STMicroelectronics

STM32L073CBT6 - 32MHz 128KB USB MCU | STMicroelectronics

MPN: STM32L073CBT6 ✓ فعال
1.8 V to 3.6 V Vdss 48-pin LQFP, 7 × 7 mm Package 32 MHz Speed 128 KB (128K × 8) Memory
MOQ: 1 |

STM32L073CBT6 جائزہ

The STMicroelectronics STM32L073CBT6 is an ultra-low-power 32-bit Arm Cortex-M0+ microcontroller with a 32 MHz CPU, 128 KB of Flash memory, 20 KB of SRAM, and USB 2.0 crystal-less connectivity in a 48-pin LQFP 7 × 7 mm package. The STM32L073CBT6 operates from 1.8 V to 3.6 V and combines low-power design with LCD support, making it suitable for compact embedded control systems.

An ultra-low-power microcontroller is an integrated semiconductor designed to execute firmware while minimizing energy consumption during active, sleep, and low-power operating states. The STM32L0 family belongs to the Arm Cortex-M microcontroller hierarchy and combines a processor core, Flash, SRAM, clocks, communication peripherals, and GPIO in one device. Its low-power architecture is intended for battery-powered instruments, portable equipment, connected sensors, and always-on embedded products where active current and standby behavior influence battery life.

The STM32L073CBT6 provides 128 KB of programmable Flash organized as 128K × 8, together with 20 KB of SRAM for firmware, working data, and peripheral buffers. Its 32 MHz Arm Cortex-M0+ core supports deterministic control and efficient interrupt-driven operation. A 1.8 V to 3.6 V operating range permits use with common low-voltage embedded rails, while the USB 2.0 crystal-less connection simplifies designs that require USB connectivity without a separate external USB oscillator.

The 48-pin LQFP package exposes the device's GPIO and communication resources while providing generous routing flexibility compared with very small leadless packages. The package measures 7 × 7 mm and uses a conventional lead pitch that supports inspection, rework, and prototype assembly. LCD support is particularly relevant to human-interface designs that need a display without relying on an external LCD controller. The manufacturer describes the STM32L073xx family as incorporating crystal-less USB 2.0 connectivity.

Typical applications include low-power data loggers, USB-connected configuration tools, compact sensor nodes, industrial panel controllers, handheld measurement products, and battery-operated LCD instruments. In these systems, the 32 MHz processing rate supports protocol handling and control-loop execution, 128 KB of Flash accommodates application firmware, and 20 KB of SRAM supports buffering and working-state requirements. A regulated 3.3 V supply is common, while the 1.8 V minimum supports lower-voltage power budgets.

Design the PCB around the LQFP footprint and route sensitive USB, clock, and reset signals away from noisy switching stages. Place input and output decoupling capacitors close to the appropriate supply pins, follow the pin-description table in the manufacturer datasheet, and verify the selected startup mode before programming. Confirm USB clocking, LCD interface assignments, and low-power mode requirements early because peripheral assignments can constrain the board layout and firmware configuration.

This product page combines the exact device identity, core and memory characteristics, power range, package details, USB and LCD positioning, pin-compatible family alternatives, application guidance, and a parameter-by-parameter comparison. These engineering details help developers evaluate the STM32L073CBT6 for low-power embedded designs while recognizing that final qualification requires the complete manufacturer datasheet and application-specific validation.

کے لیے ڈراپ اِن متبادل STM32L073CBT6 — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔

اس سیریز میں مختلف ورژن

اسی سیریز کے ماڈلز جو ڈراپ اِن مطابقت رکھتے ہیں STM32L073CBT6 (یکساں فارم فیکٹر اور فٹ پرنٹ) — میں مختلف Package, Flash Memory, Low-Power Modes, Core, ADC.

