Analog Devices

MAX202EEUE+T - 120kbps 5V RS-232 | Analog Devices

MPN: MAX202EEUE+T ✓ Aktif
+5V Vdss 16-pin TSSOP Package
MOQ: 1 |

MAX202EEUE+T Ringkasan

Analog Devices MAX202EEUE+T is a 5V RS-232 transceiver with two driver and two receiver channels, data rates up to 120kbps, and ±15kV ESD protection in a 16-pin TSSOP package. The MAX202E family supports single-supply operation through integrated charge-pump circuitry and complies with EIA/TIA-232E and CCITT V.28 requirements.

An RS-232 transceiver is an interface IC that converts logic-level signals between a host or controller and a RS-232 serial port. Its drivers translate low-voltage logic levels into RS-232 bipolar levels, while its receivers perform the reverse conversion. The MAX202EEUE+T belongs to the RS-232 transceiver hierarchy, which also includes line drivers, line receivers, interface controllers, and broader communication interface semiconductors.

The two-driver, two-receiver arrangement supports full-duplex serial communication through two data channels. Its 120kbps maximum data rate provides sufficient margin for common serial links while meeting the EIA/TIA-232E and CCITT V.28 specifications identified by Analog Devices. Integrated charge-pump circuitry generates the bipolar voltage required by RS-232 drivers from a single +5V supply, reducing the external power-supply complexity associated with older interface designs.

ESD protection is a central feature of this device. The manufacturer describes the MAX202E family as having ±15kV Human Body Model ESD protection, making the interface suitable for systems where cables and connectors can be exposed to electrostatic discharge. The MAX202EEUE+T combines that protection with integrated charge-pump operation in a compact 16-pin TSSOP package suited to dense industrial, instrumentation, and embedded-control equipment.

Typical uses include serial service ports, test and measurement equipment, industrial controllers, data-acquisition systems, and embedded systems that exchange data with RS-232 peripherals. Two channels can connect separate transmit and receive paths, while full-duplex operation allows the endpoint to send and receive simultaneously. The 120kbps rate is especially appropriate for configuration interfaces, diagnostic links, and legacy equipment connectivity rather than high-volume local-area networking.

When laying out a design, place the charge-pump capacitors and interface bypass capacitors close to their designated pins, and route the RS-232 traces away from sensitive analog or high-speed digital signals. Treat the external connector as an ESD entry point, use a suitable chassis and signal-ground strategy, and verify the complete interface against the system grounding requirements. The manufacturer datasheet is the authoritative source for pin assignment, capacitor values, and test conditions.

This product page combines the confirmed MAX202E specifications with package, sourcing, replacement, and design guidance. It also distinguishes true pin-compatible drop-in options from family members that use different packages, helping engineers avoid incorrect substitutions when reusing an existing PCB layout.

Alternatif penggantian untuk MAX202EEUE+T — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.

Variasi di dalam seri ini

Model-series yang sama yang kompatibel dengan penggantian MAX202EEUE+T (sama faktor bentuk dan footprint) — berbeda di dalam Charge Pump, ESD Protection, Interface Standard, Product Type, Supply Voltage.

Analog Devices
Charge Pump: Integrated, no external charge-pump capacitors required
ESD Protection: ±15 kV human body model
Interface Standard: EIA/TIA-232E and CCITT V.28
Bandingkan dengan MAX202EEUE+T →

Tidak ada alternatif pengganti yang tersedia untuk produk ini.

Permintaan Alternatif

MAX202EEUE+T Spesifikasi

Product Type RS-232 transceiver
Number of Drivers 2 channels
Number of Receivers 2 channels
Laju Data Up to 120kbps
Tegangan Pemuat +5V
Interface Standard RS-232
Compliance EIA/TIA-232E and CCITT V.28
ESD Protection ±15kV HBM
Charge Pump Integrated
Paket 16-pin TSSOP
Tipe Mounting Surface mount

MAX202EEUE+T 16-pin tssop Diamant Konfigurasi Panduan

Konfigurasi pin untuk MAX202EEUE+T (16-pin tssop pakai pakai). Penomoran pin, fungsi, dan diagram koneksi ditetapkan dalam datasheet produsen. Lihatnya untuk footprint dan pedoman perpindahan paruh.

