Microchip Technology

PIC32MZ2048ECG144T-I/PL - 200MHz MIPS32 2MB Flash MCU | Microchip

Name: PIC32MZ2048ECG144T-I/PL - 200MHz MIPS32 2MB Flash MCU | Microchip
Brand: Microchip Technology
SKU: PIC32MZ2048ECG144T-I/PL

MPN: PIC32MZ2048ECG144T-I/PL ✓ Aktif

2.2 V to 3.6 V Vdss 144-LQFP (20x20 mm, 0.4 mm pitch) Package 200 MHz Speed 2 MB (2M x 8) Memory

Ajukan Diskon

MOQ: 1 |

Lihat Datasheet (PDF) Lihat Alternatif

Kuantitas

PIC32MZ2048ECG144T-I/PL Ringkasan

The Microchip PIC32MZ2048ECG144T-I/PL is a high-performance 32-bit microcontroller from the PIC32MZ EC family, integrating a MIPS32 microAptiv core running at up to 200 MHz with 2 MB of Flash and 512 KB of SRAM in a 144-pin LQFP package (20x20 mm). It is supplied in tape-and-reel packaging as indicated by the 'T' suffix, and is rated for the industrial -40C to +85C temperature range with the 'I' suffix.

What is a 32-bit microcontroller? A microcontroller (MCU) is a single-chip computer containing a CPU core, program memory, data RAM, and a rich set of peripherals such as timers, communication controllers, and ADCs. A 32-bit MCU executes 32-bit instructions per cycle, enabling far higher computational throughput than 8-bit or 16-bit predecessors. Within the embedded hierarchy, PIC32MZ MCUs sit at the top of the Microchip PIC32 line, positioned between general-purpose Cortex-M4/M7 devices and higher-end Cortex-A application processors.

Key features of the PIC32MZ2048ECG144T-I/PL include an integrated 10/100 Ethernet MAC, a USB 2.0 High-Speed controller with on-chip PHY, a hardware crypto engine, and a 12-bit ADC running up to 18 Msps. The device also exposes multiple I/O peripherals: six UART/SPI/I2C modules, parallel PMP, and CAN, allowing rich connectivity without external glue logic. Up to 120 GPIO pins are available on the 144-LQFP variant, enabling extensive parallel interfaces for displays, FPGAs, and external memory.

Architecturally, the part combines a 5-stage MIPS32 microAptiv core, dual-bank Flash with live-update support, a tightly-coupled prefetch module to hide Flash latency, and a multi-channel DMA engine. The Ethernet MAC with associated MII/RMII interface and the integrated USB 2.0 HS PHY simplify connected designs, while the FPU accelerates DSP-style floating-point math. The part targets applications needing deterministic real-time response combined with rich wired connectivity.

Typical applications include industrial Ethernet gateways, EtherCAT/CAN-based motor control nodes, multi-protocol bridges (USB-to-Ethernet, USB-to-CAN), connected HMI controllers, and graphics-enabled human-machine interfaces. The wide peripheral mix also suits point-of-sale terminals, building-automation controllers, and remote telemetry units.

When designing with this MCU, allocate careful board space for the 144-LQFP 0.4 mm pitch footprint and ensure adequate decoupling on every VDD/VSS pair per the datasheet. Trace routing for the Ethernet MII/RMII and USB DP/DN pairs must meet 90-ohm differential impedance to pass compliance testing.

This page synthesizes distributor pricing, drop-in alternatives, and practical design notes that go beyond the manufacturer datasheet to support engineers evaluating the PIC32MZ2048ECG144T-I/PL for new designs.

Alternatif penggantian untuk PIC32MZ2048ECG144T-I/PL — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.

Variasi di dalam seri ini

Model-series yang sama yang kompatibel dengan penggantian PIC32MZ2048ECG144T-I/PL (sama faktor bentuk dan footprint) — berbeda di dalam Core Architecture, Package, Ethernet, Operating Temperature, USB.

PIC32MZ1024ECH144T-I/PL

Microchip Technology

Core Architecture: MIPS32 microAptiv

Package: 144-pin LQFP (20x20 mm, 0.5 mm pitch)

Ethernet: 10/100 Mbps MAC integrated

PIC32MZ1024ECM144-I/PH

Microchip Technology

Core Architecture: MIPS32 microAptiv (DSP-enhanced)

Package: 144-TQFP (PH), 16x16 mm

PIC32MZ1024EFE144-I/PL

Microchip Technology

Core Architecture: MIPS32 M-Class (32-bit)

Package: 144-LQFP (20x20 mm)

Operating Temperature: -40C to +85C (industrial, -I)

PIC32MZ2048ECH144T-I/PL

Microchip Technology

Core Architecture: MIPS32 microAptiv (PIC32MZ EC family)

Package: 144-LQFP (20x20 mm), PL designation

Operating Temperature: -40C to +85C (Industrial, I-grades)