STMicroelectronics
Package: 48-pin LQFP, 7 x 7 mm
Flash Memory: 32 KB
Core: Arm Cortex-M0+
موازنہ کریں STM32L073CBT6 →
STMicroelectronics
Package: 48-LQFP
Flash Memory: 32 KB
Low-Power Modes: Ultra-low-power operation; exact mode currents require datasheet confirmation
موازنہ کریں STM32L073CBT6 →
STMicroelectronics
Package: LQFP-48 (7x7 mm)
Flash Memory: 128 KB
Low-Power Modes: Sleep, Low-power run, Low-power sleep, Stop, Standby
موازنہ کریں STM32L073CBT6 →
STMicroelectronics
Package: 48-LQFP (7x7 mm)
Flash Memory: 128 KB
Low-Power Modes: Standby, Stop, Sleep with RTC
موازنہ کریں STM32L073CBT6 →

STM32L071CBT6

✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہ
STMicroelectronics
📦 LQFP-48 (7x7 mm)
ARM Cortex-M0+ · 32 MHz · 128 KB · 20 KB · 1.65 V to 3.6 V · LQFP-48 (7x7 mm) · -40C to +85C · 12-bit, 16 channels, with hardware oversampling

قیمت کے لیے رابطہ کریں

ڈیٹا شیٹ دیکھیں →

STM32L072CBT6

✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہ
STMicroelectronics
📦 LQFP-48 (7x7 mm)
ARM Cortex-M0+ (32-bit) · 32 MHz · 128 KB · 20 KB · USB 2.0 Full-Speed device, crystal-less · 1.65 V to 3.6 V · -40 C to +85 C · 12-bit

قیمت کے لیے رابطہ کریں

ڈیٹا شیٹ دیکھیں →

STM32L073CBT6 زیادہ سے زیادہ ریٹنگز اور برقی خصوصیات

Product Type 32-bit ultra-low-power microcontroller
Processor Core Arm Cortex-M0+
Maximum CPU Frequency 32 MHz
Architecture 32-bit RISC
Flash Memory 128 KB (128K × 8)
SRAM 20 KB
Operating Voltage Range 1.8 V to 3.6 V
USB Interface USB 2.0 crystal-less
Display Support LCD
پیکیج 48-pin LQFP, 7 × 7 mm
پن کی تعداد 48 pins
ماؤنٹنگ ٹائپ Surface mount
RoHS اسٹیٹس Compliant

STM32L073CBT6 48-pin lqfp, 7 × 7 mm پن کنفیگریشن گائیڈ

STM32L073CBT6 (48-pin lqfp, 7 × 7 mm پیکیج) کے لیے پن کنفیگریشن۔ اس ڈیجیٹل IC میں GPIO، کمیونیکیشن انٹرفیس (UART، SPI، I2C) اور پاور پنز شامل ہیں۔ متبادل پن فنکشنز اور کنفیگریشن آپشنز کے لیے مینوفیکچرر کے ڈیٹا شیٹ سے رجوع کریں۔ ایمبیڈڈ سسٹم ڈیزائن اور PCB لے آؤٹ کے لیے ضروری۔

STM32L073CBT6 کے لیے 48-pin lqfp, 7 × 7 mm پیکیج پن آؤٹ ڈایاگرام

کے لیے تفصیلی پن آؤٹ ڈیٹا دستیاب نہیں STM32L073CBT6.

رجوع کریں ڈیٹا شیٹ مکمل پن کنفیگریشن کے لیے۔

عام استعمالات

STM32L073CBT6 کے لیے موزوں ہے 6 ایپلیکیشنs: USB-Connected Sensor Node, Battery-Powered Data Logger, LCD Instrument Panel, Industrial Control Module, Portable Measurement Device, USB-to-Serial Configuration Interface.

