Microchip Technology

MCP3422A6-E/MS - 18-Bit 2-Input ADC | Microchip Technology

MPN: MCP3422A6-E/MS ✓ Aktif
2.7 V to 5.5 V Vdss 8-MSOP Package
MOQ: 1 |

MCP3422A6-E/MS Ringkasan

The Microchip Technology MCP3422A6-E/MS is a low-noise 18-bit delta-sigma analog-to-digital converter with two differential inputs, a 3.75 Hz conversion rate, and an 8-MSOP package. It operates from 2.7 V to 5.5 V and uses an I²C interface for digital communication. The onboard 2.048 V precision reference supports a differential input range of ±2.048 V.

A delta-sigma ADC is a voltage-to-digital converter that samples an analog input and converts it through continuous-time integration and noise shaping before digital filtering. This architecture belongs to the ADC hierarchy and is particularly useful when low noise, high resolution, and limited conversion bandwidth are more important than rapid sampling. The MCP3422 combines these characteristics with differential analog inputs and a small package.

The MCP3422A6 provides conversion resolution up to 18 bits, two analog input channels, and an onboard reference. Its low-noise architecture is suited to precision measurements rather than waveform capture. The 3.75 Hz rate makes it appropriate for slowly changing inputs such as temperature, pressure, load-cell, and industrial process signals. Differential inputs also help reject common-mode disturbance when the source is connected appropriately.

Microchip Technology positions the MCP3422 within the MCP342X family of low-noise, high-accuracy converters. The device combines an internal reference, programmable gain, differential inputs, and an I²C digital interface in an 8-MSOP package. The resolution and low conversion rate create a favorable combination for instrumentation but make the converter unsuitable for high-bandwidth signals or audio-rate sampling.

Typical applications include precision temperature sensing, pressure transducers, load cells, battery monitoring, current measurement, environmental instrumentation, and low-frequency industrial data acquisition. The MCP3422A6 is especially useful where differential analog conditioning, an internal reference, and a compact PCB footprint reduce the number of external components.

PCB implementation should preserve a quiet analog ground path and place input, reference, and decoupling connections according to the manufacturer datasheet. Verify the selected conversion mode, data rate, gain, and I²C address in firmware because resolution and latency are coupled to the operating mode.

This product record combines the manufacturer device description with distributor package, voltage, conversion-rate, and RoHS information. It also organizes same-family drop-in options and engineering guidance around the MCP3422A6-E/MS for faster component selection and board-level planning.

Alternatif penggantian untuk MCP3422A6-E/MS — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.

Variasi di dalam seri ini

Model-series yang sama yang kompatibel dengan penggantian MCP3422A6-E/MS (sama faktor bentuk dan footprint) — berbeda di dalam Package, Resolution, Differential Input Range, Conversion Rate, Input Architecture.

Microchip Technology
Package: 8-pin MSOP, 3 mm x 3 mm x 0.85 mm
Resolution: Up to 18 bits
Input Architecture: 2 differential inputs
Microchip Technology
Resolution: 18 bit
Differential Input Range: +/-2.048 V
Microchip Technology
Package: 8-pin MSOP
Resolution: 18 bit
Differential Input Range: -2.048 V to +2.048 V
Microchip Technology
Resolution: 18 bit
Conversion Rate: Approximately 4 samples per second
Input Architecture: 2 analog inputs

MCP3422A5-E/MS

✅ Drop-In
Microchip Technology
📦 8-MSOP
1 sigma-delta ADC · 18 bit · 2 analog inputs · Approximately 4 samples per second · I2C · On-board voltage reference · 8-MSOP · 8 pins

Kontak untuk harga

Lihat Datasheet →

MCP3422A4-E/MS

✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan
Microchip Technology
📦 8-MSOP
18 bit · 2 channels · 2 differential inputs · 1 sigma-delta ADC · 3.75 samples/s · 2.048 V · -2.048 V to +2.048 V · 2.7 V to 5.5 V

Kontak untuk harga

Lihat Datasheet →

MCP3422A3-E/MS

✅ Drop-In
Microchip Technology
📦 8-MSOP
18 bit · 2 · Differential · Sigma-delta · 3.75 samples/s · 2.048 V · ±2.048 V · 2.7 V to 5.5 V