Diamant diagram pakai pakai 16-pin tssop untuk MAX202EEUE+T

Tidak ada data diatribut pin yang tersedia untuk MAX202EEUE+T.

Lihat ke: datasheet produk untuk konfigurasi pin penuh.

Aplikasi Umum

MAX202EEUE+T cocok untuk 6 aplikasis: Industrial Controller Serial Port, Test and Measurement Equipment, Embedded Data Acquisition, Serial Service and Diagnostic Port, Legacy Peripheral Connectivity, Secure Device Management Interface.

🏭

Industrial Controller Serial Port

The MAX202EEUE+T is appropriate for an industrial controller that must communicate with a service computer or peripheral through a legacy RS-232 link. Its two drivers and two receivers support full-duplex operation, while the 120kbps maximum rate covers configuration, diagnostic, and supervisory protocols. Operation from one +5V rail simplifies controller power design because the integrated charge pump generates the bipolar driver voltage internally. The ±15kV HBM protection also adds useful robustness at an exposed connector, although the finished system still needs appropriate grounding, shielding, and cable treatment.

🔧

Test and Measurement Equipment

The MAX202EEUE+T can connect laboratory instruments, fixture controllers, and calibration equipment to RS-232-capable computers. Two independent channels allow simultaneous command and response traffic, which is useful in control loops where full-duplex behavior simplifies software communication. The 120kbps rate is more than adequate for many legacy instrument-control protocols, and the integrated charge pump avoids a separate bipolar supply. Its 16-pin TSSOP format also supports compact front-panel and internal measurement designs while maintaining ±15kV HBM-rated interface protection.

📡

Embedded Data Acquisition

The MAX202EEUE+T fits an embedded data-acquisition controller that must communicate with external sensors, laboratory modules, or service equipment through RS-232. Two driver and receiver channels can support two full-duplex links, while the 120kbps data rate suits command, status, and moderate measurement-data transfers. The single +5V architecture reduces the number of external power rails in compact embedded equipment, and the integrated charge pump simplifies implementation. Its TSSOP package is useful where board area is constrained, subject to careful pin assignment and charge-pump capacitor placement.

🔧

Serial Service and Diagnostic Port

A service or diagnostic connector is a strong application for the MAX202EEUE+T because legacy equipment commonly exposes RS-232 for firmware loading, status reporting, and parameter configuration. The device provides two transmit and two receive channels, allowing a controller to exchange commands and responses over a full-duplex link at up to 120kbps. Its ±15kV HBM protection is particularly relevant when the serial connector is accessible during installation or maintenance. The external connector still requires suitable chassis grounding and ESD strategy for a reliable industrial installation.

🖥️

Legacy Peripheral Connectivity

The MAX202EEUE+T provides a practical bridge between modern +5V logic and legacy RS-232 peripherals such as printers, scanners, scales, or older laboratory devices. The 120kbps rate matches the performance class of many RS-232 and V.28 links, while the integrated charge pump permits operation without a separate negative supply rail. Two channels can manage two serial functions or provide full-duplex traffic on one port. The ±15kV HBM protection improves tolerance to electrostatic discharge encountered during routine cable handling.

🖥️

Secure Device Management Interface

The MAX202EEUE+T can support a low-bandwidth management or backplane interface in security and communications equipment that retains an RS-232 service path. Two channels allow separate command and status connections, while 120kbps operation is suitable for configuration exchanges rather than bulk traffic. Its single +5V operation aligns with many digital subsystems, and the integrated charge pump minimizes external circuitry. The ±15kV HBM protection is valuable in chassis-mounted equipment where the serial connector may be touched during installation or service.