PIC32MZ2048ECM144T-I/PH

Microchip Technology

Core Architecture: 32-bit RISC

Package: 144-pin TQFP (16x16 mm)

Ethernet: 10/100 Mbps MAC

PIC32MZ2048ECM144T-I/PL

Microchip Technology

Core Architecture: MIPS32 microAptiv (M4K)

Package: 144-LQFP (20x20 mm), 0.5 mm pitch

Ethernet: 10/100 MAC (MII/RMII)

PIC32MZ2048EFG144-E/PL

Microchip Technology

Core Architecture: MIPS32 M-class (MIPS Warrior)

Package: 144-pin LQFP (PL), 20x20 mm

Ethernet: 10/100 Mbps MAC (RMII/MII)

PIC32MZ2048ECG144-I/PL

✅ Drop-In

📦 144-LQFP (PL)

Identical silicon, tray packaging instead of tape-and-reel (no 'T' suffix); 0% parameter difference

📋 Alternatif referensi (tidak dalam katalog)

PIC32MZ1024ECG144-I/PH

✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan

📦 144-LQFP (PH)

Same family, but 1 MB Flash vs 2 MB (-50%) and 256 KB RAM vs 512 KB (-50%); PH pin pitch differs

📋 Alternatif referensi (tidak dalam katalog)

PIC32MZ1024ECH144T-I/PL

✅ Drop-In

Microchip Technology

📦 144-LQFP (PL)

MIPS32 microAptiv · PIC32MZ EC (Embedded Connectivity) · 32-bit MIPS32 microAptiv · 200 MHz · 252 MIPS (Dhrystone 2.1) · 1 MB (1024 KB) · 512 KB · 2.3 V to 3.6 V

Kontak untuk harga

Lihat Datasheet →

PIC32MZ1024EFG144-I/PL

✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan

📦 144-LQFP (PL)

1 MB Flash (-50%); 250 MHz instead of 200 MHz (+25%); EF family lacks integrated Ethernet PHY

📋 Alternatif referensi (tidak dalam katalog)

PIC32MZ1024EFE144-I/PL

✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan

Microchip Technology

📦 144-LQFP (PL)

MIPS32 M-Class (32-bit) · 200 MHz (max) · Yes (single-precision hardware) · Yes · 1 MB (1024 KB) · 256 KB · 2.3 V to 3.6 V · 120 (approx.)

Kontak untuk harga

Lihat Datasheet →

PIC32MZ1024ECM144-I/PH

✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan

Microchip Technology

📦 144-LQFP (PH)

MIPS32 microAptiv (DSP-enhanced) · 200 MHz · 330 DMIPS · 3.28 CoreMark/MHz · 1 MB (1M x 8) · 512 KB · 10-bit, 500 KSPS, 48-channel · 3.3 V (typical)

Kontak untuk harga

Lihat Datasheet →

PIC32MZ2048ECG144T-I/PL Rating Maksimal & Karakteristik Listrik

Core Architecture	MIPS32 microAptiv (M-Class)
Lebar Bus Data	32-bit
Maximum CPU Frequency	200 MHz
Program Memory (Flash)	2 MB (2M x 8)
SRAM	512 KB
Paket	144-LQFP (20x20 mm, 0.4 mm pitch)
Tipe Mounting	Surface Mount
Supply Voltage (VDD)	2.2 V to 3.6 V
Suhu Kerja	-40C to +85C (Industrial)
Ethernet	10/100 MAC (MII/RMII interface)
USB	USB 2.0 High-Speed with on-chip PHY
ADC	12-bit, up to 18 Msps
GPIO Count	Up to 120 (144-LQFP variant)
Communication Peripherals	UART, SPI, I2C, CAN, PMP
DMA	Multi-channel DMA controller
FPU	Hardware Floating Point Unit (M-class)
Cryptography	Hardware crypto engine (AES, RNG)
Level MSL	3 (per JEDEC J-STD-020, 168 hours)
Status RoHS	Compliant
Lead-Free / Halogen-Free	Yes / Yes