Kontak untuk harga

Lihat Datasheet →

MCP3422A2-E/MS

✅ Drop-In
Microchip Technology
📦 8-MSOP
18-bit delta-sigma ADC · 18 bit · 2 differential inputs · 3.75 kSPS · 2.7 V to 5.5 V · 2.048 V · +/-2.048 V · Integrated, programmable

Kontak untuk harga

Lihat Datasheet →

MCP3422A0-E/MS

✅ Drop-In
Microchip Technology
📦 8-MSOP
Delta-sigma (ΔΣ) · Up to 18 bits · 2 channels · 2 differential inputs · 3.75 samples/s · 2.7 V to 5.5 V · 145 µA · 2.048 V

Kontak untuk harga

Lihat Datasheet →

MCP3422A6-E/MS Rating Maksimal & Karakteristik Listrik

Resolusi 18 bits
Analog Input Channels 2 inputs
Input Architecture Differential
Converter Architecture Delta-sigma (ΣΔ)
Conversion Rate 3.75 Hz
Supply Voltage Range 2.7 V to 5.5 V
Internal Reference Voltage 2.048 V
Differential Input Range ±2.048 V
Digital Interface I²C
Paket 8-MSOP
Jumlah Pin 8 pins
Tipe Mounting Surface mount
Status RoHS Compliant
Integrated Reference Yes

MCP3422A6-E/MS 8-msop Diamant Konfigurasi Panduan

Konfigurasi pin untuk MCP3422A6-E/MS (8-msop pakai pakai). Komponen analog ini memiliki pin masukan, keluaran, dan pengirim daya. Lihat datasheet produsen untuk konfigurasi pin offset null, kompensasi, dan pengaktifan. Ideal untuk peralatan sinyal dan kabel penggandaran.

Diamant diagram pakai pakai 8-msop untuk MCP3422A6-E/MS

Tidak ada data diatribut pin yang tersedia untuk MCP3422A6-E/MS.

Lihat ke: datasheet produk untuk konfigurasi pin penuh.

Aplikasi Umum

MCP3422A6-E/MS cocok untuk 6 aplikasis: Precision Temperature Measurement, Industrial Pressure Transducers, Load-Cell and Force Sensing, Battery and Current Monitoring, Environmental Data Acquisition, Low-Frequency Process Instrumentation.

🌡️

Precision Temperature Measurement

The MCP3422A6-E/MS fits temperature systems that use resistive sensors with slow, low-level changes. Its 18-bit resolution preserves fine measurement detail, while the 3.75 Hz listed conversion rate supports regular updates without the demand of high-speed sampling. Differential inputs can accept the bridge output when common-mode and noise conditions are controlled, and the onboard 2.048 V reference simplifies standalone acquisition. Firmware should reject out-of-range codes, apply sensor linearization, and check the conversion status before reporting temperature.

🏭

Industrial Pressure Transducers

The MCP3422A6-E/MS is appropriate for industrial pressure and level signals that change more slowly than the converter's 3.75 Hz listed rate. Its differential input architecture suits bridge-based or differentially referenced transmitters, while 18-bit resolution supports fine readings over a controlled input range. The internal 2.048 V reference helps establish a stable measurement baseline. Designers should isolate transducer wiring from motor and switching noise, use suitable protection near field terminals, and confirm the transmitter's output range before applying gain.

⚖️

Load-Cell and Force Sensing

The MCP3422A6-E/MS can acquire slowly varying force or weight information from a load-cell bridge when the excitation, common-mode voltage, and output polarity satisfy its analog input limits. The 18-bit conversion resolution supports fine resolution across a scaled bridge output, and differential inputs help reject shared interference on the bridge lines. The 3.75 Hz conversion rate is appropriate for static weighing and force monitoring rather than dynamic impact testing. Calibration should account for bridge sensitivity, offset, gain error, and temperature drift.

🔋

Battery and Current Monitoring

The MCP3422A6-E/MS can support slow battery-voltage or current measurements in energy-monitoring equipment when the converter is operated within its 2.7 V to 5.5 V supply range. The 18-bit resolution can capture small changes in a conditioned current or voltage signal, while differential inputs offer flexibility when the sensing element develops voltage across a shunt. The low update rate matches energy accumulators and supervisory loops. Firmware should perform calibration, detect open or shorted sensing paths, and synchronize measurements with the load state.

