground bounce, both of which can create false transitions or unstable configuration behavior in an older CPLD design.
Do not select a related LC4064 or XC2C64A part solely from macrocell count and package size. Compare configuration architecture, programming file compatibility, pin multiplexing, I/O standards, supply voltages, timing constraints, and the meaning of each speed grade. The -25 and -7 designations represent materially different timing classes, and obsolete-device sourcing requires documented part provenance and condition verification.
Impormasyon ng Pagsunod sa Kautusan
No explicit environmental or automotive compliance declaration was identified for this exact ordering code. Confirm the original manufacturer documentation and applicable product requirements before use.