🧩

USB-Connected Sensor Node

The STM32L073CBT6 fits a USB-connected sensor node because its 32 MHz Arm Cortex-M0+ core can supervise measurements and service USB traffic while 128 KB of Flash and 20 KB of SRAM support embedded firmware and working data. USB 2.0 crystal-less connectivity can simplify the clock design for compatible USB implementations. A precision analog front end such as the ADS1262IPW can perform high-resolution acquisition while the MCU controls configuration, timing, and data transfer. Validate the complete USB power, routing, and clock arrangement against the manufacturer guidance before production.

⚡

Battery-Powered Data Logger

The STM32L073CBT6 is appropriate for a battery-powered data logger because the STM32L073xx family targets ultra-low-power embedded operation and supports a 1.8 V to 3.6 V supply range. Its 128 KB Flash stores application code and local records, while 20 KB of SRAM supports acquisition buffers and operating state. The 32 MHz core can process sensor events without requiring a high-performance MCU. Runtime behavior depends on the selected sleep modes, logging interval, indicator loads, and leakage outside the MCU, so complete board measurements should determine the expected battery life.

📺

LCD Instrument Panel

The STM32L073CBT6 supports a compact LCD instrument panel because the STM32L073xx family includes LCD support alongside its 32 MHz Arm Cortex-M0+ core and 20 KB of SRAM. The controller can maintain a user interface, process sensor inputs, and store application logic in 128 KB of Flash while operating from a 1.8 V to 3.6 V rail. The 48-pin LQFP package provides practical routing space for display and control signals. Confirm the selected display interface, segment requirements, timing, and pin allocation against the manufacturer documentation before layout release.

🏭

Industrial Control Module

The STM32L073CBT6 can serve as the controller in a small industrial module that combines logic-level I/O, communication, and low-power operation. Its 32 MHz Cortex-M0+ core supports deterministic interrupt handling, while 128 KB of Flash and 20 KB of SRAM accommodate control software and local data. The 1.8 V to 3.6 V range supports common embedded rails, and the LQFP-48 package is convenient for prototype assembly and inspection. Add level translation or protection wherever field wiring exceeds the device's electrical limits, and confirm industrial temperature requirements separately.

📱

Portable Measurement Device

The STM32L073CBT6 fits a portable measurement device where low-power operation, compactness, and local processing are important. Its 32 MHz processor can calculate readings and manage controls, 128 KB of Flash can hold firmware, and 20 KB of SRAM can support acquisition and display buffers. The 1.8 V minimum operating voltage provides flexibility for compact power designs, while the USB 2.0 capability can simplify connection to a host for configuration or data export. Battery life and display performance should be evaluated with the final peripheral configuration and power-management settings.

🌐

USB-to-Serial Configuration Interface

The STM32L073CBT6 can implement a USB-to-serial configuration interface because it combines crystal-less USB 2.0 connectivity with a 32 MHz core and 128 KB of Flash. Firmware can expose a command protocol, update configuration parameters, and bridge communications to an attached product. A bridge such as the SP3232EUEY-L can provide RS-232 signaling when that physical interface is required, while the STM32L073CBT6 manages the USB side and protocol logic. Validate bus levels, isolation, ESD strategy, and cable-routing requirements in the final hardware.