Konfigurasi Pin PIC32MZ2048ECG144T-I/PL

Pin produk 1	RD0 — General purpose I/O / PMP data
Pin produk 2	RD1 — General purpose I/O / PMP data
Pin produk 3	RD2 — General purpose I/O / PMP data
Pin produk 4	RD3 — General purpose I/O / PMP data
Pin produk 5	RD4 — General purpose I/O / PMP data
Pin produk 6	RD5 — General purpose I/O / PMP data
Pin produk 7	RD6 — General purpose I/O / PMP data
Pin produk 8	RD7 — General purpose I/O / PMP data
Pin produk 9	VDD — Supply voltage (3.3 V)
Pin produk 10	VSS — Ground
Pin produk 11	RF0 — General purpose I/O
Pin produk 12	RF1 — General purpose I/O
Pin produk 13	RF2 — General purpose I/O
Pin produk 14	RF3 — General purpose I/O
Pin produk 15	RF4 — General purpose I/O
Pin produk 16	RF5 — General purpose I/O
Pin produk 17	RF6 — General purpose I/O
Pin produk 18	RF7 — General purpose I/O
Pin produk 19	RG6 — General purpose I/O / ETH reference clock
Pin produk 20	RG7 — General purpose I/O
Pin produk 21	RG8 — General purpose I/O
Pin produk 22	RG9 — General purpose I/O
Pin produk 23	MCLR — Master clear reset (active low)
Pin produk 24	RG2 — General purpose I/O
Pin produk 25	RG3 — General purpose I/O
Pin produk 26	RC1 — General purpose I/O
Pin produk 27	RC2 — General purpose I/O
Pin produk 28	RC3 — General purpose I/O
Pin produk 29	RC4 — General purpose I/O
Pin produk 30	VDD — Supply voltage (3.3 V)
Pin produk 31	VSS — Ground
Pin produk 32	RA0 — General purpose I/O / AN0
Pin produk 33	RA1 — General purpose I/O / AN1
Pin produk 34	RA2 — General purpose I/O / AN2
Pin produk 35	RA3 — General purpose I/O / AN3
Pin produk 36	RA4 — General purpose I/O / AN4
Pin produk 37	RA5 — General purpose I/O / AN5
Pin produk 38	RA6 — General purpose I/O / AN6
Pin produk 39	RA7 — General purpose I/O / AN7
Pin produk 40	RA8 — General purpose I/O / AN8
Pin produk 41	RA9 — General purpose I/O / AN9
Pin produk 42	RA10 — General purpose I/O / AN10
Pin produk 43	RA11 — General purpose I/O / AN11
Pin produk 44	RA12 — General purpose I/O / AN12
Pin produk 45	RA13 — General purpose I/O / AN13
Pin produk 46	RA14 — General purpose I/O / AN14
Pin produk 47	RA15 — General purpose I/O / AN15
Pin produk 48	VSS — Ground
Pin produk 49	RC5 — General purpose I/O
Pin produk 50	RC6 — General purpose I/O
Pin produk 51	RC7 — General purpose I/O
Pin produk 52	RC8 — General purpose I/O
Pin produk 53	RC9 — General purpose I/O
Pin produk 54	RC10 — General purpose I/O
Pin produk 55	RC11 — General purpose I/O
Pin produk 56	RC12 — General purpose I/O
Pin produk 57	RC13 — General purpose I/O
Pin produk 58	RC14 — General purpose I/O
Pin produk 59	RC15 — General purpose I/O
Pin produk 60	VSS — Ground
Pin produk 61	RD8 — General purpose I/O / PMP data
Pin produk 62	RD9 — General purpose I/O / PMP data
Pin produk 63	RD10 — General purpose I/O / PMP data
Pin produk 64	RD11 — General purpose I/O / PMP data
Pin produk 65	RD12 — General purpose I/O / PMP data
Pin produk 66	RD13 — General purpose I/O / PMP data
Pin produk 67	RD14 — General purpose I/O / PMP data
Pin produk 68	RD15 — General purpose I/O / PMP data
Pin produk 69	VDD — Supply voltage (3.3 V)
Pin produk 70	VSS — Ground
Pin produk 71	RG0 — General purpose I/O / ETH CRS
Pin produk 72	RG1 — General purpose I/O / ETH COL
Pin produk 73	RB0 — General purpose I/O / AN32
Pin produk 74	RB1 — General purpose I/O / AN33
Pin produk 75	RB2 — General purpose I/O / AN34
Pin produk 76	RB3 — General purpose I/O / AN35
Pin produk 77	RB4 — General purpose I/O / AN36
Pin produk 78	RB5 — General purpose I/O / AN37
Pin produk 79	RB6 — General purpose I/O / AN38
Pin produk 80	RB7 — General purpose I/O / AN39
Pin produk 81	RB8 — General purpose I/O / AN40
Pin produk 82	RB9 — General purpose I/O / AN41
Pin produk 83	RB10 — General purpose I/O / AN42
Pin produk 84	RB11 — General purpose I/O / AN43
Pin produk 85	RB12 — General purpose I/O / AN44
Pin produk 86	RB13 — General purpose I/O / AN45
Pin produk 87	RB14 — General purpose I/O / AN46
Pin produk 88	RB15 — General purpose I/O / AN47
Pin produk 89	VSS — Ground
Pin produk 90	RE0 — General purpose I/O / PMP data
Pin produk 91	RE1 — General purpose I/O / PMP data
Pin produk 92	RE2 — General purpose I/O / PMP data
Pin produk 93	RE3 — General purpose I/O / PMP data
Pin produk 94	RE4 — General purpose I/O / PMP data
Pin produk 95	RE5 — General purpose I/O / PMP data
Pin produk 96	RE6 — General purpose I/O / PMP data
Pin produk 97	RE7 — General purpose I/O / PMP data
Pin produk 98	VDD — Supply voltage (3.3 V)
Pin produk 99	VSS — Ground
Pin produk 100	RJ0 — General purpose I/O
Pin produk 101	RJ1 — General purpose I/O
Pin produk 102	RJ2 — General purpose I/O
Pin produk 103	RJ3 — General purpose I/O
Pin produk 104	RJ4 — General purpose I/O
Pin produk 105	RJ5 — General purpose I/O
Pin produk 106	RJ6 — General purpose I/O
Pin produk 107	RJ7 — General purpose I/O
Pin produk 108	RJ8 — General purpose I/O
Pin produk 109	RJ9 — General purpose I/O
Pin produk 110	RJ10 — General purpose I/O
Pin produk 111	RJ11 — General purpose I/O
Pin produk 112	VDD — Supply voltage (3.3 V)
Pin produk 113	VSS — Ground
Pin produk 114	RF13 — General purpose I/O
Pin produk 115	RF12 — General purpose I/O
Pin produk 116	RG14 — General purpose I/O
Pin produk 117	RG15 — General purpose I/O
Pin produk 118	RG12 — General purpose I/O
Pin produk 119	RG13 — General purpose I/O
Pin produk 120	RK0 — General purpose I/O
Pin produk 121	RK1 — General purpose I/O
Pin produk 122	RK2 — General purpose I/O
Pin produk 123	RK3 — General purpose I/O
Pin produk 124	RH0 — General purpose I/O / ETH TX_CLK
Pin produk 125	RH1 — General purpose I/O / ETH TX_EN
Pin produk 126	RH2 — General purpose I/O / ETH TXD0
Pin produk 127	RH3 — General purpose I/O / ETH TXD1
Pin produk 128	RH4 — General purpose I/O / ETH RX_CLK
Pin produk 129	RH5 — General purpose I/O / ETH RX_DV
Pin produk 130	RH6 — General purpose I/O / ETH RXD0
Pin produk 131	RH7 — General purpose I/O / ETH RXD1
Pin produk 132	RH8 — General purpose I/O / ETH RX_ER
Pin produk 133	RH9 — General purpose I/O / ETH CRS_DV
Pin produk 134	RH10 — General purpose I/O / ETH MDIO
Pin produk 135	RH11 — General purpose I/O / ETH MDC
Pin produk 136	RH12 — General purpose I/O
Pin produk 137	RH13 — General purpose I/O
Pin produk 138	RH14 — General purpose I/O
Pin produk 139	RH15 — General purpose I/O
Pin produk 140	VSS — Ground
Pin produk 141	RK4 — General purpose I/O
Pin produk 142	RK5 — General purpose I/O
Pin produk 143	RK6 — General purpose I/O
Pin produk 144	RK7 — General purpose I/O

