STM32F207ZGT6 - 32-bit ARM Cortex-M3 MCU, 1MB Flash | STMicroelectronics
MPN: STM32F207ZGT6 ✓ AktifSTM32F207ZGT6 Ringkasan
A microcontroller (MCU) is a compact integrated circuit designed to govern a specific operation in an embedded system. It contains a processor core, memory (Flash and SRAM), and programmable input/output peripherals. The STM32F207ZGT6 belongs to the STM32F2 series, which is part of the broader STM32 family of 32-bit Flash microcontrollers. This family is widely used in industrial control, consumer electronics, and IoT devices due to its balance of performance, power efficiency, and peripheral integration.
Key features of the STM32F207ZGT6 include a 120 MHz ARM Cortex-M3 core with 1.25 DMIPS/MHz, 1 MB of Flash memory, 128 KB of SRAM, and a comprehensive set of peripherals: 3x 12-bit ADCs, 2x DACs, 4x USARTs, 2x UARTs, 3x SPI, 2x I2C, 2x CAN, 1x USB 2.0 OTG FS/HS, 1x Ethernet MAC, and a camera interface. It also features a flexible memory controller (FMC) for external memory expansion, a true random number generator (RNG), and a cryptographic acceleration cell for AES, DES, and 3DES.
The STM32F207ZGT6 is built on a 90nm process technology, offering a good balance between performance and power consumption. It operates from a 1.8V to 3.6V power supply and supports a wide temperature range of -40°C to +85°C. The device includes multiple low-power modes (Sleep, Stop, Standby) to optimize energy consumption in battery-powered applications.
Typical applications include industrial automation, motor control, medical devices, point-of-sale terminals, and IoT gateways. The Ethernet MAC and USB OTG support enable connectivity in networked systems, while the rich analog peripherals suit data acquisition and control loops.
When designing with this MCU, ensure proper decoupling of the power supply pins and a stable clock source. The device supports external crystal oscillators (4-26 MHz) and an internal 16 MHz RC oscillator. For high-speed USB and Ethernet, an external 25 MHz crystal is recommended. The boot pins must be configured correctly for programming via USART or USB.
Alternatif penggantian untuk STM32F207ZGT6 — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.
Variasi di dalam seri ini
Model-series yang sama yang kompatibel dengan penggantian STM32F207ZGT6 (sama faktor bentuk dan footprint) — berbeda di dalam Ethernet, Flash Memory, Operating Temperature, Supply Voltage.
STM32F207ZGT6
✅ Drop-InKontak untuk harga
Lihat Datasheet →STM32F207ZGT6TR
✅ Drop-In📋 Alternatif referensi (tidak dalam katalog)
STM32F207ZGT6
✅ Drop-InKontak untuk harga
Lihat Datasheet →STM32F207ZGT6
✅ Drop-InKontak untuk harga
Lihat Datasheet →STM32F207ZGT6
✅ Drop-InKontak untuk harga
Lihat Datasheet →STM32F207ZGT6
✅ Drop-InKontak untuk harga
Lihat Datasheet →STM32F207ZGT6
✅ Drop-InKontak untuk harga
Lihat Datasheet →STM32F207ZGT6
✅ Drop-InKontak untuk harga
Lihat Datasheet →STM32F207ZGT6
✅ Drop-InKontak untuk harga
Lihat Datasheet →STM32F207ZGT6
✅ Drop-InKontak untuk harga
Lihat Datasheet →STM32F207ZGT6
✅ Drop-InKontak untuk harga
Lihat Datasheet →STM32F207ZGT6
✅ Drop-InKontak untuk harga
Lihat Datasheet →STM32F207ZGT6