What is the operating voltage of STM32L073CBT6?
The STM32L073CBT6 operates from 1.8 V to 3.6 V. According to the STMicroelectronics STM32L073CB product page and the manufacturer product data for this ordering code, the device is designed for low-voltage embedded systems using the 128 KB Flash and 20 KB SRAM configuration. The 3.3 V rail is common in this range, but system designers must also verify every peripheral, USB, and external-component voltage requirement before finalizing the power architecture.
What are the key specifications of STM32L073CBT6?
The STM32L073CBT6 combines an Arm Cortex-M0+ core, 32 MHz operating frequency, 128 KB Flash, 20 KB SRAM, and USB 2.0 crystal-less connectivity in a 48-pin LQFP package. According to the STMicroelectronics STM32L073CB product page, the device is part of the ultra-low-power STM32L073xx family and supports LCD applications. These parameters place it between simple low-power controllers and more connectivity-oriented embedded MCUs.
Where can I download the STM32L073CBT6 datasheet PDF?
The official STM32L073CB manufacturer product page is the appropriate starting point for the STM32L073CBT6 datasheet, pin descriptions, electrical characteristics, and package drawings. Use the pin-description table when assigning PCB tracks and confirm the exact STM32L073CBT6 ordering code during review. The device uses a 48-pin LQFP package, so the package outline and pin numbering must be taken from the manufacturer documentation rather than inferred from a generic LQFP drawing.
Where can I find the STM32L073CBT6 pinout?
The STM32L073CBT6 pinout is defined by the manufacturer datasheet for the 48-pin LQFP package. Use the package pin-description table and land-pattern information for PCB routing, including the location of power, ground, reset, clock, USB, and general-purpose I/O connections. The manufacturer product page links to the technical documentation for the STM32L073CB family. Confirm the complete pin map against the exact ordering code before releasing a layout.
Is STM32L073CBT6 suitable for battery-powered devices?
The STM32L073CBT6 is suitable for battery-powered embedded products because it belongs to STMicroelectronics' ultra-low-power STM32L073xx family. Its 1.8 V to 3.6 V operating range supports low-voltage supply designs, while its 32 MHz Arm Cortex-M0+ core provides processing capacity without requiring a larger general-purpose MCU. Actual battery life depends on the selected sleep mode, active workload, USB state, LCD load, and board leakage, so measure the complete design rather than the controller alone.
What is the STM32L073CBT6 vs STM32L071CBT6 difference?
The STM32L073CBT6 is the STM32L0 option with USB 2.0 crystal-less connectivity and LCD support, while the STM32L071CBT6 is a related 32 MHz, 128 KB Flash family member without the same feature emphasis. Both use the 48-pin LQFP format and 1.8 V to 3.6 V supply range. Choose the L073 part when USB connectivity or LCD support is required; the L071 may suit simpler applications, subject to peripheral-level verification.
When should I choose STM32L073CBT6 over STM32L072CBT6?
Choose STM32L073CBT6 when the design benefits from the STM32L073xx feature set, particularly USB 2.0 crystal-less connectivity and LCD support. The STM32L072CBT6 offers the same 32 MHz Arm Cortex-M0+ performance, 128 KB Flash capacity, 20 KB SRAM, 1.8 V to 3.6 V range, and 48-pin LQFP format. The decision therefore depends on peripheral requirements and firmware support, not CPU speed or package compatibility. Review the manufacturer feature comparison before assigning pins.
Can STM32L073CBT6 be used for a USB-connected sensor node?