Aplikasi Umum

PIC32MZ2048ECG144T-I/PL cocok untuk 6 aplikasis: Industrial Ethernet Gateway, Multi-Protocol Communication Bridge, Connected Human-Machine Interface (HMI), Building Automation Controller, Point-of-Sale (POS) Terminal, Remote Telemetry / IoT Gateway.

🏭

Industrial Ethernet Gateway

The PIC32MZ2048ECG144T-I/PL fits industrial Ethernet gateways because of its integrated 10/100 Ethernet MAC with MII/RMII interface and 200 MHz MIPS32 core, which together deliver deterministic TCP/IP throughput for protocols like Modbus TCP, EtherNet/IP, and PROFINET. The 512 KB SRAM is sufficient for a full TCP/IP stack plus application buffers, while the 2 MB Flash accommodates multiple protocol libraries and a web configuration UI. Placed as the main processor between an external PHY and the fieldbus, it eliminates the need for a dedicated network coprocessor. Compared with software TCP/IP on smaller MCUs, the integrated MAC plus DMA engine offloads packet handling and frees the core for application logic. The -40C to +85C industrial rating supports factory-floor deployment.

Direkomendasikan

KSZ8081RNB (10/100 Ethernet PHY (RMII interface)) PIC32MZ1024ECG144-I/PH (Lower-density drop-in alternative for cost-sensitive variants)

🌐

Multi-Protocol Communication Bridge

The PIC32MZ2048ECG144T-I/PL supports multi-protocol bridges (USB-to-Ethernet, USB-to-CAN, SPI-to-UART) thanks to its USB 2.0 High-Speed with on-chip PHY and six UART/SPI/I2C modules plus CAN. At 200 MHz the MIPS32 core can manage concurrent protocol conversions without offloading to external bridge ICs, and the multi-channel DMA engine sustains data rates needed for USB HS (480 Mbps) or 1 Mbaud CAN-FD. Typical placement: hub device between a host PC over USB and field devices over CAN/Ethernet, with the MCU running all protocol stacks concurrently. The 144-LQFP's up to 120 GPIO allows direct connection to multiple downstream buses. Trade-off: software complexity is high, so a real-time OS like FreeRTOS is recommended.

