MCP3422A6-E/MS - 18-Bit 2-Input ADC | Microchip Technology
부품 번호: MCP3422A6-E/MS ✓ 활성MCP3422A6-E/MS 개요
A delta-sigma ADC is a voltage-to-digital converter that samples an analog input and converts it through continuous-time integration and noise shaping before digital filtering. This architecture belongs to the ADC hierarchy and is particularly useful when low noise, high resolution, and limited conversion bandwidth are more important than rapid sampling. The MCP3422 combines these characteristics with differential analog inputs and a small package.
The MCP3422A6 provides conversion resolution up to 18 bits, two analog input channels, and an onboard reference. Its low-noise architecture is suited to precision measurements rather than waveform capture. The 3.75 Hz rate makes it appropriate for slowly changing inputs such as temperature, pressure, load-cell, and industrial process signals. Differential inputs also help reject common-mode disturbance when the source is connected appropriately.
Microchip Technology positions the MCP3422 within the MCP342X family of low-noise, high-accuracy converters. The device combines an internal reference, programmable gain, differential inputs, and an I²C digital interface in an 8-MSOP package. The resolution and low conversion rate create a favorable combination for instrumentation but make the converter unsuitable for high-bandwidth signals or audio-rate sampling.
Typical applications include precision temperature sensing, pressure transducers, load cells, battery monitoring, current measurement, environmental instrumentation, and low-frequency industrial data acquisition. The MCP3422A6 is especially useful where differential analog conditioning, an internal reference, and a compact PCB footprint reduce the number of external components.
PCB implementation should preserve a quiet analog ground path and place input, reference, and decoupling connections according to the manufacturer datasheet. Verify the selected conversion mode, data rate, gain, and I²C address in firmware because resolution and latency are coupled to the operating mode.
This product record combines the manufacturer device description with distributor package, voltage, conversion-rate, and RoHS information. It also organizes same-family drop-in options and engineering guidance around the MCP3422A6-E/MS for faster component selection and board-level planning.
드롭인 대체품: MCP3422A6-E/MS — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: MCP3422A6-E/MS (동일 폼 팩터 및 풋프린트) — 차이점: Package, Resolution, Differential Input Range, Conversion Rate, Input Architecture.
MCP3422A5-E/MS
✅ 드롭인가격 문의
데이터시트 보기 →MCP3422A4-E/MS
✅ 드롭인 ⚠️ 사양 미검증가격 문의
데이터시트 보기 →MCP3422A3-E/MS
✅ 드롭인가격 문의
데이터시트 보기 →MCP3422A2-E/MS
✅ 드롭인가격 문의
데이터시트 보기 →MCP3422A0-E/MS
✅ 드롭인가격 문의
데이터시트 보기 →MCP3422A6-E/MS 최대 정격 & 전기적 특성
| 분해능 | 18 bits |
| Analog Input Channels | 2 inputs |
| Input Architecture | Differential |
| Converter Architecture | Delta-sigma (ΣΔ) |
| Conversion Rate | 3.75 Hz |
| Supply Voltage Range | 2.7 V to 5.5 V |
| Internal Reference Voltage | 2.048 V |
| Differential Input Range | ±2.048 V |
| Digital Interface | I²C |
| 패키지 | 8-MSOP |
| 핀 수 | 8 pins |
| 실장 유형 | Surface mount |
| RoHS 상태 | Compliant |
| Integrated Reference | Yes |
MCP3422A6-E/MS 8-msop 핀 구성 가이드
MCP3422A6-E/MS(8-msop 패키지)의 핀 구성입니다. 이 아날로그 부품에는 입력, 출력, 전원 공급 핀이 있습니다. 오프셋 널, 보상, 인에이블 핀 구성은 제조사 데이터시트를 참조하십시오. 신호 컨디셔닝 및 증폭기 회로에 이상적입니다.
다음에 대한 상세 핀아웃 데이터 없음: MCP3422A6-E/MS.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
MCP3422A6-E/MS 적합 용도: 6 애플리케이션s: Precision Temperature Measurement, Industrial Pressure Transducers, Load-Cell and Force Sensing, Battery and Current Monitoring, Environmental Data Acquisition, Low-Frequency Process Instrumentation.
Precision Temperature Measurement
The MCP3422A6-E/MS fits temperature systems that use resistive sensors with slow, low-level changes. Its 18-bit resolution preserves fine measurement detail, while the 3.75 Hz listed conversion rate supports regular updates without the demand of high-speed sampling. Differential inputs can accept the bridge output when common-mode and noise conditions are controlled, and the onboard 2.048 V reference simplifies standalone acquisition. Firmware should reject out-of-range codes, apply sensor linearization, and check the conversion status before reporting temperature.
