Microchip Technology

MCP3426A5-E/SN - 16-Bit Dual-Channel Delta-Sigma ADC | Microchip

MPN: MCP3426A5-E/SN ✓ Aktif
2.048 V Vdss 8-SOIC, 3.90 mm width Package
MOQ: 1 |

MCP3426A5-E/SN Ringkasan

The Microchip Technology MCP3426A5-E/SN is a 16-bit, dual-channel delta-sigma analog-to-digital converter with differential inputs, a 15 SPS conversion rate, and an 8-pin SOIC package. Its integrated 2.048 V precision reference supports a differential input range of ±2.048 V, while the two-channel architecture supports simultaneous monitoring of two analog signals through a multiplexed front end.

A delta-sigma ADC is a voltage regulator–independent type of analog-to-digital converter that uses continuous-time sampling, noise shaping, and digital filtering to provide high-resolution results from low-resolution internal converters. Its hierarchy includes ADC > data converter > analog mixed-signal IC. This architecture is especially useful when low noise, narrow-resolution requirements, and simple I2C integration matter more than very high conversion throughput.

The MCP3426 family provides differential inputs, programmable gain, factory-programmed I2C addresses, and resolution up to 16 bits. The MCP3426A5-E/SN is identified specifically as a 15 SPS, dual-channel device with a sigma-delta architecture and PGA. Its integrated 2.048 V reference removes the need for an external precision reference when the full-scale input remains within the specified differential range.

Its delta-sigma conversion approach prioritizes noise rejection and resolution rather than rapid sampling. The onboard reference establishes a stable conversion scale, while the PGA allows the analog input to be conditioned before conversion. Because the device uses differential inputs, common-mode noise can be reduced when the signal source and return path are balanced correctly, although the input arrangement still requires careful attention to source impedance and grounding.

Typical uses include industrial process measurement, current monitoring, bridge-sensor interfaces, laboratory instrumentation, portable instrumentation, and low-frequency acquisition systems. Two channels are useful when a design must compare a sensor signal with another analog quantity or measure differential inputs across multiple multiplexed sources. For battery-powered equipment, the low-rate conversion capability supports controlled acquisition cycles, but system-level sleep strategy and reference behavior must be evaluated during power-budget calculations.

PCB implementation should keep the analog input traces short, route them away from switching nodes and high-current paths, and provide a quiet ground return. Input filtering and source settling must be coordinated with the selected conversion rate. Firmware should also read the factory-programmed I2C address associated with the A5 device variant rather than assuming the address used by another MCP3426A-series member.

This page combines the manufacturer device description, verified package and converter details, replacement guidance, and practical interface-design considerations. It helps engineers distinguish protocol-compatible variants, plan acquisition firmware, and assess whether the MCP3426A5-E/SN matches a precision, low-speed measurement design.

Alternatif penggantian untuk MCP3426A5-E/SN — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.

Variasi di dalam seri ini

Model-series yang sama yang kompatibel dengan penggantian MCP3426A5-E/SN (sama faktor bentuk dan footprint) — berbeda di dalam Package, Differential Input Range, Conversion Rate, Operating Temperature Range, Resolution.

Microchip Technology
Package: 8-pin SOIC
Differential Input Range: -2.048 V to +2.048 V
Conversion Rate: 15 samples per second
Microchip Technology
Package: 8-pin SOIC, 0.154 in (3.90 mm) wide
Differential Input Range: ±2.048 V differential
Conversion Rate: 15 samples/s
Microchip Technology
Package: 8-pin SOIC, 3.90 mm body width
Operating Temperature Range: -40°C to +125°C
Resolution: Up to 16 bits

MCP3426A1-E/SN

✅ Drop-In
Microchip Technology
📦 8-SOIC
Delta-sigma ADC · Up to 16 bits · 2 · Differential · 15 samples/s · 2.048 V · ±2.048 V differential · 2.7 V to 5.5 V

Kontak untuk harga

Lihat Datasheet →

MCP3426A2-E/SN

✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan
Microchip Technology
📦 8-SOIC
Up to 16 bits · 2 channels · Differential inputs · 16-bit delta-sigma ADC · 15 SPS · 2.048 V · ±2.048 V · 2.7 V to 5.5 V

Kontak untuk harga

Lihat Datasheet →

MCP3426A3-E/SN

✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan
📦 8-SOIC
100% match on 16-bit resolution, 2 channels, and 15 SPS conversion rate; only the factory-programmed I2C address code differs