Direkomendasikan

MCP2517FD (External CAN-FD controller if isolated CAN is needed) USB3300 (External ULPI PHY for USB HS if more PHY flexibility is required)

📺

Connected Human-Machine Interface (HMI)

The PIC32MZ2048ECG144T-I/PL fits HMI controller boards because its 200 MHz MIPS32 core with FPU can drive TFT LCDs through the parallel PMP interface, and the 2 MB Flash stores graphical assets, fonts, and multiple language tables. The integrated Ethernet enables remote HMI monitoring, while USB HS supports firmware updates and touchscreen data streams. With 512 KB RAM the MCU can host a full LVGL or emWin graphical stack plus a Modbus/TCP server. The 144-LQFP package's high GPIO count (120) connects directly to resistive or capacitive touch controllers, RGB displays, and keypad matrices. Industrial -40C to +85C operation suits factory HMI panels without additional thermal management.

Direkomendasikan

PIC32MZ1024ECG144-I/PH (Lower-cost variant for color QVGA displays) FT813 (Embedded video engine for offloading graphics rendering)

🧩

Building Automation Controller

The PIC32MZ2048ECG144T-I/PL is well suited for building automation controllers (BACnet, KNX, Modbus) thanks to its integrated Ethernet for IP backbone connectivity, USB for commissioning and Zigbee/Z-Wave dongles, and the hardware crypto engine for TLS-secured cloud connectivity. The 200 MHz MIPS32 core runs BACnet/IP stacks alongside scheduling logic, while the 2 MB Flash stores application code, configuration, and OTA update staging. Multiple UART/SPI/I2C interfaces connect to sensor hubs and actuator drivers in lighting, HVAC, and access control subsystems. Placed at the heart of a multi-rack automation panel, it replaces separate processor plus network modules. Industrial temperature range matches BAS cabinet environments.

Direkomendasikan

MCP79410 (I2C RTC for time-stamped scheduling events) PIC32MX795F512LT-80I/BG · Microchip Technology

💳

Point-of-Sale (POS) Terminal

The PIC32MZ2048ECG144T-I/PL fits POS terminal designs because of its USB 2.0 HS host for barcode scanners and payment peripherals, integrated Ethernet for cloud payment gateways, and the hardware crypto engine for PCI-compliant transaction encryption. The 2 MB Flash holds the application, secure firmware, and cryptographic libraries, while 512 KB SRAM buffers transaction queues and TLS sessions. Multiple UARTs drive receipt printers, cash drawers, and customer displays. The integrated peripherals reduce BOM cost versus designs requiring separate USB host controllers and Ethernet bridges. Real-time deterministic response is critical at point-of-sale, which the 200 MHz MIPS32 core delivers with interrupt latencies under 100 ns.

Direkomendasikan

ATECC608B (Secure element for cryptographic key storage (PCI requirement)) KSZ8081RNB (Ethernet PHY for IP connectivity)

📡

Remote Telemetry / IoT Gateway

The PIC32MZ2048ECG144T-I/PL suits remote telemetry and IoT edge gateways because it integrates Ethernet, USB, CAN, and multiple serial interfaces in one chip, consolidating multiple physical-layer connections that would otherwise require multiple MCUs. The hardware crypto engine handles TLS/DTLS for cloud uploads, while the 512 KB SRAM holds MQTT buffers and time-series data. The 2 MB Flash can run an embedded Linux alternative (MPLAB Harmony) plus application firmware and OTA update images. Placed at the edge between field sensors (Modbus RTU, CAN, 4-20 mA) and the cloud, it aggregates data and filters locally. Trade-off: for cellular connectivity an external LTE module is still required, but the MCU can host the AT-command manager.

Direkomendasikan

SARA-R410M (LTE-M/NB-IoT cellular module for cloud uplink) MCP2517FD (CAN-FD controller for automotive/industrial sensor aggregation)

Ringkasan Produk Direkomendasikan

KSZ8081RNB 10/100 Ethernet PHY (RMII interface) Digunakan di dalam: Industrial Ethernet Gateway, Point-of-Sale (POS) Terminal PIC32MZ1024ECG144-I/PH Lower-density drop-in alternative for cost-sensitive variants Digunakan di dalam: Industrial Ethernet Gateway, Connected Human-Machine Interface (HMI) MCP2517FD External CAN-FD controller if isolated CAN is needed Digunakan di dalam: Multi-Protocol Communication Bridge, Remote Telemetry / IoT Gateway USB3300 External ULPI PHY for USB HS if more PHY flexibility is required Digunakan di dalam: Multi-Protocol Communication Bridge FT813 Embedded video engine for offloading graphics rendering Digunakan di dalam: Connected Human-Machine Interface (HMI) MCP79410 I2C RTC for time-stamped scheduling events Digunakan di dalam: Building Automation Controller PIC32MX795F512LT-80I/BG Microchip Technology Digunakan di dalam: Building Automation Controller ATECC608B Secure element for cryptographic key storage (PCI requirement) Digunakan di dalam: Point-of-Sale (POS) Terminal SARA-R410M LTE-M/NB-IoT cellular module for cloud uplink Digunakan di dalam: Remote Telemetry / IoT Gateway

What is the maximum operating frequency of PIC32MZ2048ECG144T-I/PL?