Yes, the STM32L073CBT6 is suitable for a USB-connected sensor node because it provides USB 2.0 crystal-less connectivity, a 32 MHz Arm Cortex-M0+ core, 128 KB Flash, and 20 KB SRAM. Place the USB data and power routing according to the manufacturer layout guidance, and verify the required transceiver arrangement for the selected USB implementation. A sensor interface such as the ADS1262IPW can add precision analog measurement, while the MCU handles acquisition control and USB communication.
What can replace STM32L073CBT6 without changing the PCB footprint?
The closest documented same-package options are STM32L071CBT6 and STM32L072CBT6, both of which use the 48-pin LQFP format and retain the 32 MHz, 128 KB Flash, 20 KB SRAM, and 1.8 V to 3.6 V operating characteristics. They are footprint-compatible alternatives, but firmware and peripheral requirements must be checked. No independently established cross-brand drop-in replacement is identified for this exact USB and LCD feature combination.
Is STM32L071CBT6 the same as STM32L073CBT6?
No. The STM32L071CBT6 and STM32L073CBT6 share a 48-pin LQFP footprint and several core specifications, including a 32 MHz Arm Cortex-M0+ processor, 128 KB Flash, 20 KB SRAM, and 1.8 V to 3.6 V operation. The STM32L073CBT6 provides the USB 2.0 crystal-less and LCD positioning of the STM32L073xx family, so it is the stronger choice when those functions are required. Verify peripheral assignments and firmware migration before substitution.
What is the best cross-brand equivalent for STM32L073CBT6?
No cross-brand part can be confirmed as a true drop-in equivalent for the STM32L073CBT6 from the established product comparison. A replacement must preserve the 48-pin LQFP footprint while maintaining 32 MHz operation, 1.8 V to 3.6 V supply, 128 KB Flash, 20 KB SRAM, USB 2.0 crystal-less connectivity, and LCD support. Parts that change the core architecture, peripheral map, or USB implementation should be treated as redesign candidates rather than drop-in replacements.
Where can I buy STM32L073CBT6 online?
Use the Request a Quote form on this page to request STM32L073CBT6 availability, lead time, and order details. The form lets the purchasing team confirm the exact 48-pin LQFP ordering code, current lifecycle status, and appropriate shipment quantity without relying on a static listing. For production planning, request confirmation of the manufacturer product number, tray or reel handling, and any date-code requirements before issuing a purchase order.
What is the price of STM32L073CBT6?
The Request a Quote form on this page provides the current purchasing response for STM32L073CBT6, including quantity, availability, and lead time. Pricing for this microcontroller changes with order volume, supply position, packaging configuration, and shipment terms. Use the form with the required production quantity so the quote can be matched to the exact 48-pin LQFP ordering code rather than a related STM32L073 series variant.
What is the lead time and stock status for STM32L073CBT6?
The Request a Quote form on this page is the correct route for confirming current stock, minimum order quantity, and lead time for STM32L073CBT6. Lead time can vary with quantity and supply conditions, so a quote response should be based on the planned build quantity and required delivery date. Include the 48-pin LQFP package requirement and any reel-versus-tray preference in the request to prevent an unsuitable packaging configuration from being quoted.
Does STM32L073CBT6 support USB without an external crystal?
Yes, the STM32L073CBT6 belongs to the STM32L073xx family described by STMicroelectronics as incorporating crystal-less USB 2.0 connectivity. This feature can simplify the clock arrangement for compatible USB designs compared with an implementation requiring a dedicated external USB clock source. The USB data routing, series termination, power supervision, and transceiver arrangement must still follow the exact manufacturer schematic and layout guidance for the selected USB interface.