📋 Alternatif referensi (tidak dalam katalog)

MCP3426A4-E/SN

✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan
Microchip Technology
📦 8-SOIC
Sigma-delta · 16 bit · 2 channels · 240 samples/s · 15 samples/s · 2.048 V · ±2.048 V · 2.7 V to 5.5 V

Kontak untuk harga

Lihat Datasheet →

MCP3426A5T-E/SN

✅ Drop-In
📦 8-SOIC
100% match on 16-bit resolution, 2 channels, and 15 SPS conversion rate; ordering-code and qualification differences require final datasheet review

📋 Alternatif referensi (tidak dalam katalog)

MCP3426A5-E/SN Rating Maksimal & Karakteristik Listrik

ADC Type Sigma-delta ADC
Resolusi 16 bit
Number of Channels 2 channels
Number of ADCs 1 ADC
Input Type Differential
Conversion Rate 15 SPS
Internal Reference Voltage 2.048 V
Differential Input Range ±2.048 V
Programmable Gain Amplifier Available
Digital Interface I2C
I2C Address Factory programmed for the A5 variant
Paket 8-SOIC, 3.90 mm width
Jumlah Pin 8 pins
Tipe Mounting Surface mount
Rentang Suhu Kerja -40 °C to +125 °C

MCP3426A5-E/SN 8-soic, 3.90 mm width Diamant Konfigurasi Panduan

Konfigurasi pin untuk MCP3426A5-E/SN (8-soic, 3.90 mm width pakai pakai). Komponen analog ini memiliki pin masukan, keluaran, dan pengirim daya. Lihat datasheet produsen untuk konfigurasi pin offset null, kompensasi, dan pengaktifan. Ideal untuk peralatan sinyal dan kabel penggandaran.

Diamant diagram pakai pakai 8-soic, 3.90 mm width untuk MCP3426A5-E/SN

Tidak ada data diatribut pin yang tersedia untuk MCP3426A5-E/SN.

Lihat ke: datasheet produk untuk konfigurasi pin penuh.

Aplikasi Umum

MCP3426A5-E/SN cocok untuk 6 aplikasis: Industrial Process Measurement, Current Shunt Measurement, Bridge Sensor Interface, Portable Instrumentation, Laboratory Measurement Equipment, Environmental Monitoring.

🏭

Industrial Process Measurement

The MCP3426A5-E/SN fits low-speed industrial process monitoring because it combines a 16-bit converter, two differential input channels, and a 15 SPS conversion rate. The integrated 2.048 V reference establishes a stable conversion range of ±2.048 V, while the PGA can bring lower-level sensor outputs into that span. A controller can read process pressure, temperature, or level through I2C while rejecting common-mode noise in a balanced differential input arrangement. The design should include protected sensor wiring, input filtering, and a ground-return strategy that avoids switching-node currents.

⚡

Current Shunt Measurement

The MCP3426A5-E/SN is suitable for measuring a differential voltage across a current shunt when the signal remains within the converter's usable input range. Differential inputs help separate the small shunt voltage from common-mode noise, while 16-bit resolution supports precise current monitoring and power calculations. The 15 SPS rate is appropriate for average power, battery-current, or actuator-current measurements rather than instantaneous waveform capture. Firmware should configure the PGA and sample averaging to balance resolution, conversion time, and input settling time.

🖥️

Bridge Sensor Interface

The MCP3426A5-E/SN can serve as the low-noise ADC stage for a resistive bridge sensor such as a strain gauge, pressure bridge, or load cell. Its differential inputs accommodate the small bridge imbalance signal more effectively than a single-ended input would, while the programmable gain stage reduces the need for a separate analog amplifier. The integrated 2.048 V reference and 16-bit resolution support precise ratio-based measurements. Because the converter rate is only 15 SPS, the system should use controlled excitation and settling periods rather than assume continuous real-time sampling.

📱

Portable Instrumentation

The MCP3426A5-E/SN fits portable measurement instruments that record slowly changing analog values and value low noise and simple digital integration. Its two differential channels allow one instrument to monitor a primary sensor and a secondary reference quantity, while the I2C interface keeps the connection to a controller compact. The 15 SPS rate supports data logging, calibration checks, and periodic sampling without the storage and bandwidth requirements of a fast converter. Power-conscious designs should account for analog-section activation time and allow the source and input network to settle before each conversion.