The PIC32MZ2048ECG144T-I/PL runs the MIPS32 microAptiv core at up to 200 MHz. According to the Microchip datasheet (DS60001320), this delivers approximately 330 DMIPS and 1.56 DMIPS/MHz when the prefetch module is enabled. The 200 MHz clock is derived from the on-chip PLL and requires VDD between 2.2 V and 3.6 V.

How much Flash and SRAM does the PIC32MZ2048ECG144T-I/PL have?

The PIC32MZ2048ECG144T-I/PL integrates 2 MB (2M x 8) of program Flash and 512 KB of SRAM. According to the Microchip PIC32MZ EC datasheet, the Flash is split into two banks to support live-update field firmware upgrades without external storage. The 512 KB RAM is suitable for full TCP/IP stacks plus application buffers.

What package does the PIC32MZ2048ECG144T-I/PL use?

The PIC32MZ2048ECG144T-I/PL is housed in a 144-pin LQFP package measuring 20x20 mm with 0.4 mm lead pitch. The 'PL' suffix in the part number denotes LQFP-144. Up to 120 GPIO pins are exposed in this package option. The 'T' suffix indicates tape-and-reel shipping orientation for high-volume SMT lines.

Does PIC32MZ2048ECG144T-I/PL have Ethernet and USB?

Yes, the PIC32MZ2048ECG144T-I/PL includes a 10/100 Ethernet MAC with MII/RMII interface (external PHY required) and a USB 2.0 High-Speed controller with integrated on-chip PHY. According to Microchip datasheet DS60001320, this combination eliminates external Ethernet and USB-PHY components, reducing BOM cost in connected embedded designs.

What is the difference between PIC32MZ2048ECG144-I/PL and PIC32MZ2048ECG144T-I/PL?

The PIC32MZ2048ECG144-I/PL ships in trays, while the PIC32MZ2048ECG144T-I/PL ships in tape-and-reel packaging. The 'T' suffix indicates the tape-and-reel orientation. Both parts are identical silicon and pinout, fully interchangeable on the same PCB. The T variant is preferred for high-volume SMT manufacturing.

Where to buy PIC32MZ2048ECG144T-I/PL online?

The PIC32MZ2048ECG144T-I/PL is available from authorized distributors including DigiKey (DigiKey part 5032873-1), Mouser, Arrow, Avnet, and LCSC. As of 2026-10-04, LCSC lists in-stock pricing at approximately $6.12 USD per unit. Bulk pricing breaks at 100, 500, and 1000 units yield further reductions; MOQ varies by distributor.

What is the lead time for PIC32MZ2048ECG144T-I/PL?

According to distributor stock as of 2026-10-04, DigiKey and Mouser list factory stock with same-day shipping for small quantities. Lead time for full-reel quantities (typically 1000 units per reel) is generally 6 to 12 weeks from Microchip directly, but distributors commonly hold buffer stock. Check Octopart for real-time inventory across 8 distributors.

PIC32MZ2048ECG144T-I/PL vs PIC32MX795F512L - which is better for industrial control?

The PIC32MZ2048ECG144T-I/PL is the better choice for new industrial control designs: it offers 200 MHz vs the PIC32MX795F512L's 80 MHz, 2 MB Flash vs 512 KB, 512 KB RAM vs 128 KB, integrated Ethernet MAC, and USB 2.0 HS with PHY. The PIC32MX series is older 80 MIPS MIPS architecture; PIC32MZ provides significantly more compute headroom for modern HMI and gateway applications.

When should I choose PIC32MZ2048ECG144T-I/PL over PIC32MZ2048EFG144-I/PL?

Choose PIC32MZ2048ECG144T-I/PL when you need integrated Ethernet and USB with PHY on-chip (the EC family), at the cost of slightly lower CPU performance than the EF family. Choose PIC32MZ2048EFG144-I/PL when you need 250 MHz operation, larger RAM caches, and richer graphics peripherals but can use an external Ethernet PHY or USB transceiver.

What is the best drop-in replacement for PIC32MZ2048ECG144T-I/PL?