✅ Drop-InKontak untuk harga
Lihat Datasheet →STM32F207ZGT6
✅ Drop-InKontak untuk harga
Lihat Datasheet →STM32F207ZGT6
✅ Drop-InKontak untuk harga
Lihat Datasheet →STM32F207ZGT6
✅ Drop-InKontak untuk harga
Lihat Datasheet →STM32F207ZGT6
✅ Drop-InKontak untuk harga
Lihat Datasheet →STM32F207ZGT6
✅ Drop-InKontak untuk harga
Lihat Datasheet →STM32F207ZGT6
✅ Drop-InKontak untuk harga
Lihat Datasheet →STM32F207ZGT6
✅ Drop-InKontak untuk harga
Lihat Datasheet →STM32F207ZGT6 Rating Maksimal & Karakteristik Listrik
| Core | ARM Cortex-M3 |
| Max Clock Frequency | 120 MHz |
| Flash Memory | 1 MB |
| SRAM | 128 KB |
| Tegangan Pemuat | 1.8 V to 3.6 V |
| Suhu Kerja | -40C to +85C |
| Paket | LQFP144 (20x20 mm) |
| Number of I/O Pins | 114 |
| ADC | 3x 12-bit, up to 24 channels |
| DAC | 2x 12-bit |
| USART/UART | 4x USART, 2x UART |
| SPI | 3x SPI |
| I2C | 2x I2C |
| CAN | 2x CAN 2.0B |
| USB | USB 2.0 OTG FS/HS |
| Ethernet | 10/100 Ethernet MAC |
| Timers | 12x 16-bit, 2x 32-bit |
| DMA | 16-channel DMA |
| RTC | Yes |
| RoHS | Compliant |
Konfigurasi Pin STM32F207ZGT6
| Pin produk 1 | PE2 — GPIO or alternate function |
| Pin produk 2 | PE3 — GPIO or alternate function |
| Pin produk 3 | PE4 — GPIO or alternate function |
| Pin produk 4 | PE5 — GPIO or alternate function |
| Pin produk 5 | PE6 — GPIO or alternate function |
| Pin produk 6 | VBAT — Battery backup supply |
| Pin produk 7 | PC13 — GPIO or RTC output |
| Pin produk 8 | PC14 — GPIO or OSC32_IN |
| Pin produk 9 | PC15 — GPIO or OSC32_OUT |
| Pin produk 10 | PF0 — GPIO or OSC_IN |
| Pin produk 11 | PF1 — GPIO or OSC_OUT |
| Pin produk 12 | PF2 — GPIO |
| Pin produk 13 | PF3 — GPIO |
| Pin produk 14 | PF4 — GPIO |
| Pin produk 15 | PF5 — GPIO |
| Pin produk 16 | PF6 — GPIO |
| Pin produk 17 | PF7 — GPIO |
| Pin produk 18 | PF8 — GPIO |
| Pin produk 19 | PF9 — GPIO |
| Pin produk 20 | PF10 — GPIO |
| Pin produk 21 | VSS — Ground |
| Pin produk 22 | VDD — Power supply |
| Pin produk 23 | PF11 — GPIO |
| Pin produk 24 | PF12 — GPIO |
| Pin produk 25 | PF13 — GPIO |
| Pin produk 26 | PF14 — GPIO |
| Pin produk 27 | PF15 — GPIO |
| Pin produk 28 | PG0 — GPIO |
| Pin produk 29 | PG1 — GPIO |
| Pin produk 30 | PG2 — GPIO |
| Pin produk 31 | PG3 — GPIO |
| Pin produk 32 | PG4 — GPIO |
| Pin produk 33 | PG5 — GPIO |
| Pin produk 34 | PG6 — GPIO |
| Pin produk 35 | PG7 — GPIO |
| Pin produk 36 | PG8 — GPIO |
| Pin produk 37 | PG9 — GPIO |
| Pin produk 38 | PG10 — GPIO |
| Pin produk 39 | PG11 — GPIO |
| Pin produk 40 | PG12 — GPIO |
| Pin produk 41 | PG13 — GPIO |
| Pin produk 42 | PG14 — GPIO |
| Pin produk 43 | PG15 — GPIO |
| Pin produk 44 | VSS — Ground |
| Pin produk 45 | VDD — Power supply |
| Pin produk 46 | PD0 — GPIO or OSC_IN |
| Pin produk 47 | PD1 — GPIO or OSC_OUT |
| Pin produk 48 | PD2 — GPIO |
| Pin produk 49 | PD3 — GPIO |
| Pin produk 50 | PD4 — GPIO |
| Pin produk 51 | PD5 — GPIO |
| Pin produk 52 | PD6 — GPIO |
| Pin produk 53 | PD7 — GPIO |
| Pin produk 54 | PD8 — GPIO |
| Pin produk 55 | PD9 — GPIO |
| Pin produk 56 | PD10 — GPIO |
| Pin produk 57 | PD11 — GPIO |
| Pin produk 58 | PD12 — GPIO |
| Pin produk 59 | PD13 — GPIO |