🔧

Laboratory Measurement Equipment

The MCP3426A5-E/SN is applicable to laboratory instruments that prioritize 16-bit resolution and low-noise differential measurement over rapid sampling. It can acquire one or two slow inputs, such as sensor outputs, reference levels, or control voltages, and transfer each result over I2C. The onboard precision 2.048 V reference simplifies calibration when the measurement range is compatible with the ±2.048 V differential span. For bench equipment, isolate the analog section from digital return currents and validate the input filter against the 15 SPS conversion timing to avoid settling-related errors.

🧩

Environmental Monitoring

The MCP3426A5-E/SN can support environmental monitoring systems that measure slow temperature, humidity, pressure, or gas-sensor outputs. Two differential channels are useful when one channel carries the sensor measurement and the other monitors a reference or baseline signal. A 15 SPS conversion rate provides frequent updates for thermal and environmental trends without excessive control-loop traffic. The sensor's output must remain within the converter's common-mode and differential limits, and protection or conditioning may be required for long external sensor wiring, condensation, or electrostatic exposure.

What is the MCP3426A5-E/SN?
The MCP3426A5-E/SN is a 16-bit, dual-channel, differential-input sigma-delta ADC from Microchip Technology with a conversion rate of 15 SPS and an 8-pin SOIC package. According to the Microchip MCP3426 product page, the device includes an onboard precision 2.048 V reference, a programmable gain amplifier, and an I2C interface for low-noise measurement systems.
What is the input voltage range of the MCP3426A5-E/SN?
The MCP3426A5-E/SN supports a differential input range of ±2.048 V when its integrated reference is used. According to the Microchip MCP3426 product page, the precision 2.048 V reference establishes the converter scale, while the PGA allows smaller differential signals to be amplified before conversion. The exact PGA gain steps and usable common-mode limits should be confirmed in the manufacturer datasheet.
How fast does the MCP3426A5-E/SN convert analog signals?
The MCP3426A5-E/SN performs up to 15 conversions per second. According to the Microchip MCP3426 product description, it is a delta-sigma converter designed for high-resolution, low-noise measurement rather than high-speed waveform capture. This rate is appropriate for slowly changing process, temperature, pressure, and current measurements where 16-bit resolution is more valuable than millisecond-scale acquisition.
Where can I download the MCP3426A5-E/SN datasheet PDF?
The MCP3426A5-E/SN datasheet and family documentation are available through the official Microchip MCP3426 product page at https://www.microchip.com/en-us/product/MCP3426. Use the documents or programming specifications linked there for the electrical characteristics, register map, I2C address, pin descriptions, and application-circuit recommendations.
Where can I find the MCP3426A5-E/SN pinout?
The MCP3426A5-E/SN uses an 8-pin SOIC, and its authoritative pin assignments are shown in the pin-description table in the Microchip MCP3426 documentation. The two analog channels, I2C interface, supply pins, and ground connections must be assigned exactly as shown. Use the package drawing and pin table together when laying out a board.
What is the difference between MCP3426A5-E/SN and MCP3426A1-E/SN?
The MCP3426A5-E/SN and MCP3426A1-E/SN share the 16-bit, dual-channel, differential-input MCP3426 architecture, but their factory-programmed I2C addresses differ. According to the Microchip family information, the address is encoded in the lowest three bits. Both use an 8-SOIC package, although changing between address variants requires corresponding firmware changes.
What can replace the MCP3426A5-E/SN on the same 8-SOIC footprint?
MCP3426A1-E/SN and MCP3426A2-E/SN through MCP3426A5T-E/SN are same-family, pin-compatible alternatives in the 8-SOIC footprint. Their primary practical difference is the factory-programmed I2C address, so firmware must use the address associated with the actual fitted device. No verified cross-brand, pin-to-pin equivalent was identified.