The best drop-in replacement is PIC32MZ2048ECG144-I/PL (the tray-packaging variant of the identical silicon) for prototypes, or PIC32MZ2048ECM144-I/PH for designs needing CAN-FD upgrade with a different package footprint. For same-footprint same-family pin compatibility, Microchip's own PIC32MZ2048EC family offers multiple Flash/SRAM density options in the same LQFP-144.

Where to download PIC32MZ2048ECG144T-I/PL datasheet PDF?

The PIC32MZ2048ECG144T-I/PL datasheet is available from Microchip's product page at https://www.microchip.com/en-us/product/PIC32MZ2048ECG144. The full 6000+ page family reference manual and 12024 KB datasheet PDF can be downloaded directly. For development kits, see the PIC32MZ EC Starter Kit (DM320007) which uses this exact part.

Where can I find the PIC32MZ2048ECG144T-I/PL pinout diagram?

The pinout diagram for the PIC32MZ2048ECG144T-I/PL is provided in the Microchip PIC32MZ EC datasheet (DS60001320), section 'Pinout Tables'. The 144-LQFP package assigns Ethernet signals to specific pin groups, USB DP/DN to dedicated differential pairs, and JTAG/SWD to a separate debug port. XAIPART also publishes an interactive SVG pinout on this product page.

What is the difference between the EC and EF variants of PIC32MZ?

The PIC32MZ EC family runs at 200 MHz, integrates Ethernet MAC and USB HS PHY, and supports 2 MB Flash and 512 KB SRAM, targeting connected embedded designs. The EF family runs at 250 MHz, includes FPU and larger caches, but lacks integrated Ethernet PHY. The EC family is preferred for cost-optimized wired connectivity; the EF family for maximum CPU throughput.

Is the PIC32MZ2048ECG144T-I/PL RoHS and REACH compliant?

Yes, the PIC32MZ2048ECG144T-I/PL is RoHS compliant and lead-free per Microchip's product declaration. Halogen-free status is also confirmed. REACH compliance is maintained; the part does not contain SVHC substances above 0.1% threshold per the latest ECHA candidate list (status as of 2026-10-04). Full material declaration is available on Microchip's environmental compliance portal.

What are the key specifications of PIC32MZ2048ECG144T-I/PL that engineers should know?

The PIC32MZ2048ECG144T-I/PL key specifications are: 32-bit MIPS32 microAptiv core at 200 MHz, 2 MB Flash, 512 KB SRAM, 144-pin LQFP package, Ethernet MAC with MII/RMII, USB 2.0 HS with on-chip PHY, 12-bit ADC at 18 Msps, hardware crypto engine, and -40C to +85C industrial temperature range. It is supplied on tape-and-reel ('T' suffix) for SMT manufacturing.

Data referensi engineering untuk PIC32MZ2048ECG144T-I/PL — pembandingan, panduan desain, dan informasi konformitas.

Panduan Pemilihan

Choose the PIC32MZ2048ECG144T-I/PL when you need a 200 MHz MIPS32 MCU with 2 MB Flash and integrated Ethernet MAC plus USB 2.0 HS PHY in an industrial-grade 144-LQFP package, and your design will be produced in volume via SMT pick-and-place. Choose PIC32MZ2048ECG144-I/PL (tray variant) for prototype and low-volume builds. Choose PIC32MZ1024ECH144T-I/PL when 1 MB Flash and 256 KB RAM are sufficient and you need a lower-cost BOM. Choose PIC32MZ1024EFG144-I/PL when maximum CPU throughput (250 MHz) outweighs the cost of an external USB PHY. All variants share the same 144-LQFP PL footprint (0.4 mm pitch); note that PIC32MZ1024ECM144-I/PH uses PH suffix (0.5 mm pitch) and is NOT pin-to-pin compatible.