🧩

Environmental Data Acquisition

The MCP3422A6-E/MS is useful for environmental monitoring systems that repeatedly measure humidity, gas, or ambient-pressure sensors with slow-moving analog outputs. Its low-noise 18-bit architecture preserves small sensor changes, and the 3.75 Hz listed conversion rate provides periodic updates suitable for environmental logging. The internal reference and compact 8-MSOP footprint simplify multi-channel monitoring boards. Each sensor may require different excitation or filtering, so the analog conditioning network and channel multiplexing strategy should be designed around the source impedance and required update schedule.

📡

Low-Frequency Process Instrumentation

The MCP3422A6-E/MS fits process instrumentation that records controlled analog variables such as tank level, valve position, or remote sensor current. The device's differential inputs, 18-bit resolution, and 3.75 Hz listed rate support accurate periodic readings, while I²C simplifies connection to a controller. A typical implementation places protection and filtering ahead of the ADC, uses a quiet reference path, and calibrates the full measurement chain. Update latency should be checked against process-control timing, and channel switching must allow the converter to settle before reading results.

What is the MCP3422A6-E/MS?
The MCP3422A6-E/MS is a Microchip Technology low-noise, 18-bit delta-sigma ADC with two differential inputs, an I²C interface, and an 8-MSOP package. According to the manufacturer MCP3422 product page, the MCP3422 family includes an onboard 2.048 V precision reference and supports a differential input range of ±2.048 V. It is intended for precision, low-bandwidth instrumentation rather than high-speed waveform acquisition.
What is the conversion rate of the MCP3422A6-E/MS?
The MCP3422A6-E/MS converts at 3.75 Hz. This rate appears in the LCSC component listing, while the Mouser listing also describes it as a 4 SPS device, reflecting the approximate marketing characterization of the conversion rate. The manufacturer identifies the device as an 18-bit delta-sigma converter. Engineers should use the exact conversion-time tables in the manufacturer datasheet when calculating latency.
What supply voltage does the MCP3422A6-E/MS use?
The MCP3422A6-E/MS operates from 2.7 V to 5.5 V. This supply range is stated in the LCSC listing for the exact MCP3422A6-E/MS orderable part. The low-side supply requirement allows the converter to share a regulated rail with common 3.3 V embedded systems. The I²C interface and analog supply requirements should still be checked separately in the manufacturer datasheet.
Does the MCP3422A6-E/MS have an internal voltage reference?
Yes, the MCP3422A6-E/MS includes an onboard 2.048 V precision reference. The manufacturer MCP3422 product page states that this reference enables a differential input range of ±2.048 V, and the device-family datasheet description confirms the same value. Using the internal reference can simplify board design, although external-reference and gain configurations may be preferable when measurement-chain accuracy must track a shared reference.
Is the MCP3422A6-E/MS suitable for temperature and pressure sensing?
The MCP3422A6-E/MS is well suited to slowly varying temperature, pressure, and force measurements because it combines 18-bit resolution with differential inputs and a 3.75 Hz conversion rate. These signals are normally conditioned by a bridge or transmitter before reaching the ADC. Differential wiring helps suppress common-mode voltage, while the low conversion rate supports stable readings rather than rapid transient capture.
Where can I download the MCP3422A6-E/MS datasheet PDF?
The MCP3422A6-E/MS datasheet can be reached through the official Microchip MCP3422 product page, with an additional PDF copy available from the Octopart datasheet result. Use the manufacturer document for authoritative pin descriptions, electrical limits, conversion timing, calibration behavior, and recommended application circuits. The verified links also include a hosted PDF copy at Digi Electronics and an AllDataSheet mirror.
Where is the MCP3422A6-E/MS pinout located?
The MCP3422A6-E/MS pinout is documented in the manufacturer MCP3422 datasheet, which covers the 8-MSOP package used by the -E/MS order code. The package is confirmed by the DigiKey and LCSC listings as MSOP-8. Use the datasheet pin-description table when assigning VDD, ground, analog inputs, digital interface pins, and the exposed pad requirements rather than relying on a generic package drawing.
Where can I buy the MCP3422A6-E/MS and check current availability?