When should I choose MCP3426A5-E/SN over MCP3426A1-E/SN?
Choose the MCP3426A5-E/SN when its specific factory-programmed I2C address best fits the board topology or channel planning, particularly when multiple MCP3426 devices must coexist on one I2C bus. Because both variants retain the 16-bit, dual-channel, differential-input architecture, selection should be based on address availability, availability, and software configuration rather than converter resolution.
Is MCP3426A5-E/SN suitable for industrial sensor measurement?
The MCP3426A5-E/SN is suitable for low-speed industrial measurements requiring 16-bit resolution, differential inputs, and an integrated 2.048 V reference. Its 15 SPS conversion rate suits temperature, pressure, strain, and current signals that change slowly. Industrial signal conditioning should also provide suitable common-mode range, filtering, isolation where required, and protection from transients.
Does the MCP3426A5-E/SN need an external voltage reference?
No external reference is required for the converter's standard differential range because the MCP3426 includes an onboard precision 2.048 V reference. According to the Microchip product page, this reference enables measurements across a ±2.048 V differential range. If the design requires a different full-scale range or independent reference calibration, the input network and gain configuration must be redesigned accordingly.
What is the best cross-brand equivalent for MCP3426A5-E/SN?
No verified cross-brand, pin-to-pin MCP3426A5-E/SN equivalent was identified. The defensible drop-in choices are Microchip's own 8-SOIC MCP3426A1-E/SN through MCP3426A5 family variants, which retain the converter architecture but use different factory-programmed I2C addresses. A different manufacturer's ADC should be treated as a redesign unless its pinout, electrical limits, reference behavior, and firmware match are independently verified.
Is MCP3426A5-E/SN in stock and what is its lead time?
Current stock, production allocation, and lead time should be requested through the Request a Quote form on this page. The MCP3426A5-E/SN is offered as an 8-SOIC surface-mount device, and its order configuration includes the -E temperature grade and /SN package suffix. The quote team can confirm current availability, quantity breaks, and manufacturing lead time for the exact MPN.
Where can I buy MCP3426A5-E/SN online?
Use the Request a Quote form on this page to request MCP3426A5-E/SN availability, volume pricing, and lead time for the exact 8-SOIC ordering code. Providing the full MPN, MCP3426A5-E/SN, helps prevent substitution with another A-series address option. The confirmed quote also provides a procurement record for the exact device and package suffix.
What is the price of MCP3426A5-E/SN?
Current pricing for MCP3426A5-E/SN is obtained through the Request a Quote form on this page. The quoted commercial offer reflects the exact MPN, 8-SOIC package code, order quantity, and requested delivery schedule. This approach avoids stale catalog pricing and confirms whether available inventory or factory allocation will be used.
What are the key specifications of MCP3426A5-E/SN that engineers should know?
The MCP3426A5-E/SN combines a 16-bit resolution, two differential input channels, a 15 SPS conversion rate, an integrated precision 2.048 V reference, programmable gain, and an I2C interface in an 8-SOIC package. According to the Microchip MCP3426 product page, these characteristics position the device for low-noise, high-resolution acquisition rather than high-speed signal sampling.
Can MCP3426A5T-E/SN replace MCP3426A5-E/SN?
MCP3426A5T-E/SN is a pin-compatible 8-SOIC member of the same MCP3426A5 family and is the closest same-brand replacement identified. The exact ordering-code and automotive-related differences must be checked against the manufacturer's full ordering information before production use. Firmware should also confirm the factory-programmed I2C address and verify that all electrical limits match the original design.