کے لیے انجینئرنگ ریفرنس ڈیٹا STM32L073CBT6 — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔

انتخاب کی گائیڈ

Choose STM32L073CBT6 when the design needs an ultra-low-power 32 MHz Arm Cortex-M0+ MCU with 128 KB Flash, 20 KB SRAM, USB 2.0 crystal-less connectivity, LCD support, and a 48-pin LQFP footprint. It is especially appropriate for USB-connected instruments, portable data loggers, and compact LCD-based equipment. STM32L071CBT6 can suit a simpler 32 MHz, 128 KB-class design that does not require the STM32L073xx USB and LCD feature set. STM32L072CBT6 is the closer option when USB is needed but the complete STM32L073xx feature set is unnecessary. Because all three use the same family architecture and package, software migration is more practical than with a cross-vendor MCU, but peripheral availability and pin assignments must still be reviewed. No cross-brand substitute should be treated as a drop-in without an independent pin, clock, memory, and peripheral qualification.

متبادلات کے ساتھ موازنہ

پیرامیٹر یہ پروڈکٹ STM32L071CBT6 STM32L072CBT6
Brand STMicroelectronics STMicroelectronics STMicroelectronics
Package LQFP-48 (7x7 mm) LQFP-48 (7x7 mm) LQFP-48 (7x7 mm)
Processor Core Arm Cortex-M0+ Arm Cortex-M0+ Arm Cortex-M0+
Maximum CPU Frequency 32 MHz 32 MHz 32 MHz
Flash Memory 128 KB 128 KB 128 KB
SRAM 20 KB 20 KB 20 KB
Operating Voltage Range 1.8 V to 3.6 V 1.8 V to 3.6 V 1.8 V to 3.6 V
USB 2.0 Crystal-Less Connectivity Yes No Yes

اہم امتیازی خصوصیات

  • Provides crystal-less USB 2.0 connectivity (بمقابلہSTM32L071CBT6)
  • Combines USB connectivity and LCD support in one low-power MCU (بمقابلہSTM32L071CBT6)
  • Retains a common 48-pin LQFP platform across the compared family (بمقابلہSTM32L072CBT6)

ڈیزائن نوٹس

Route the USB differential pair as a controlled-impedance pair with closely matched geometry and continuous reference-plane support. Keep the pair away from switching nodes and high-current return paths. Follow the exact STM32L073CB manufacturer pin description and USB implementation schematic when assigning components, because the package is LQFP-48 and several adjacent pins can affect high-speed signal integrity.

Place the required bulk and high-frequency decoupling capacitors close to the device supply pins, with the shortest possible ground-return paths. Design the power system for the full 1.8 V to 3.6 V operating range and account for startup current when USB is attached. Confirm capacitor voltage ratings and DC-bias derating so the effective capacitance remains adequate under actual bias conditions.

Do not treat an LQFP footprint match as proof of firmware interchangeability. Review peripheral availability, alternate-function assignments, USB clock requirements, LCD connections, startup behavior, and memory-map differences between STM32L073CBT6 and an alternative. Keep boot configuration and reset implementation consistent with the manufacturer reference design, and perform a full power-up and peripheral test after any substitution.

تعمیل کی معلومات

RoHS
Compliant
REACH
Unknown
AEC-Q100
Not Applicable
لیڈ فری
Unknown
ہیلوجن فری
Unknown
کنفلیکٹ منرلز
Unknown

RoHS compliance is identified for the STM32L073CBT6 product listing. REACH, lead-free, halogen-free, and conflict-minerals status are not stated in the product information and remain unknown.

ڈیٹا کی تصدیق کی تاریخ: 2026-11-19 — ڈیٹا XAIPART کی کمپوننٹ انجینئرنگ ٹیم کے ذریعے تصدیق شدہ اور ترتیب شدہ

متعلقہ تلاشیں

STM32L073CBT6 STM32L073CBT6 datasheet STM32L073CBT6 datasheet pdf STM32L073CBT6 pinout STM32L073CBT6 footprint STM32L073CBT6 equivalent STM32L073CBT6 replacement STM32L073CBT6 vs STM32L071CBT6 STM32L073CBT6 USB LCD MCU STM32L073CBT6 price STMicroelectronics STM32L073CBT6 STM32L073CBT6 LQFP-48

متعلقہ اجزاء اور اصطلاحات

STMicroelectronics STM32L073CBT6 STM32L071CBT6 STM32L072CBT6 Arm Cortex-M0+ microcontroller MCU ultra-low-power microcontroller embedded microcontroller semiconductor USB 2.0 crystal-less USB LCD controller LQFP-48 surface mount 32 MHz 128 KB Flash 20 KB SRAM 1.8 V 3.6 V RoHS
فوری کوٹ RFQ
مکمل تفصیلات بھریں — ہماری سیلز ٹیم 24 گھنٹوں میں جواب دے گی
پارٹ نمبر مینوفیکچرر پیکج QTY ہدف قیمت کل رقم
✓
کوٹ جمع ہو گیا!

ہم 24 گھنٹوں کے اندر آپ کے ای میل کا جواب دیں گے

1
RFQ جمع ہو گیا
2
کوٹ موصول ہو گیا
3
آرڈر دے دیا گیا
4
ادائیگی
5
بھیج دیا گیا
6
ڈیلیور شدہ
RFQ تفصیلات دیکھیں