STM32L073CBT6 - 32MHz 128KB USB MCU | STMicroelectronics
MPN: STM32L073CBT6 ✓ 啟用中STM32L073CBT6 概覽
An ultra-low-power microcontroller is an integrated semiconductor designed to execute firmware while minimizing energy consumption during active, sleep, and low-power operating states. The STM32L0 family belongs to the Arm Cortex-M microcontroller hierarchy and combines a processor core, Flash, SRAM, clocks, communication peripherals, and GPIO in one device. Its low-power architecture is intended for battery-powered instruments, portable equipment, connected sensors, and always-on embedded products where active current and standby behavior influence battery life.
The STM32L073CBT6 provides 128 KB of programmable Flash organized as 128K × 8, together with 20 KB of SRAM for firmware, working data, and peripheral buffers. Its 32 MHz Arm Cortex-M0+ core supports deterministic control and efficient interrupt-driven operation. A 1.8 V to 3.6 V operating range permits use with common low-voltage embedded rails, while the USB 2.0 crystal-less connection simplifies designs that require USB connectivity without a separate external USB oscillator.
The 48-pin LQFP package exposes the device's GPIO and communication resources while providing generous routing flexibility compared with very small leadless packages. The package measures 7 × 7 mm and uses a conventional lead pitch that supports inspection, rework, and prototype assembly. LCD support is particularly relevant to human-interface designs that need a display without relying on an external LCD controller. The manufacturer describes the STM32L073xx family as incorporating crystal-less USB 2.0 connectivity.
Typical applications include low-power data loggers, USB-connected configuration tools, compact sensor nodes, industrial panel controllers, handheld measurement products, and battery-operated LCD instruments. In these systems, the 32 MHz processing rate supports protocol handling and control-loop execution, 128 KB of Flash accommodates application firmware, and 20 KB of SRAM supports buffering and working-state requirements. A regulated 3.3 V supply is common, while the 1.8 V minimum supports lower-voltage power budgets.
Design the PCB around the LQFP footprint and route sensitive USB, clock, and reset signals away from noisy switching stages. Place input and output decoupling capacitors close to the appropriate supply pins, follow the pin-description table in the manufacturer datasheet, and verify the selected startup mode before programming. Confirm USB clocking, LCD interface assignments, and low-power mode requirements early because peripheral assignments can constrain the board layout and firmware configuration.
This product page combines the exact device identity, core and memory characteristics, power range, package details, USB and LCD positioning, pin-compatible family alternatives, application guidance, and a parameter-by-parameter comparison. These engineering details help developers evaluate the STM32L073CBT6 for low-power embedded designs while recognizing that final qualification requires the complete manufacturer datasheet and application-specific validation.
直接替換替代品,適用於 STM32L073CBT6 — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: STM32L073CBT6 (相同外形與佔位) — 差異在於 Package, Flash Memory, Low-Power Modes, Core, ADC.
STM32L071CBT6
✅ 直接替換 ⚠️ 規格未經驗證聯絡詢價
查看資料表 →STM32L072CBT6
✅ 直接替換 ⚠️ 規格未經驗證聯絡詢價
查看資料表 →STM32L073CBT6 最大額定值與電氣特性
| Product Type | 32-bit ultra-low-power microcontroller |
| Processor Core | Arm Cortex-M0+ |
| Maximum CPU Frequency | 32 MHz |
| Architecture | 32-bit RISC |
| Flash Memory | 128 KB (128K × 8) |
| SRAM | 20 KB |
| Operating Voltage Range | 1.8 V to 3.6 V |
| USB Interface | USB 2.0 crystal-less |
| Display Support | LCD |
| 封裝 | 48-pin LQFP, 7 × 7 mm |
| 腳位數 | 48 pins |
| 安裝類型 | Surface mount |
| RoHS 狀態 | Compliant |
STM32L073CBT6 48-pin lqfp, 7 × 7 mm 腳位配置指南
STM32L073CBT6(48-pin lqfp, 7 × 7 mm 封裝)的腳位配置。 此數位 IC 包含 GPIO、通訊介面(UART、SPI、I2C)與電源腳位。替代腳位功能與配置選項請參閱製造商資料表。對嵌入式系統設計與 PCB 佈局至關重要。
無詳細腳位定義資料: STM32L073CBT6.
請參閱 資料表 以查看完整腳位配置。
典型應用
STM32L073CBT6 適用於 6 應用s: USB-Connected Sensor Node, Battery-Powered Data Logger, LCD Instrument Panel, Industrial Control Module, Portable Measurement Device, USB-to-Serial Configuration Interface.
USB-Connected Sensor Node
The STM32L073CBT6 fits a USB-connected sensor node because its 32 MHz Arm Cortex-M0+ core can supervise measurements and service USB traffic while 128 KB of Flash and 20 KB of SRAM support embedded firmware and working data. USB 2.0 crystal-less connectivity can simplify the clock design for compatible USB implementations. A precision analog front end such as the ADS1262IPW can perform high-resolution acquisition while the MCU controls configuration, timing, and data transfer. Validate the complete USB power, routing, and clock arrangement against the manufacturer guidance before production.