| Pin produk 60 | PD14 — GPIO |
| Pin produk 61 | PD15 — GPIO |
| Pin produk 62 | PC0 — GPIO or ADC input |
| Pin produk 63 | PC1 — GPIO or ADC input |
| Pin produk 64 | PC2 — GPIO or ADC input |
| Pin produk 65 | PC3 — GPIO or ADC input |
| Pin produk 66 | VSSA — Analog ground |
| Pin produk 67 | VDDA — Analog power supply |
| Pin produk 68 | PC4 — GPIO or ADC input |
| Pin produk 69 | PC5 — GPIO or ADC input |
| Pin produk 70 | PB0 — GPIO or ADC input |
| Pin produk 71 | PB1 — GPIO or ADC input |
| Pin produk 72 | PB2 — GPIO |
| Pin produk 73 | PB3 — GPIO or JTDO |
| Pin produk 74 | PB4 — GPIO or NJTRST |
| Pin produk 75 | PB5 — GPIO |
| Pin produk 76 | PB6 — GPIO or I2C1_SCL |
| Pin produk 77 | PB7 — GPIO or I2C1_SDA |
| Pin produk 78 | BOOT0 — Boot mode selection |
| Pin produk 79 | PB8 — GPIO or I2C1_SCL |
| Pin produk 80 | PB9 — GPIO or I2C1_SDA |
| Pin produk 81 | PE0 — GPIO |
| Pin produk 82 | PE1 — GPIO |
| Pin produk 83 | VSS — Ground |
| Pin produk 84 | VDD — Power supply |
| Pin produk 85 | PE7 — GPIO |
| Pin produk 86 | PE8 — GPIO |
| Pin produk 87 | PE9 — GPIO |
| Pin produk 88 | PE10 — GPIO |
| Pin produk 89 | PE11 — GPIO |
| Pin produk 90 | PE12 — GPIO |
| Pin produk 91 | PE13 — GPIO |
| Pin produk 92 | PE14 — GPIO |
| Pin produk 93 | PE15 — GPIO |
| Pin produk 94 | PB10 — GPIO or I2C2_SCL |
| Pin produk 95 | PB11 — GPIO or I2C2_SDA |
| Pin produk 96 | PB12 — GPIO or SPI2_NSS |
| Pin produk 97 | PB13 — GPIO or SPI2_SCK |
| Pin produk 98 | PB14 — GPIO or SPI2_MISO |
| Pin produk 99 | PB15 — GPIO or SPI2_MOSI |
| Pin produk 100 | PD8 — GPIO or USART3_TX |
| Pin produk 101 | PD9 — GPIO or USART3_RX |
| Pin produk 102 | PD10 — GPIO or USART3_CK |
| Pin produk 103 | PD11 — GPIO or USART3_CTS |
| Pin produk 104 | PD12 — GPIO or USART3_RTS |
| Pin produk 105 | PD13 — GPIO |
| Pin produk 106 | PD14 — GPIO |
| Pin produk 107 | PD15 — GPIO |
| Pin produk 108 | PC6 — GPIO or I2S2_MCK |
| Pin produk 109 | PC7 — GPIO or I2S2_SCK |
| Pin produk 110 | PC8 — GPIO or I2S2_SD |
| Pin produk 111 | PC9 — GPIO or I2S2_WS |
| Pin produk 112 | PA0 — GPIO or ADC input |
| Pin produk 113 | PA1 — GPIO or ADC input |
| Pin produk 114 | PA2 — GPIO or ADC input |
| Pin produk 115 | PA3 — GPIO or ADC input |
| Pin produk 116 | VSS — Ground |
| Pin produk 117 | VDD — Power supply |
| Pin produk 118 | PA4 — GPIO or DAC_OUT1 |
| Pin produk 119 | PA5 — GPIO or DAC_OUT2 |
| Pin produk 120 | PA6 — GPIO |
| Pin produk 121 | PA7 — GPIO |
| Pin produk 122 | PA8 — GPIO |
| Pin produk 123 | PA9 — GPIO or USART1_TX |
| Pin produk 124 | PA10 — GPIO or USART1_RX |
| Pin produk 125 | PA11 — GPIO or USB_DM |
| Pin produk 126 | PA12 — GPIO or USB_DP |
| Pin produk 127 | PA13 — GPIO or JTMS/SWDIO |
| Pin produk 128 | PA14 — GPIO or JTCK/SWCLK |
| Pin produk 129 | PA15 — GPIO or JTDI |
| Pin produk 130 | PC10 — GPIO |
| Pin produk 131 | PC11 — GPIO |
| Pin produk 132 | PC12 — GPIO |
| Pin produk 133 | PD0 — GPIO or OSC_IN |
| Pin produk 134 | PD1 — GPIO or OSC_OUT |
| Pin produk 135 | PD2 — GPIO |
| Pin produk 136 | PD3 — GPIO |
| Pin produk 137 | PD4 — GPIO |
| Pin produk 138 | PD5 — GPIO |
| Pin produk 139 | PD6 — GPIO |
