Microchip Technology

SY89296UTI - 1.5GHz LVPECL 1024-Tap Delay Line | Microchip

MPN: SY89296UTI ✓ Aktif
2.5 V or 3.3 V Vdss 32-pin TQFP Package 1.5 GHz Speed
MOQ: 1 |

SY89296UTI Ringkasan

The Microchip Technology SY89296UTI is a precision LVPECL programmable delay-line IC with a 3.2 ns to 14.8 ns delay range, 1,024 selectable taps, and operation up to 1.5 GHz in a 32-pin TQFP package. The digital control interface programs the delay in 10 ps increments, while an analog fine-tune input permits continuous adjustment over an approximately 40 ps range.

A programmable delay line is a timing-control semiconductor that inserts a calibrated interval between an incoming signal and its output. Within the broader clock and timing hierarchy, it combines a clock-and-timing IC with a digitally controlled delay element. The SY89296U supports precise phase alignment, delay compensation, and signal-path timing calibration in systems where fixed propagation delay is insufficient.

Key features include 1,024 discrete delay taps, a 10 ps digital delay increment, a 10-bit delay control word, and a separate D[10] cascade-control bit. The input and inverted input default to an equivalent low state when left floating. An additional 11th control bit permits simultaneous cascading of SY89296U devices for a larger delay range. The analog fine-tune function adds approximately 40 ps of continuous adjustment to the digitally selected delay.

The SY89296U uses LVPECL-compatible high-speed differential signaling for 2.5 V or 3.3 V operation. Its input bandwidth reaches 1.5 GHz, allowing it to operate as a programmable phase-shifting element rather than merely a low-frequency timing delay. The combination of 10 ps digital steps and analog fine tuning supports both coarse alignment across a wide interval and fine adjustment within one digital step.

Typical uses include clock and data recovery timing compensation, high-speed serial-interface phase alignment, telecommunications timing adjustment, instrumentation synchronization, and automated test equipment. In each case, engineers use the digital control bits to select a coarse delay and then use the fine-tune control for precision calibration when fixed clock distribution alone cannot accommodate propagation, skew, or board-timing variation.

PCB implementation requires careful treatment of differential clock signals and their return paths. The SY89296UTI should be placed close to the circuit requiring phase adjustment, with short and symmetrically routed differential traces, solid ground-plane reference, and minimal stubs. Power and ground connections must follow the pin-description and layout guidance in the manufacturer datasheet. Termination values and decoupling should be selected from the circuit conditions rather than estimated from nominal voltage alone.

This page consolidates the manufacturer’s programming architecture, delay-resolution details, interface information, and practical PCB considerations into an engineering-focused guide. It also distinguishes the SY89296UTI from a verified drop-in replacement list, avoiding unsupported substitutions that could compromise LVPECL timing, control compatibility, or the 32-pin footprint.

Alternatif penggantian untuk SY89296UTI — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.

Tidak ada alternatif pengganti yang tersedia untuk produk ini.

Permintaan Alternatif

SY89296UTI Spesifikasi

Product Type Precision LVPECL programmable delay-line IC
Maximum Operating Frequency 1.5 GHz
Minimum Programmable Delay 3.2 ns
Maximum Programmable Delay 14.8 ns
Delay Resolution 10 ps per digital step
Number of Taps 1,024 taps
Digital Delay Control Word 10 bits
Cascade Control D[10] control bit for simultaneous cascading
Analog Fine-Tune Range Approximately 40 ps
Tegangan Pemuat 2.5 V or 3.3 V
Output Logic LVPECL
Input Signal Differential input with IN and /IN pins
Floating Input State IN and /IN default to an equivalent low state
Paket 32-pin TQFP
Tipe Mounting Surface mount

SY89296UTI 32-pin tqfp Diamant Konfigurasi Panduan

Konfigurasi pin untuk SY89296UTI (32-pin tqfp pakai pakai). Penomoran pin, fungsi, dan diagram koneksi ditetapkan dalam datasheet produsen. Lihatnya untuk footprint dan pedoman perpindahan paruh.

Diamant diagram pakai pakai 32-pin tqfp untuk SY89296UTI

Tidak ada data diatribut pin yang tersedia untuk SY89296UTI.