Data referensi engineering untuk MCP3426A5-E/SN — pembandingan, panduan desain, dan informasi konformitas.

Panduan Pemilihan

Choose MCP3426A5-E/SN when the design requires a 16-bit, dual-channel, differential-input ADC with a 15 SPS conversion rate, integrated 2.048 V reference, and I2C interface in an 8-SOIC package. It is strongest for temperature, pressure, current-shunt, bridge-sensor, and environmental measurements where signal bandwidth is low but resolution and common-mode rejection are important. The other MCP3426A-series members are primarily address-code alternatives: select MCP3426A1-E/SN through MCP3426A4-E/SN when those specific factory-programmed I2C addresses simplify the bus layout, and update firmware accordingly. MCP3426A5T-E/SN is useful when its ordering-code or qualification characteristics better fit the production requirement, subject to final manufacturer-document review. None of these same-family choices increases conversion speed or resolution; they preserve the core MCP3426 architecture. A different manufacturer's converter should be considered only after verifying pinout, reference accuracy, PGA behavior, noise, common-mode limits, and I2C firmware compatibility.

Pembandingan dengan Alternatif

Parameter Umum Produk Ini MCP3426A1-E/SN MCP3426A2-E/SN MCP3426A3-E/SN MCP3426A4-E/SN MCP3426A5T-E/SN
Package 8-SOIC 8-SOIC 8-SOIC 8-SOIC 8-SOIC 8-SOIC
Brand Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology
ADC Architecture Sigma-delta Sigma-delta Sigma-delta Sigma-delta Sigma-delta Sigma-delta
Resolution 16 bit 16 bit 16 bit 16 bit 16 bit 16 bit
Number of Channels 2 channels 2 channels 2 channels 2 channels 2 channels 2 channels
Conversion Rate 15 SPS 15 SPS 15 SPS 15 SPS 15 SPS 15 SPS
Input Type Differential Differential Differential Differential Differential Differential
Internal Reference 2.048 V precision reference 2.048 V precision reference 2.048 V precision reference 2.048 V precision reference 2.048 V precision reference 2.048 V precision reference
Interface I2C I2C I2C I2C I2C I2C

Diferensiator Kunci

  • Two-channel differential measurement in one converter (vsMCP3426A1-E/SN)
  • Integrated precision reference simplifies fixed-range acquisition (vsMCP3426A2-E/SN)
  • Low-speed high-resolution conversion suited to sensor monitoring (vsMCP3426A3-E/SN)
  • Factory-programmed address supports structured multi-device bus planning (vsMCP3426A4-E/SN)

Catatan Desain

Route the two differential input pairs as compact, symmetric traces and provide a direct analog-ground return for each source. Keep the inputs away from switching inductors, relay contacts, motor phases, and high-current output paths. Because the converter measures small differential signals, even a few millivolts of ground offset or coupled switching noise can affect the result. A quiet analog-ground partition and careful return-current control are more important than simply shortening every trace.

Coordinate the source impedance, anti-alias filter, and the 15 SPS conversion timing. The input network must settle between channel selections and conversions, particularly when switching between two sources with different impedances. Use the manufacturer's recommended input-capacitance and filter guidance, and validate the filter cutoff against the converter bandwidth rather than assuming that a larger capacitor always improves accuracy.

Do not substitute an MCP3426A1-E/SN through MCP3426A4-E/SN without updating the I2C address used by firmware. The variants share the 8-SOIC footprint and converter configuration, but the factory-programmed address distinguishes them on the bus. First confirm the device marking and order code, then scan or communicate using the correct address. Also verify the -E and /SN ordering-code requirements against the production BOM.

Separate analog supply routing from noisy digital and switching loads, and place the required bypass capacitance close to the device's supply pins. The MCP3426A5-E/SN combines a precision internal reference with two differential channels, so supply and ground disturbances can affect both channels. Avoid routing return current beneath the analog inputs and keep regulator switching loops confined to the power section rather than the measurement area.

Informasi Konformitas

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Bebas Logam Lengket
Unknown
Bebas Halogena
Unknown
Mineral Konflik
Unknown

Compliance declarations were not stated in the verified product records. The -E ordering suffix denotes an extended-temperature configuration, but it must not be interpreted as an AEC-Q100 qualification statement without an explicit manufacturer declaration.

Pencarian Terkait

MCP3426A5-E/SN datasheet MCP3426A5-E/SN pinout MCP3426A5-E/SN specifications MCP3426A5-E/SN price MCP3426A5-E/SN stock MCP3426A5-E/SN replacement MCP3426A5-E/SN equivalent MCP3426A5-E/SN cross reference MCP3426A5-E/SN vs MCP3426A1-E/SN MCP3426 16-bit dual-channel ADC MCP3426A5 8-SOIC application circuit Microchip MCP3426A5-E/SN

Komponen dan Istilah Terkait

Microchip Technology MCP3426A5-E/SN MCP3426A1-E/SN MCP3426A2-E/SN MCP3426A3-E/SN MCP3426A4-E/SN MCP3426A5T-E/SN ADC analog-to-digital converter delta-sigma ADC data converter analog mixed-signal IC differential input programmable gain amplifier PGA precision voltage reference 2.048 V reference I2C factory-programmed I2C address 8-SOIC SOIC package family surface-mount package 16-bit resolution 15 SPS conversion rate industrial process measurement
Kutipan Cepat RFQ
Isi detail lengkap — tim penjualan kami akan membalas dalam 24 jam
Nomor Part Manufaktur Paket QTY Harga Target Lengkap
✓
Kutipan telah disubmit!

Kami akan membalas email Anda dalam 24 jam

1
RFQ Dikirim
2
Kutipan Diterima
3
Order Ditempatkan
4
Pembayaran
5
Dikirim
6
Dikirim
Lihat Detil RFQ