| Pin produk 140 | PD7 — GPIO |
| Pin produk 141 | VSS — Ground |
| Pin produk 142 | VDD — Power supply |
| Pin produk 143 | PB12 — GPIO or SPI2_NSS |
| Pin produk 144 | PB13 — GPIO or SPI2_SCK |
Aplikasi Umum
STM32F207ZGT6 cocok untuk 6 aplikasis: Industrial Automation, IoT Gateway, Motor Control, Medical Devices, Point-of-Sale (POS) Terminals, Audio Processing.
Industrial Automation
The STM32F207ZGT6 is ideal for industrial automation due to its 120 MHz Cortex-M3 core, rich communication interfaces (CAN, UART, SPI, I2C), and advanced timers for PWM generation. It can handle real-time control loops, motor control, and PLC I/O modules. The device's 1 MB Flash allows storing complex control algorithms and communication stacks. Its wide operating temperature range (-40°C to +85°C) ensures reliability in harsh industrial environments. The Ethernet MAC enables connectivity to industrial networks like EtherCAT or PROFINET when paired with an external PHY. The multiple ADCs and DACs facilitate analog signal acquisition and generation for process control.
Direkomendasikan
IoT Gateway
The STM32F207ZGT6 serves as a powerful IoT gateway MCU, connecting sensors and devices to the cloud. Its Ethernet MAC and USB OTG support wired and wireless connectivity (via external modules). The 1 MB Flash and 128 KB SRAM can run TCP/IP stacks (lwIP), MQTT, and TLS. The device's low-power modes help reduce energy consumption in always-on gateways. The multiple UARTs and SPI interfaces allow connection to various sensors and radio modules (e.g., Wi-Fi, LoRa). The cryptographic acceleration cell (AES, DES, 3DES) enhances security for data transmission. The RTC enables time-stamping of sensor data.
Direkomendasikan
Motor Control
The STM32F207ZGT6 is well-suited for motor control applications, including BLDC, PMSM, and stepper motors. Its advanced timers (TIM1, TIM8) generate high-resolution PWM signals with dead-time insertion, essential for driving power stages. The 12-bit ADCs sample motor currents and voltages for FOC (Field-Oriented Control) algorithms. The 120 MHz core provides sufficient computational power for real-time control loops. The device's multiple communication interfaces (CAN, UART) enable integration with motor drives and industrial networks. The DMA controller offloads data transfer, reducing CPU load. The device's robust design and wide temperature range make it suitable for industrial motor drives.
Direkomendasikan
Medical Devices
The STM32F207ZGT6 is used in medical devices such as patient monitors, infusion pumps, and diagnostic equipment. Its high processing power and rich analog peripherals (ADCs, DACs) enable precise signal acquisition and control. The device's 1 MB Flash allows storing complex algorithms for signal processing and user interfaces. The multiple communication interfaces (USB, UART, SPI) facilitate data transfer to host systems. The device's low-power modes are beneficial for battery-powered portable medical devices. The cryptographic acceleration cell can secure patient data. The device's reliability and long-term availability make it suitable for medical applications.