Lihat ke: datasheet produk untuk konfigurasi pin penuh.

Aplikasi Umum

SY89296UTI cocok untuk 6 aplikasis: High-Speed Clock Phase Alignment, Telecommunications Timing Compensation, Data Recovery Path Timing, Precision Test and Measurement, Automated Semiconductor Test Systems, Industrial Synchronization Networks.

🌐

High-Speed Clock Phase Alignment

The SY89296UTI fits clock-phase alignment systems that require programmable correction after board assembly. Its 1,024 digital taps cover a 3.2 ns to 14.8 ns delay range, with each control-word increment adding 10 ps, while the analog fine-tune input provides approximately 40 ps of continuous adjustment. Place the device near the clock-consuming circuit, route the differential LVPECL paths symmetrically, and use the coarse digital steps before applying fine calibration. This approach allows a single clock-distribution design to compensate for propagation, skew, or component variation without relocating the clock source.

🌐

Telecommunications Timing Compensation

The SY89296UTI supports telecommunications timing compensation where serial links or recovered clocks need adjustable timing rather than a fixed propagation interval. Its 1.5 GHz operating frequency and 10 ps digital delay resolution suit high-speed timing paths, while LVPECL signaling supports differential distribution on suitable circuit boards. Use the 3.2 ns to 14.8 ns programmable range for coarse timing correction and the approximately 40 ps fine-tune range for calibration. Preserve impedance continuity, minimize trace stubs, and follow the manufacturer termination and decoupling guidance.

📡

Data Recovery Path Timing

The SY89296UTI can be inserted into a high-speed data-recovery path to create a controlled phase relationship between data and clock. The 1,024-tap architecture provides 10 ps nominal resolution across a 3.2 ns to 14.8 ns interval, allowing calibration to compensate for trace and component delay. Analog fine tuning of approximately 40 ps supports the final setup-and-hold adjustment when digital increments alone are too coarse. Keep the device close to the receiving logic, use short differential routes with continuous reference planes, and validate eye margin after every timing change.

🔧

Precision Test and Measurement

The SY89296UTI is appropriate for instrumentation requiring a repeatable, digitally selectable delay in a calibration or synchronization path. The 10 ps control-word increments permit deterministic settings across 1,024 taps, while analog fine tuning enables sub-step adjustment over approximately 40 ps. Use the device in a controlled-temperature fixture when measurement accuracy depends on timing repeatability, and document the control-word value for each calibration point. Differential LVPECL routing and clean supplies help isolate the delay-line behavior from jitter introduced by the surrounding test system.

🏭

Automated Semiconductor Test Systems

The SY89296UTI supports automated test systems that need digitally controlled timing adjustment for device characterization or load-board synchronization. Its 1,024 discrete settings and 10 ps steps allow test recipes to select repeatable delay values, while the 3.2 ns to 14.8 ns range addresses common interconnect and fixture timing offsets. Position the delay line near the device-under-test interface to limit additional trace uncertainty. Control the analog fine-tune input carefully during calibration because it permits continuous adjustment of approximately 40 ps beyond the digital setting.

🏭

Industrial Synchronization Networks

The SY89296UTI fits industrial synchronization networks where distributed equipment requires a configurable timing offset. Its 1.5 GHz capability and 10 ps digital resolution permit precise alignment of high-speed control or communication clocks, while the LVPECL interface supports differential signaling over controlled PCB routes. Program the coarse delay through the 10-bit control word, then use the approximately 40 ps analog range for production calibration. Validate timing over the complete environmental range and isolate the device from sources of switching noise that could obscure the intended phase relationship.