Use the Request a Quote form on this page to request the MCP3422A6-E/MS, current availability, lead time, and a volume quotation. The exact MPN appears in current distributor records for Microchip Technology, confirming it as a cataloged 8-MSOP ADC. Live stock and commercial terms can change, so a quotation request provides the appropriate route for an exact-SKU sourcing decision.
What is the price of the MCP3422A6-E/MS?
Use the Request a Quote form on this page for the current MCP3422A6-E/MS price, quantity breaks, and stock confirmation. The product is listed as an exact Microchip 18-bit, 2-input, 8-MSOP converter in multiple distribution records. Pricing can vary with order quantity, packaging, and market conditions, so the quotation form is more accurate than a static listing value.
What is the lead time for the MCP3422A6-E/MS?
The current lead time for the MCP3422A6-E/MS should be confirmed through the Request a Quote form on this page. Exact-SKU availability can vary with factory inventory and order volume, particularly when multiple quantities are required. Provide the target quantity and delivery schedule with the request so the supplier can return a binding commercial response.
Is the MCP3422A6-E/MS in stock?
Current MCP3422A6-E/MS stock status should be confirmed through the Request a Quote form on this page. Distributor records confirm that the exact orderable part is actively offered, but they do not establish a universal inventory quantity for every region or volume. The quote request can verify live factory and distribution availability for the intended quantity.
MCP3422A6-E/MS vs MCP3422A5-E/MS: which should be selected?
The MCP3422A6-E/MS should be selected when the system requires its 3.75 Hz conversion rate, while the MCP3422A5-E/MS is the same-family option for a lower-speed operating point. Both use the Microchip 8-MSOP format and belong to the MCP3422 converter family. Review the exact conversion-time and resolution tables in the manufacturer datasheet to confirm that the slower response remains acceptable.
MCP3422A6-E/MS vs MCP3422A2-E/MS: which is better for slow sensor signals?
The MCP3422A6-E/MS is the better choice when measurement latency must be minimized, because its listed conversion rate is 3.75 Hz; the MCP3422A2-E/MS belongs to a slower conversion-rate option in the same family. Both retain the differential 18-bit ADC architecture and I²C interface. The correct choice depends on the required update interval, noise performance, and whether latency or power consumption dominates.
When should I choose the MCP3422A6-E/MS over a slower MCP3422 variant?
Choose the MCP3422A6-E/MS when the application benefits from the family's faster 3.75 Hz listed conversion rate while still requiring a low-noise 18-bit measurement. It is appropriate for continuously updated temperature, pressure, and industrial process readings. Choose a slower same-family variant only when lower activity, reduced conversion frequency, or a longer acceptable update interval provides a system-level benefit.
Is the MCP3422A6-E/MS suitable for audio or high-speed waveform sampling?
No, the MCP3422A6-E/MS is not suitable for high-bandwidth audio or waveform sampling because its listed conversion rate is only 3.75 Hz. The device is optimized for high-resolution, low-frequency measurements where noise performance matters more than throughput. Use a faster ADC when the input contains significant frequency content above the converter's usable bandwidth.
What can replace the MCP3422A6-E/MS?
The closest same-footprint choices are lower-rate MCP3422A6 family variants, including MCP3422A5-E/MS, MCP3422A4-E/MS, MCP3422A3-E/MS, MCP3422A2-E/MS, and MCP3422A0-E/MS. They use the same Microchip MCP3422 package family and I²C interface, but their conversion rates differ. Verify register compatibility, acquisition timing, electrical limits, and firmware behavior before treating any variant as a functional substitute.

Data referensi engineering untuk MCP3422A6-E/MS — pembandingan, panduan desain, dan informasi konformitas.

Panduan Pemilihan

Choose the MCP3422A6-E/MS when a design needs an 18-bit, two-input differential ADC with a relatively quick 3.75 Hz listed conversion rate and an onboard 2.048 V reference. It is a strong fit for temperature, pressure, load-cell, battery, and environmental sensors whose analog values change slowly but require regular updates. The lower-rate MCP3422A5-E/MS or MCP3422A4-E/MS may be preferable when lower conversion activity and longer update intervals are acceptable. MCP3422A3-E/MS, MCP3422A2-E/MS, and MCP3422A0-E/MS remain same-footprint family choices for systems prioritizing slower measurements. Before replacement, verify the selected conversion mode, resolution, gain, acquisition timing, I²C address, calibration behavior, and firmware timing against the manufacturer datasheet.