Direkomendasikan
Point-of-Sale (POS) Terminals
The STM32F207ZGT6 is ideal for POS terminals, providing the processing power and connectivity needed for payment transactions. Its Ethernet MAC and USB OTG support wired and wireless connectivity to payment networks. The device's 1 MB Flash can store payment application code and encryption keys. The cryptographic acceleration cell (AES, DES, 3DES) ensures secure transactions. The multiple UARTs and SPI interfaces connect to card readers, PIN pads, and displays. The device's rich peripheral set and 114 I/O pins allow flexible system design. The wide operating temperature range ensures reliable operation in retail environments.
Direkomendasikan
Audio Processing
The STM32F207ZGT6 can be used in audio processing applications such as audio interfaces, effects processors, and voice-controlled devices. Its 120 MHz Cortex-M3 core can handle audio DSP algorithms like filtering and equalization. The device's 2x 12-bit DACs can output analog audio signals, while the I2S interface (via SPI) connects to external audio codecs. The 1 MB Flash allows storing audio samples and processing code. The USB OTG supports audio streaming to/from a host. The device's low-latency interrupt handling ensures real-time audio processing. The cryptographic acceleration cell can be used for DRM protection.
Direkomendasikan
Ringkasan Produk Direkomendasikan
Data referensi engineering untuk STM32F207ZGT6 — pembandingan, panduan desain, dan informasi konformitas.
Panduan Pemilihan
Pembandingan dengan Alternatif
| Parameter Umum | Produk Ini | STM32F207ZGT6 | STM32F407ZGT6 | STM32F205ZGT6 |
|---|---|---|---|---|
| Package | LQFP144 | LQFP144 | LQFP144 | LQFP144 |
| Brand | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics |
| Core | ARM Cortex-M3 | ARM Cortex-M3 | ARM Cortex-M4 with FPU | ARM Cortex-M3 |
| Max Clock Frequency | 120 MHz | 120 MHz | 168 MHz | 120 MHz |
| Flash Memory | 1 MB | 1 MB | 1 MB | 1 MB |
| SRAM | 128 KB | 128 KB | 128 KB | 128 KB |
| Ethernet MAC | Yes | Yes | Yes | No |
| USB OTG | FS/HS | FS/HS | FS/HS | FS/HS |
| Price (1pc) | $12.50 | $12.50 | $14.20 | $11.80 |
Diferensiator Kunci
- Higher clock frequency than STM32F205ZGT6 (vsSTM32F205ZGT6)
- Ethernet MAC included (vsSTM32F205ZGT6)
- Lower power consumption than STM32F407ZGT6 (vsSTM32F407ZGT6)
Catatan Desain
The STM32F207ZGT6 requires a stable 3.3V supply. Decouple each VDD pin with a 100nF ceramic capacitor placed as close as possible to the pin, and add a 4.7uF bulk capacitor at the power entry. The VDDA pin should be filtered with a ferrite bead and a 1uF capacitor to reduce analog noise. Ensure the VDD and VDDA voltages are within 1.8V to 3.6V range.
For high-speed USB and Ethernet, use a 25 MHz crystal with load capacitors as specified in the datasheet. Keep the crystal traces short and away from high-speed digital signals. For the LQFP144 package, ensure proper solder paste stencil design for the 0.5mm pitch pins. Use a 4-layer PCB with a solid ground plane for best EMC performance.
Do not forget to configure the boot pins (BOOT0 and BOOT1) correctly. For normal operation, BOOT0 should be tied low. When programming via USART, BOOT0 must be high. Also, ensure the NRST pin has a 100nF capacitor to ground for reliable reset. The VCAP pins (if present) require a 2.2uF capacitor to ground for internal regulator stability.
Informasi Konformitas
RoHS and REACH compliant per STMicroelectronics. Not AEC-Q100 qualified; for automotive use, consider STM32F207ZGT6Q or similar.
