STM32L073CBT6 - 32MHz 128KB USB MCU | STMicroelectronics
MPN: STM32L073CBT6 ✓ AktifSTM32L073CBT6 Ringkasan
An ultra-low-power microcontroller is an integrated semiconductor designed to execute firmware while minimizing energy consumption during active, sleep, and low-power operating states. The STM32L0 family belongs to the Arm Cortex-M microcontroller hierarchy and combines a processor core, Flash, SRAM, clocks, communication peripherals, and GPIO in one device. Its low-power architecture is intended for battery-powered instruments, portable equipment, connected sensors, and always-on embedded products where active current and standby behavior influence battery life.
The STM32L073CBT6 provides 128 KB of programmable Flash organized as 128K × 8, together with 20 KB of SRAM for firmware, working data, and peripheral buffers. Its 32 MHz Arm Cortex-M0+ core supports deterministic control and efficient interrupt-driven operation. A 1.8 V to 3.6 V operating range permits use with common low-voltage embedded rails, while the USB 2.0 crystal-less connection simplifies designs that require USB connectivity without a separate external USB oscillator.
The 48-pin LQFP package exposes the device's GPIO and communication resources while providing generous routing flexibility compared with very small leadless packages. The package measures 7 × 7 mm and uses a conventional lead pitch that supports inspection, rework, and prototype assembly. LCD support is particularly relevant to human-interface designs that need a display without relying on an external LCD controller. The manufacturer describes the STM32L073xx family as incorporating crystal-less USB 2.0 connectivity.
Typical applications include low-power data loggers, USB-connected configuration tools, compact sensor nodes, industrial panel controllers, handheld measurement products, and battery-operated LCD instruments. In these systems, the 32 MHz processing rate supports protocol handling and control-loop execution, 128 KB of Flash accommodates application firmware, and 20 KB of SRAM supports buffering and working-state requirements. A regulated 3.3 V supply is common, while the 1.8 V minimum supports lower-voltage power budgets.
Design the PCB around the LQFP footprint and route sensitive USB, clock, and reset signals away from noisy switching stages. Place input and output decoupling capacitors close to the appropriate supply pins, follow the pin-description table in the manufacturer datasheet, and verify the selected startup mode before programming. Confirm USB clocking, LCD interface assignments, and low-power mode requirements early because peripheral assignments can constrain the board layout and firmware configuration.
This product page combines the exact device identity, core and memory characteristics, power range, package details, USB and LCD positioning, pin-compatible family alternatives, application guidance, and a parameter-by-parameter comparison. These engineering details help developers evaluate the STM32L073CBT6 for low-power embedded designs while recognizing that final qualification requires the complete manufacturer datasheet and application-specific validation.
Alternatif penggantian untuk STM32L073CBT6 — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.
Variasi di dalam seri ini
Model-series yang sama yang kompatibel dengan penggantian STM32L073CBT6 (sama faktor bentuk dan footprint) — berbeda di dalam Package, Flash Memory, Low-Power Modes, Core, ADC.
STM32L071CBT6
✅ Drop-In ⚠️ Spesifikasi Tidak DisahkanKontak untuk harga
Lihat Datasheet →STM32L072CBT6
✅ Drop-In ⚠️ Spesifikasi Tidak DisahkanKontak untuk harga
Lihat Datasheet →STM32L073CBT6 Rating Maksimal & Karakteristik Listrik
| Product Type | 32-bit ultra-low-power microcontroller |
| Processor Core | Arm Cortex-M0+ |
| Maximum CPU Frequency | 32 MHz |
| Architecture | 32-bit RISC |
| Flash Memory | 128 KB (128K × 8) |
| SRAM | 20 KB |
| Operating Voltage Range | 1.8 V to 3.6 V |
| USB Interface | USB 2.0 crystal-less |
| Display Support | LCD |
| Paket | 48-pin LQFP, 7 × 7 mm |
| Jumlah Pin | 48 pins |
| Tipe Mounting | Surface mount |
| Status RoHS | Compliant |
STM32L073CBT6 48-pin lqfp, 7 × 7 mm Diamant Konfigurasi Panduan
Konfigurasi pin untuk STM32L073CBT6 (48-pin lqfp, 7 × 7 mm pakai pakai). IC digital ini termasuk GPIO, antarmuka komunikasi (UART, SPI, I2C), dan pin kuasa. Lihat datasheet produsen untuk fungsi pin alternatif dan opsi konfigurasi. Penting untuk desain sistem pengemasan dan PCB.
Tidak ada data diatribut pin yang tersedia untuk STM32L073CBT6.
Lihat ke: datasheet produk untuk konfigurasi pin penuh.
Aplikasi Umum
STM32L073CBT6 cocok untuk 6 aplikasis: USB-Connected Sensor Node, Battery-Powered Data Logger, LCD Instrument Panel, Industrial Control Module, Portable Measurement Device, USB-to-Serial Configuration Interface.
USB-Connected Sensor Node
The STM32L073CBT6 fits a USB-connected sensor node because its 32 MHz Arm Cortex-M0+ core can supervise measurements and service USB traffic while 128 KB of Flash and 20 KB of SRAM support embedded firmware and working data. USB 2.0 crystal-less connectivity can simplify the clock design for compatible USB implementations. A precision analog front end such as the ADS1262IPW can perform high-resolution acquisition while the MCU controls configuration, timing, and data transfer. Validate the complete USB power, routing, and clock arrangement against the manufacturer guidance before production.