Ringkasan Produk Direkomendasikan

SY89296UTI Microchip Technology Digunakan di dalam: High-Speed Clock Phase Alignment, Telecommunications Timing Compensation, Data Recovery Path Timing, Precision Test and Measurement, Automated Semiconductor Test Systems, Industrial Synchronization Networks SY89296UTI-TR Related ordering configuration Digunakan di dalam: High-Speed Clock Phase Alignment, Telecommunications Timing Compensation, Data Recovery Path Timing, Precision Test and Measurement, Automated Semiconductor Test Systems, Industrial Synchronization Networks
What is the operating frequency of the SY89296UTI?
The SY89296UTI operates up to 1.5 GHz as a precision LVPECL programmable delay line. According to the Microchip Technology manufacturer datasheet, the device combines a 1,024-tap delay architecture with digital delay programming in 10 ps increments. This frequency capability makes it suitable for high-speed clock and data-path phase adjustment rather than only low-speed logic timing compensation.
What is the delay range and resolution of SY89296UTI?
The SY89296UTI provides a programmable delay from 3.2 ns to 14.8 ns with 10 ps digital increments. The manufacturer datasheet identifies a 10-bit control word for the 1,024 discrete taps and an additional D[10] bit for cascading. An analog fine-tune input provides continuous adjustment over approximately 40 ps for precision alignment.
Where can I download the SY89296UTI datasheet PDF?
The official SY89296U manufacturer datasheet is available from Microchip Technology at the product-page download URL listed on this page. It documents the 1,024-tap architecture, 10 ps digital delay steps, analog fine-tune control, cascade behavior, LVPECL interfaces, pin descriptions, and recommended implementation details. Use the pin-description table when assigning PCB nets.
Where can I find the SY89296UTI pinout?
The SY89296UTI pinout is shown in the Microchip Technology manufacturer datasheet for the 32-pin TQFP package. The device includes differential input, differential LVPECL outputs, delay-control inputs, cascade control, and power connections. Assign every pin from the datasheet pin-description table and preserve the package’s exposed-pad requirements where applicable.
How is the digital delay programmed in the SY89296UTI?
The SY89296UTI uses a 10-bit delay control word to select one of 1,024 discrete delay steps, and each step changes delay by 10 ps. The eleventh bit, D[10], controls simultaneous cascading of SY89296U devices. According to the manufacturer datasheet, the analog fine-tune input can then vary the selected delay continuously over approximately 40 ps.
What is the difference between SY89296UTI and SY89296UTI-TR?
The SY89296UTI and SY89296UTI-TR identify the same SY89296U delay-line device, while the suffix difference distinguishes the listed packaging or shipping configuration. Both listings identify a 1,024-tap, 3.2 ns to 14.8 ns programmable delay line in a 32-pin TQFP. Verify reel orientation, tape dimensions, and dry-packing requirements against the manufacturer ordering information before substitution.
What can replace the SY89296UTI?
No independently verified drop-in replacement for the SY89296UTI is identified on this page. A suitable substitute must match the 32-pin TQFP footprint, LVPECL interfaces, 1,024-tap 10 ps programming scheme, 3.2 ns to 14.8 ns delay range, cascade behavior, and analog fine-tune function. Use the Request a Quote form on this page to request current sourcing and engineering review.
What is the best Microchip equivalent for SY89296UTI?
The closest manufacturer-supported ordering expression is the SY89296UTI family itself, rather than a verified alternate MPN with confirmed pin-to-pin compatibility. The SY89296UTI-TR is a related ordering configuration, but it does not establish that an electrically different cross-brand part can replace the device. Confirm package, control protocol, delay range, and LVPECL compatibility before approving any substitute.
When should I choose the SY89296UTI over a fixed-delay line?
Choose the SY89296UTI when the required phase relationship can change after assembly, calibration, or operating conditions. Its 1,024 digitally selectable taps cover 3.2 ns to 14.8 ns in 10 ps increments, and the analog fine-tune range adds approximately 40 ps of continuous adjustment. A fixed-delay line is preferable only when the interval is known, stable, and does not require field adjustment.
Is the SY89296UTI suitable for high-speed communication clock alignment?
The SY89296UTI is suitable for high-speed communication timing adjustment when the interface and board constraints match its LVPECL implementation. Its 1.5 GHz operating frequency and 10 ps digital resolution support phase calibration in demanding clock paths. Differential routing, return-path continuity, reference-plane design, and output termination remain essential to preserve timing integrity.
Where can I buy SY89296UTI online?
Use the Request a Quote form on this page to request the SY89296UTI and confirm current availability, order quantity, lead time, and shipping options. The form provides a direct sourcing path without embedding a volatile price or availability claim. For production releases, also confirm the manufacturer ordering suffix, package drawing, and tape-and-reel requirements.
What is the price of the SY89296UTI?
Current commercial terms for the SY89296UTI are shown through the Request a Quote form on this page. Pricing depends on order quantity, package configuration, production volume, and current component availability. Submit the required quantity and target application so the quote can reflect the appropriate supply configuration without relying on a stale catalog figure.
What is the lead time and stock status for SY89296UTI?
Request current stock, minimum order quantity, and lead time through the Request a Quote form on this page. Lead time can vary with order size, scheduled production, and the selected ordering configuration. Request the SY89296UTI with the appropriate package suffix for your assembly process and include the required delivery date in the inquiry.
How much delay can multiple SY89296U devices provide?
The SY89296U supports cascading through the dedicated D[10] control function, allowing multiple devices to contribute to a larger delay range. The manufacturer datasheet explains the cascade-control arrangement and control-register behavior. Use that guidance to define how several 3.2 ns to 14.8 ns delay ranges combine and to preserve synchronized clock and control routing.
What are the key specifications of SY89296UTI that engineers should know?
The key SY89296UTI specifications are 1.5 GHz maximum operating frequency, 1,024 delay taps, a 3.2 ns to 14.8 ns digital range, 10 ps delay increments, approximately 40 ps analog fine-tune range, and LVPECL operation at 2.5 V or 3.3 V. The device also includes a 10-bit delay word, a separate cascade-control bit, differential inputs, and a 32-pin TQFP package.
Does the SY89296UTI meet automotive, RoHS, or REACH requirements?
The automotive and environmental qualification status must be confirmed for the exact ordering configuration before use in a regulated application. The manufacturer datasheet and product page should be checked for RoHS, REACH, lead-free, halogen-free, and AEC-Q100 statements. Do not infer automotive qualification solely from the operating-temperature or device-family description.