Pembandingan dengan Alternatif

Parameter Umum Produk Ini MCP3422A5-E/MS MCP3422A4-E/MS MCP3422A3-E/MS MCP3422A2-E/MS
Brand Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology
Package 8-MSOP 8-MSOP 8-MSOP 8-MSOP 8-MSOP
Resolution 18 bits 18 bits 18 bits 18 bits 18 bits
Analog Inputs 2 differential inputs 2 differential inputs 2 differential inputs 2 differential inputs 2 differential inputs
Digital Interface I²C I²C I²C I²C I²C
Converter Architecture Delta-sigma Delta-sigma Delta-sigma Delta-sigma Delta-sigma

Diferensiator Kunci

  • Faster listed conversion rate within the same MCP3422 family (vsMCP3422A5-E/MS)
  • Two differential analog inputs with 18-bit resolution (vsMCP3422A2-E/MS)
  • Onboard precision reference simplifies standalone acquisition (vsMCP3422A3-E/MS)

Catatan Desain

Route the analog inputs, reference connection, and supply return using short paths and avoid sharing sensitive input traces with digital clock or switching-current paths. Place input filtering and protection components close to the source or connector, and terminate differential routing with matched geometry. The converter's low conversion rate reduces continuous switching activity, but the analog node still requires careful isolation from unrelated high-current circuitry.

Decouple the analog and digital supply pins at the package with the capacitance and placement specified by the manufacturer. Keep the analog and digital return paths joined at a controlled low-impedance point rather than allowing ground current from motors, relays, or switching converters to flow through the measurement reference. Verify supply ripple at the ADC pins because the device is intended for low-noise measurements.

Do not treat the MCP3422A6-E/MS as a general-purpose high-speed ADC: its listed 3.75 Hz conversion rate is suitable only for slow signals. Check common-mode voltage, differential range, gain configuration, and source impedance before connecting a sensor. Also confirm the I²C address and conversion-status behavior in firmware, because the reading is not valid merely because an I²C transaction has completed.

Informasi Konformitas

RoHS
Compliant
REACH
Unknown
AEC-Q100
Unknown
Bebas Logam Lengket
Unknown
Bebas Halogena
Unknown
Mineral Konflik
Unknown

The exact-MPN LCSC listing identifies the MCP3422A6-E/MS as RoHS compliant. No qualification detail for REACH, AEC-Q100, lead-free status, halogen-free status, or conflict-minerals compliance was established.

Pencarian Terkait

MCP3422A6-E/MS datasheet MCP3422A6-E/MS datasheet pdf MCP3422A6-E/MS pinout MCP3422A6-E/MS specifications MCP3422A6-E/MS price MCP3422A6-E/MS stock MCP3422A6-E/MS equivalent MCP3422A6-E/MS replacement MCP3422A6-E/MS vs MCP3422A5-E/MS Microchip MCP3422A6-E/MS MCP3422 18-bit ADC MCP3422 8-MSOP pinout MCP3422 pressure sensor application MCP3422 load cell circuit

Komponen dan Istilah Terkait

Microchip Technology MCP3422A6-E/MS MCP3422A5-E/MS MCP3422A4-E/MS MCP3422A3-E/MS MCP3422A2-E/MS MCP3422A0-E/MS MCP3422 ADC delta-sigma ADC analog-to-digital converter 18-bit resolution differential input I²C onboard voltage reference 2.048 V reference 3.75 Hz conversion rate MSOP-8 surface mount pressure transducer load cell temperature sensor RoHS
Kutipan Cepat RFQ
Isi detail lengkap — tim penjualan kami akan membalas dalam 24 jam
Nomor Part Manufaktur Paket QTY Harga Target Lengkap
✓
Kutipan telah disubmit!

Kami akan membalas email Anda dalam 24 jam

1
RFQ Dikirim
2
Kutipan Diterima
3
Order Ditempatkan
4
Pembayaran
5
Dikirim
6
Dikirim
Lihat Detil RFQ