Direkomendasikan
Battery-Powered Data Logger
The STM32L073CBT6 is appropriate for a battery-powered data logger because the STM32L073xx family targets ultra-low-power embedded operation and supports a 1.8 V to 3.6 V supply range. Its 128 KB Flash stores application code and local records, while 20 KB of SRAM supports acquisition buffers and operating state. The 32 MHz core can process sensor events without requiring a high-performance MCU. Runtime behavior depends on the selected sleep modes, logging interval, indicator loads, and leakage outside the MCU, so complete board measurements should determine the expected battery life.
Direkomendasikan
LCD Instrument Panel
The STM32L073CBT6 supports a compact LCD instrument panel because the STM32L073xx family includes LCD support alongside its 32 MHz Arm Cortex-M0+ core and 20 KB of SRAM. The controller can maintain a user interface, process sensor inputs, and store application logic in 128 KB of Flash while operating from a 1.8 V to 3.6 V rail. The 48-pin LQFP package provides practical routing space for display and control signals. Confirm the selected display interface, segment requirements, timing, and pin allocation against the manufacturer documentation before layout release.
Direkomendasikan
Industrial Control Module
The STM32L073CBT6 can serve as the controller in a small industrial module that combines logic-level I/O, communication, and low-power operation. Its 32 MHz Cortex-M0+ core supports deterministic interrupt handling, while 128 KB of Flash and 20 KB of SRAM accommodate control software and local data. The 1.8 V to 3.6 V range supports common embedded rails, and the LQFP-48 package is convenient for prototype assembly and inspection. Add level translation or protection wherever field wiring exceeds the device's electrical limits, and confirm industrial temperature requirements separately.
Direkomendasikan
Portable Measurement Device
The STM32L073CBT6 fits a portable measurement device where low-power operation, compactness, and local processing are important. Its 32 MHz processor can calculate readings and manage controls, 128 KB of Flash can hold firmware, and 20 KB of SRAM can support acquisition and display buffers. The 1.8 V minimum operating voltage provides flexibility for compact power designs, while the USB 2.0 capability can simplify connection to a host for configuration or data export. Battery life and display performance should be evaluated with the final peripheral configuration and power-management settings.
Direkomendasikan
USB-to-Serial Configuration Interface
The STM32L073CBT6 can implement a USB-to-serial configuration interface because it combines crystal-less USB 2.0 connectivity with a 32 MHz core and 128 KB of Flash. Firmware can expose a command protocol, update configuration parameters, and bridge communications to an attached product. A bridge such as the SP3232EUEY-L can provide RS-232 signaling when that physical interface is required, while the STM32L073CBT6 manages the USB side and protocol logic. Validate bus levels, isolation, ESD strategy, and cable-routing requirements in the final hardware.
Direkomendasikan
Ringkasan Produk Direkomendasikan
Data referensi engineering untuk STM32L073CBT6 — pembandingan, panduan desain, dan informasi konformitas.
Panduan Pemilihan
Pembandingan dengan Alternatif
| Parameter Umum | Produk Ini | STM32L071CBT6 | STM32L072CBT6 |
|---|---|---|---|
| Brand | STMicroelectronics | STMicroelectronics | STMicroelectronics |
| Package | LQFP-48 (7x7 mm) | LQFP-48 (7x7 mm) | LQFP-48 (7x7 mm) |
| Processor Core | Arm Cortex-M0+ | Arm Cortex-M0+ | Arm Cortex-M0+ |
| Maximum CPU Frequency | 32 MHz | 32 MHz | 32 MHz |
| Flash Memory | 128 KB | 128 KB | 128 KB |
| SRAM | 20 KB | 20 KB | 20 KB |
| Operating Voltage Range | 1.8 V to 3.6 V | 1.8 V to 3.6 V | 1.8 V to 3.6 V |
| USB 2.0 Crystal-Less Connectivity | Yes | No | Yes |
Diferensiator Kunci
- Provides crystal-less USB 2.0 connectivity (vsSTM32L071CBT6)
- Combines USB connectivity and LCD support in one low-power MCU (vsSTM32L071CBT6)
- Retains a common 48-pin LQFP platform across the compared family (vsSTM32L072CBT6)
Catatan Desain
Route the USB differential pair as a controlled-impedance pair with closely matched geometry and continuous reference-plane support. Keep the pair away from switching nodes and high-current return paths. Follow the exact STM32L073CB manufacturer pin description and USB implementation schematic when assigning components, because the package is LQFP-48 and several adjacent pins can affect high-speed signal integrity.
Place the required bulk and high-frequency decoupling capacitors close to the device supply pins, with the shortest possible ground-return paths. Design the power system for the full 1.8 V to 3.6 V operating range and account for startup current when USB is attached. Confirm capacitor voltage ratings and DC-bias derating so the effective capacitance remains adequate under actual bias conditions.
Do not treat an LQFP footprint match as proof of firmware interchangeability. Review peripheral availability, alternate-function assignments, USB clock requirements, LCD connections, startup behavior, and memory-map differences between STM32L073CBT6 and an alternative. Keep boot configuration and reset implementation consistent with the manufacturer reference design, and perform a full power-up and peripheral test after any substitution.
Informasi Konformitas
RoHS compliance is identified for the STM32L073CBT6 product listing. REACH, lead-free, halogen-free, and conflict-minerals status are not stated in the product information and remain unknown.