추천
Industrial Pressure Transducers
The MCP3422A6-E/MS is appropriate for industrial pressure and level signals that change more slowly than the converter's 3.75 Hz listed rate. Its differential input architecture suits bridge-based or differentially referenced transmitters, while 18-bit resolution supports fine readings over a controlled input range. The internal 2.048 V reference helps establish a stable measurement baseline. Designers should isolate transducer wiring from motor and switching noise, use suitable protection near field terminals, and confirm the transmitter's output range before applying gain.
추천
Load-Cell and Force Sensing
The MCP3422A6-E/MS can acquire slowly varying force or weight information from a load-cell bridge when the excitation, common-mode voltage, and output polarity satisfy its analog input limits. The 18-bit conversion resolution supports fine resolution across a scaled bridge output, and differential inputs help reject shared interference on the bridge lines. The 3.75 Hz conversion rate is appropriate for static weighing and force monitoring rather than dynamic impact testing. Calibration should account for bridge sensitivity, offset, gain error, and temperature drift.
추천
Battery and Current Monitoring
The MCP3422A6-E/MS can support slow battery-voltage or current measurements in energy-monitoring equipment when the converter is operated within its 2.7 V to 5.5 V supply range. The 18-bit resolution can capture small changes in a conditioned current or voltage signal, while differential inputs offer flexibility when the sensing element develops voltage across a shunt. The low update rate matches energy accumulators and supervisory loops. Firmware should perform calibration, detect open or shorted sensing paths, and synchronize measurements with the load state.
추천
Environmental Data Acquisition
The MCP3422A6-E/MS is useful for environmental monitoring systems that repeatedly measure humidity, gas, or ambient-pressure sensors with slow-moving analog outputs. Its low-noise 18-bit architecture preserves small sensor changes, and the 3.75 Hz listed conversion rate provides periodic updates suitable for environmental logging. The internal reference and compact 8-MSOP footprint simplify multi-channel monitoring boards. Each sensor may require different excitation or filtering, so the analog conditioning network and channel multiplexing strategy should be designed around the source impedance and required update schedule.
추천
Low-Frequency Process Instrumentation
The MCP3422A6-E/MS fits process instrumentation that records controlled analog variables such as tank level, valve position, or remote sensor current. The device's differential inputs, 18-bit resolution, and 3.75 Hz listed rate support accurate periodic readings, while I²C simplifies connection to a controller. A typical implementation places protection and filtering ahead of the ADC, uses a quiet reference path, and calibrates the full measurement chain. Update latency should be checked against process-control timing, and channel switching must allow the converter to settle before reading results.
추천
추천 제품 요약
엔지니어링 참조 데이터: MCP3422A6-E/MS — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | MCP3422A5-E/MS | MCP3422A4-E/MS | MCP3422A3-E/MS | MCP3422A2-E/MS |
|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 8-MSOP | 8-MSOP | 8-MSOP | 8-MSOP | 8-MSOP |
| Resolution | 18 bits | 18 bits | 18 bits | 18 bits | 18 bits |
| Analog Inputs | 2 differential inputs | 2 differential inputs | 2 differential inputs | 2 differential inputs | 2 differential inputs |
| Digital Interface | I²C | I²C | I²C | I²C | I²C |
| Converter Architecture | Delta-sigma | Delta-sigma | Delta-sigma | Delta-sigma | Delta-sigma |
주요 차별점
- Faster listed conversion rate within the same MCP3422 family (vs MCP3422A5-E/MS)
- Two differential analog inputs with 18-bit resolution (vs MCP3422A2-E/MS)
- Onboard precision reference simplifies standalone acquisition (vs MCP3422A3-E/MS)
설계 노트
Route the analog inputs, reference connection, and supply return using short paths and avoid sharing sensitive input traces with digital clock or switching-current paths. Place input filtering and protection components close to the source or connector, and terminate differential routing with matched geometry. The converter's low conversion rate reduces continuous switching activity, but the analog node still requires careful isolation from unrelated high-current circuitry.
Decouple the analog and digital supply pins at the package with the capacitance and placement specified by the manufacturer. Keep the analog and digital return paths joined at a controlled low-impedance point rather than allowing ground current from motors, relays, or switching converters to flow through the measurement reference. Verify supply ripple at the ADC pins because the device is intended for low-noise measurements.
Do not treat the MCP3422A6-E/MS as a general-purpose high-speed ADC: its listed 3.75 Hz conversion rate is suitable only for slow signals. Check common-mode voltage, differential range, gain configuration, and source impedance before connecting a sensor. Also confirm the I²C address and conversion-status behavior in firmware, because the reading is not valid merely because an I²C transaction has completed.
규정 준수 정보
The exact-MPN LCSC listing identifies the MCP3422A6-E/MS as RoHS compliant. No qualification detail for REACH, AEC-Q100, lead-free status, halogen-free status, or conflict-minerals compliance was established.