What are the key specifications of MAX202EEUE+T that engineers should know?
The MAX202EEUE+T is a +5V RS-232 transceiver with two drivers, two receivers, a maximum data rate of 120kbps, and ±15kV HBM ESD protection in a 16-pin TSSOP package. According to the Analog Devices MAX202E datasheet, it also includes an integrated charge pump and meets EIA/TIA-232E and CCITT V.28 specifications when loaded. These characteristics make it suitable for compact, full-duplex RS-232 links operating from a single 5V rail.
Where can I download the MAX202EEUE+T datasheet PDF?
The official MAX202E-MAX241E datasheet PDF is available from Analog Devices at https://www.analog.com/media/en/technical-documentation/data-sheets/MAX202E-MAX241E.pdf. It contains the authoritative electrical characteristics, package information, pin descriptions, charge-pump capacitor requirements, and application guidance for the MAX202E family. The manufacturer product page for MAX202E is also available for family-level selection information.
Where can I find the MAX202EEUE+T pinout?
Use the pin-description table and package drawing in the official Analog Devices MAX202E-MAX241E datasheet to assign the MAX202EEUE+T pins. The confirmed package is 16-pin TSSOP, but individual pin names and numbers are not reproduced on this page because the available product excerpts do not include the complete pin table. The manufacturer datasheet is required for PCB routing, capacitor placement, and connector assignment.
Is MAX202EEUE+T suitable for RS-232 communication at 120kbps?
Yes, the MAX202EEUE+T supports data rates up to 120kbps. According to the Analog Devices MAX202E datasheet, its drivers and receivers meet EIA/TIA-232E and CCITT V.28 specifications at data rates up to 120kbps when loaded. The 16-pin TSSOP implementation provides two transmit and two receive channels, allowing a full-duplex interface with simultaneous communication over two serial channels.
What does ±15kV ESD protection mean for MAX202EEUE+T designs?
The ±15kV rating means the MAX202EEUE+T drivers and receivers incorporate protection rated for ±15kV Human Body Model ESD exposure. Analog Devices identifies this protection as a family feature designed for RS-232 and V.28 communications in harsh environments. It improves robustness at externally accessible connectors, although ESD protection does not replace correct grounding, cable design, shielding, and other system-level electrostatic-discharge controls.
Does MAX202EEUE+T need external charge-pump capacitors?
The MAX202EEUE+T includes integrated charge-pump circuitry for generating the bipolar voltage required by an RS-232 driver from a single +5V supply. The MAX202E family still requires the external capacitors specified by the manufacturer around the charge-pump and supply pins. Use the values, tolerances, and placement guidance in the official datasheet because the capacitor network is part of correct operation and cannot be replaced with arbitrary values.
Where can I buy MAX202EEUE+T and what is its current price?
Use the Request a Quote form on this page to request current MAX202EEUE+T availability, commercial terms, and unit pricing from XAIPART. The part is identified as a 16-pin TSSOP, tape-and-reel ordering variant of the Analog Devices MAX202E family. Current pricing and lead time should be confirmed through the quotation process because inventory and commercial conditions can change.
What is the lead time for MAX202EEUE+T?
The current lead time for MAX202EEUE+T should be requested through the Request a Quote form on this page. The exact MPN is the Analog Devices +5V, 120kbps, 16-pin TSSOP version with ±15kV HBM ESD protection. Share the required quantity, packaging preference, and target delivery date with XAIPART so the response can reflect the current supply position rather than an outdated schedule.
Is MAX202EEUE+T in stock?