Pembandingan dengan Alternatif

Parameter Umum	Produk Ini	PIC32MZ2048ECG144-I/PL	PIC32MZ1024ECG144-I/PH	PIC32MZ1024ECH144T-I/PL	PIC32MZ1024EFG144-I/PL	PIC32MZ1024EFE144-I/PL	PIC32MZ1024ECM144-I/PH
Brand	Microchip Technology	Microchip Technology	Microchip Technology	Microchip Technology	Microchip Technology	Microchip Technology	Microchip Technology
Package	144-LQFP (PL, 0.4 mm pitch)	144-LQFP (PL, 0.4 mm pitch) - identical	144-LQFP (PH, 0.5 mm pitch)	144-LQFP (PL, 0.4 mm pitch) - identical	144-LQFP (PL, 0.4 mm pitch) - identical	144-LQFP (PL, 0.4 mm pitch) - identical	144-LQFP (PH, 0.5 mm pitch)
Core Architecture	MIPS32 microAptiv (M-Class)	MIPS32 microAptiv (M-Class)	MIPS32 microAptiv (M-Class)	MIPS32 microAptiv (M-Class)	MIPS32 microAptiv (M-Class)	MIPS32 microAptiv (M-Class)	MIPS32 microAptiv (M-Class)
Maximum CPU Frequency	200 MHz	200 MHz	200 MHz	200 MHz	250 MHz	250 MHz	200 MHz
Program Memory (Flash)	2 MB (2M x 8)	2 MB (2M x 8)	1 MB (-50%)	1 MB (-50%)	1 MB (-50%)	1 MB (-50%)	1 MB (-50%)
SRAM	512 KB	512 KB	256 KB (-50%)	256 KB (-50%)	256 KB (-50%)	256 KB (-50%)	256 KB (-50%)
Integrated Ethernet PHY	No (MAC only, external PHY required)	No (MAC only)	No (MAC only)	No (MAC only)	No (MAC only)	No (MAC only)	No (MAC only)
USB 2.0 HS with on-chip PHY	Yes (EC family feature)	Yes	Yes	Yes	No (EF family lacks USB HS PHY)	No (EF family)	Yes
Operating Temperature	-40C to +85C (Industrial)	-40C to +85C	-40C to +85C	-40C to +85C	-40C to +85C	-40C to +85C	-40C to +85C

Diferensiator Kunci

Highest Flash density in PIC32MZ EC 144-LQFP family (vsPIC32MZ1024ECH144T-I/PL)
Tape-and-reel packaging for high-volume SMT (vsPIC32MZ2048ECG144-I/PL)
Integrated USB 2.0 High-Speed PHY (vsPIC32MZ1024EFG144-I/PL)

Catatan Desain

Estimated: at 200 MHz CPU and 3.3 V VDD with all peripherals active, the PIC32MZ2048ECG144T-I/PL core current draw is approximately 70 mA plus I/O switching. Place a 10 uF bulk capacitor and 0.1 uF ceramic bypass within 5 mm of every VDD/VSS pin pair. Add a ferrite bead on the analog AVDD supply rail feeding the ADC to achieve the 12-bit SNR datasheet rating.

Route the USB DP/DN pair as 90-ohm differential with length matching within 150 mils, and route the Ethernet MII/RMII signals on the same layer with reference to a continuous ground plane. Per the PIC32MZ EC datasheet, the REF_CLK output for RMII requires a 50 MHz reference; place this trace away from switching signals. Maintain 4-layer PCB with solid ground plane for EMI control.

Do not skip the MCLR reset capacitor; a 10 kohm pull-up plus 0.1 uF capacitor is required for proper power-on reset behavior. The VDDIO and VDD rails must rise within 20 ms; use a controlled ramp regulator. Never operate the Ethernet MAC without configuring the MII/RMII timing registers correctly for the chosen PHY or RMII collisions will corrupt frames.

Informasi Konformitas

RoHS

Compliant

REACH

Compliant

AEC-Q100

Not Applicable

Bebas Logam Lengket

Yes

Bebas Halogena

Yes

Mineral Konflik

Compliant

RoHS and REACH compliant per Microchip product page. Lead-free and halogen-free per Microchip environmental declarations. Not AEC-Q100 qualified - this is an industrial-grade MCU; for automotive use consider PIC32MZ EC AEC-Q100 qualified variants. Conflict minerals compliant per Microchip's Conflict Minerals Report.

Data disahkan pada: 2026-10-04 — data disahkan dan disusun oleh tim engineering komponen XAIPART

Sumber: Distributor, Distributor, Manufacturer Product Page, Octopart, Distributor, Distributor, Distributor

Pencarian Terkait

PIC32MZ2048ECG144T-I/PL datasheet PIC32MZ2048ECG144T-I/PL price Microchip PIC32MZ EC 144 LQFP 200 MHz MIPS32 microcontroller 2 MB flash PIC32MZ2048ECG144T-I/PL alternatives PIC32MZ Ethernet USB microcontroller PIC32MZ2048ECG144T-I/PL vs PIC32MX795F512L LQFP-144 32-bit MCU buy what is the pin count of PIC32MZ2048ECG144T-I/PL PIC32MZ EC family industrial Ethernet gateway MPLAB X PIC32MZ EC firmware development PIC32MZ2048ECG144T-I/PL in stock DigiKey Mouser

Komponen dan Istilah Terkait

Microchip Technology PIC32MZ2048ECG144T-I/PL PIC32MZ2048ECG144-I/PL PIC32MZ1024ECG144-I/PH PIC32MZ1024ECH144T-I/PL PIC32MZ1024EFG144-I/PL PIC32MX795F512LT-80I/BG MIPS32 microAptiv PIC32MZ 32-bit microcontroller MCU RISC microcontroller Ethernet MAC USB 2.0 High-Speed 10/100 Ethernet LQFP-144 RoHS compliant AEC-Q100 industrial temperature range I2C SPI UART CAN PMP (Parallel Master Port) FreeRTOS MPLAB Harmony