推薦
Battery-Powered Data Logger
The STM32L073CBT6 is appropriate for a battery-powered data logger because the STM32L073xx family targets ultra-low-power embedded operation and supports a 1.8 V to 3.6 V supply range. Its 128 KB Flash stores application code and local records, while 20 KB of SRAM supports acquisition buffers and operating state. The 32 MHz core can process sensor events without requiring a high-performance MCU. Runtime behavior depends on the selected sleep modes, logging interval, indicator loads, and leakage outside the MCU, so complete board measurements should determine the expected battery life.
推薦
LCD Instrument Panel
The STM32L073CBT6 supports a compact LCD instrument panel because the STM32L073xx family includes LCD support alongside its 32 MHz Arm Cortex-M0+ core and 20 KB of SRAM. The controller can maintain a user interface, process sensor inputs, and store application logic in 128 KB of Flash while operating from a 1.8 V to 3.6 V rail. The 48-pin LQFP package provides practical routing space for display and control signals. Confirm the selected display interface, segment requirements, timing, and pin allocation against the manufacturer documentation before layout release.
推薦
Industrial Control Module
The STM32L073CBT6 can serve as the controller in a small industrial module that combines logic-level I/O, communication, and low-power operation. Its 32 MHz Cortex-M0+ core supports deterministic interrupt handling, while 128 KB of Flash and 20 KB of SRAM accommodate control software and local data. The 1.8 V to 3.6 V range supports common embedded rails, and the LQFP-48 package is convenient for prototype assembly and inspection. Add level translation or protection wherever field wiring exceeds the device's electrical limits, and confirm industrial temperature requirements separately.
推薦
Portable Measurement Device
The STM32L073CBT6 fits a portable measurement device where low-power operation, compactness, and local processing are important. Its 32 MHz processor can calculate readings and manage controls, 128 KB of Flash can hold firmware, and 20 KB of SRAM can support acquisition and display buffers. The 1.8 V minimum operating voltage provides flexibility for compact power designs, while the USB 2.0 capability can simplify connection to a host for configuration or data export. Battery life and display performance should be evaluated with the final peripheral configuration and power-management settings.
推薦
USB-to-Serial Configuration Interface
The STM32L073CBT6 can implement a USB-to-serial configuration interface because it combines crystal-less USB 2.0 connectivity with a 32 MHz core and 128 KB of Flash. Firmware can expose a command protocol, update configuration parameters, and bridge communications to an attached product. A bridge such as the SP3232EUEY-L can provide RS-232 signaling when that physical interface is required, while the STM32L073CBT6 manages the USB side and protocol logic. Validate bus levels, isolation, ESD strategy, and cable-routing requirements in the final hardware.
推薦
推薦產品摘要
工程參考資料,適用於 STM32L073CBT6 — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | STM32L071CBT6 | STM32L072CBT6 |
|---|---|---|---|
| Brand | STMicroelectronics | STMicroelectronics | STMicroelectronics |
| Package | LQFP-48 (7x7 mm) | LQFP-48 (7x7 mm) | LQFP-48 (7x7 mm) |
| Processor Core | Arm Cortex-M0+ | Arm Cortex-M0+ | Arm Cortex-M0+ |
| Maximum CPU Frequency | 32 MHz | 32 MHz | 32 MHz |
| Flash Memory | 128 KB | 128 KB | 128 KB |
| SRAM | 20 KB | 20 KB | 20 KB |
| Operating Voltage Range | 1.8 V to 3.6 V | 1.8 V to 3.6 V | 1.8 V to 3.6 V |
| USB 2.0 Crystal-Less Connectivity | Yes | No | Yes |
主要差異化特點
- Provides crystal-less USB 2.0 connectivity (對比STM32L071CBT6)
- Combines USB connectivity and LCD support in one low-power MCU (對比STM32L071CBT6)
- Retains a common 48-pin LQFP platform across the compared family (對比STM32L072CBT6)
設計說明
Route the USB differential pair as a controlled-impedance pair with closely matched geometry and continuous reference-plane support. Keep the pair away from switching nodes and high-current return paths. Follow the exact STM32L073CB manufacturer pin description and USB implementation schematic when assigning components, because the package is LQFP-48 and several adjacent pins can affect high-speed signal integrity.
Place the required bulk and high-frequency decoupling capacitors close to the device supply pins, with the shortest possible ground-return paths. Design the power system for the full 1.8 V to 3.6 V operating range and account for startup current when USB is attached. Confirm capacitor voltage ratings and DC-bias derating so the effective capacitance remains adequate under actual bias conditions.
Do not treat an LQFP footprint match as proof of firmware interchangeability. Review peripheral availability, alternate-function assignments, USB clock requirements, LCD connections, startup behavior, and memory-map differences between STM32L073CBT6 and an alternative. Keep boot configuration and reset implementation consistent with the manufacturer reference design, and perform a full power-up and peripheral test after any substitution.
合規資訊
RoHS compliance is identified for the STM32L073CBT6 product listing. REACH, lead-free, halogen-free, and conflict-minerals status are not stated in the product information and remain unknown.