Current MAX202EEUE+T stock status should be confirmed by submitting the Request a Quote form on this page. Availability can vary by order quantity and manufacturing condition, so a general listing does not establish a guaranteed allocation. The exact ordering code, MAX202EEUE+T, identifies the Analog Devices +5V RS-232 transceiver in a 16-pin TSSOP package with ±15kV HBM ESD protection.
What is the best drop-in replacement for MAX202EEUE+T?
No additional drop-in replacement could be confirmed from the available cross-reference results without risking an incorrect PCB substitution. Several MAX202E family members use narrow SOIC or wide SOIC packages rather than the target 16-pin TSSOP footprint. A valid replacement must match the package, pin functions, supply voltage, channel count, data rate, charge-pump capacitor connections, and ESD requirements; confirm any proposed part against the official MAX202E datasheet before release.
Can MAX202CSE+T replace MAX202EEUE+T?
No. MAX202CSE+T is not a drop-in replacement for MAX202EEUE+T because the available comparison identifies a narrow 16-pin SOIC package rather than the target 16-pin TSSOP package. Even if its core electrical functions are similar, the land pattern, lead geometry, and potentially the pin layout differ. It therefore requires PCB review or redesign and must not be treated as a board-compatible substitution.
Can MAX202ECWE+T replace MAX202EEUE+T?
No. MAX202ECWE+T uses a 16-pin WSOIC package, while MAX202EEUE+T uses a 16-pin TSSOP package. The comparison information confirms that the package and case differ, so MAX202ECWE+T is not pin-to-pin board compatible with the target device. It may provide similar RS-232 functionality, but the footprint and possibly the terminal arrangement must be checked before use.
When should I choose MAX202EEUE+T over another MAX202E package option?
Choose MAX202EEUE+T when the PCB already uses the 16-pin TSSOP MAX202E footprint and requires two full-duplex RS-232 channels, a single +5V supply, data rates up to 120kbps, and ±15kV HBM ESD protection. Choose another MAX202E package option only when the PCB uses that package or is being redesigned. Functionally similar narrow-SOIC and wide-SOIC versions are not drop-in choices for an existing TSSOP layout.
Is MAX202EEUE+T suitable for industrial and instrumentation serial ports?
Yes, the MAX202EEUE+T is well suited to compact RS-232 ports in industrial controllers, instruments, and diagnostic equipment. Its two drivers and two receivers support full-duplex links, the 120kbps rate covers many configuration and control protocols, and the ±15kV HBM protection strengthens the interface against electrostatic discharge. Industrial suitability still depends on the device's confirmed operating-temperature grade and the completed system's environmental requirements.
What can replace MAX202EEUE+T?
A valid replacement for MAX202EEUE+T must be a true board-compatible substitute: 16-pin TSSOP, pin-to-pin compatible, and equivalent in RS-232 channel count, 5V operation, data rate, charge-pump architecture, and ESD protection. The available family comparisons identify narrow-SOIC and wide-SOIC alternatives, but those are not drop-in replacements. Ask XAIPART to review an exact candidate part number against the manufacturer pinout and electrical specifications before committing it to a redesign.
How should MAX202EEUE+T be connected to an RS-232 DB9 connector?
Route each driver output to the appropriate RXD, TXD, and ground conductors at the connector, and route each receiver input from the connector's TXD-related signal path as defined by the system interface. Keep the ESD-protected transceiver side connected through the shortest practical signal path and follow the MAX202EEUE+T data-sheet pin table for exact assignments. The chassis-to-signal-ground arrangement should be selected for the equipment's EMC and ESD strategy.

Data referensi engineering untuk MAX202EEUE+T — pembandingan, panduan desain, dan informasi konformitas.

Panduan Pemilihan

Choose MAX202EEUE+T when an existing PCB uses the 16-pin TSSOP MAX202E footprint and requires two full-duplex RS-232 channels, +5V single-supply operation, data rates up to 120kbps, and ±15kV HBM ESD protection. Its integrated charge pump simplifies the power architecture, while the compact package supports space-constrained controller and instrument designs. MAX202CSE+T and MAX202ECWE+T can serve similar electrical functions, but their narrow-SOIC and wide-SOIC packages are not drop-in choices for a TSSOP layout. For a new design, compare package availability, operating-temperature grade, lifecycle status, channel requirements, and verified electrical characteristics. Do not approve a substitute solely because it is called MAX202E; confirm the exact ordering code, pin table, footprint, capacitor network, and supply requirements against the manufacturer datasheet.

Pembandingan dengan Alternatif

Parameter Umum Produk Ini
Package 16-pin TSSOP
Brand Analog Devices
Interface Type RS-232 transceiver
Number of Drivers 2
Number of Receivers 2
Maximum Data Rate 120kbps
Supply Voltage +5V
ESD Protection ±15kV HBM
Charge Pump Integrated
Compliance EIA/TIA-232E and CCITT V.28

Diferensiator Kunci

  • Two-channel full-duplex RS-232 interface (vsMAX202CSE+T)
  • TSSOP footprint supports compact board layouts (vsMAX202ECWE+T)
  • Single-supply operation with integrated charge pump (vsMAX202EESE+T)

Catatan Desain

Place the charge-pump capacitors and supply bypass capacitor directly beside the pins identified in the manufacturer pin table, keeping each loop short and symmetrical as shown in the datasheet application circuit. Avoid routing the high-voltage RS-232 driver outputs beneath sensitive analog circuitry. The 16-pin TSSOP footprint offers limited lead spacing, so inspect the land pattern and solder-mask geometry against the official package drawing before releasing artwork.

Keep the RS-232 connector, protection network, and transceiver driver/receiver paths together, and separate them from clocks, precision analog inputs, and high-speed digital routing. Ground the connector shell according to the product's EMC architecture rather than assuming a universal signal-ground connection. Inexpensive MAX202EEUE+T implementations benefit greatly from short return paths because long exposed traces can re-couple transient energy that internal ESD protection alone cannot eliminate.

Do not substitute a narrow-SOIC or wide-SOIC MAX202E variant for the MAX202EEUE+T on an existing TSSOP board. The packages have different footprints and may also differ in terminal assignment, so they are not drop-in replacements. Likewise, do not omit the manufacturer-specified charge-pump capacitors: although the charge pump is integrated, the external capacitor network remains part of the circuit and affects operation. Verify pin names and values against the official datasheet.

Informasi Konformitas

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Bebas Logam Lengket
Unknown
Bebas Halogena
Unknown
Mineral Konflik
Unknown

The product excerpts identify EIA/TIA-232E and CCITT V.28 interface compliance but do not state component-level environmental or material compliance. AEC-Q100 is not applicable to this RS-232 interface IC.

Pencarian Terkait

MAX202EEUE+T datasheet MAX202EEUE+T pinout MAX202EEUE+T datasheet pdf MAX202EEUE+T replacement MAX202EEUE+T equivalent MAX202EEUE+T price MAX202EEUE+T stock Analog Devices MAX202EEUE+T MAX202EEUE+T TSSOP-16 MAX202EEUE+T 120kbps RS-232 MAX202EEUE+T industrial serial port MAX202EEUE+T vs MAX202CSE+T

Komponen dan Istilah Terkait

Analog Devices MAX202EEUE+T MAX202E MAX202CSE+T MAX202ECWE+T MAX202EESE+T RS-232 transceiver RS-232 line driver line receiver interface IC communication interface semiconductor EIA/TIA-232E CCITT V.28 120kbps +5V supply integrated charge pump ±15kV HBM ESD protection TSSOP-16 TSSOP surface mount full-duplex serial communication
Kutipan Cepat RFQ
Isi detail lengkap — tim penjualan kami akan membalas dalam 24 jam
Nomor Part Manufaktur Paket QTY Harga Target Lengkap
✓
Kutipan telah disubmit!

Kami akan membalas email Anda dalam 24 jam

1
RFQ Dikirim
2
Kutipan Diterima
3
Order Ditempatkan
4
Pembayaran
5
Dikirim
6
Dikirim
Lihat Detil RFQ