Data referensi engineering untuk SY89296UTI — pembandingan, panduan desain, dan informasi konformitas.

Panduan Pemilihan

Choose the SY89296UTI when a high-speed design requires adjustable clock or data-path delay with 10 ps digital resolution, analog fine tuning, and LVPECL interfaces. Its 1,024 taps cover 3.2 ns to 14.8 ns, making it well suited to compensation for board delay, clock skew, and calibration offsets. The SY89296UTI-TR is a related ordering configuration that should be selected after confirming reel, tape, and assembly requirements rather than for different electrical performance. No other drop-in replacement is approved on this page because a valid substitute must reproduce the package, control protocol, delay range, fine-tune function, cascade behavior, and LVPECL interface. If a lower-frequency or fixed-delay device is sufficient, one of those may simplify the design, but it will not provide the SY89296UTI’s programmable timing range.

Pembandingan dengan Alternatif

Parameter Umum Produk Ini
Brand Microchip Technology
Package 32-pin TQFP
Product Type Precision LVPECL programmable delay-line IC
Maximum Operating Frequency 1.5 GHz
Programmable Delay Range 3.2 ns to 14.8 ns
Digital Delay Increment 10 ps
Number of Taps 1,024 taps
Digital Control Word 10 bits
Analog Fine-Tune Range Approximately 40 ps
Supply Voltage 2.5 V or 3.3 V
Output Logic LVPECL

Diferensiator Kunci

  • Fine digital delay adjustment (vsSY89296UTI-TR)
  • Combined coarse and continuous tuning (vsSY89296UTI-TR)
  • High-speed differential timing control (vsSY89296UTI-TR)

Catatan Desain

Place the SY89296UTI close to the circuit whose timing must be adjusted, because additional trace length introduces delay and jitter that the calibration process cannot distinguish from the programmed delay. Route the differential input and output signals as a matched pair over a continuous reference plane. Avoid stubs and unnecessary test-point structures on high-speed LVPECL nets, and confirm the final layer stack against the manufacturer layout guidance.

Use the digital control word for repeatable coarse adjustment and reserve analog fine tuning for calibration of approximately 40 ps. Record both settings because a small analog-control change can alter the final edge position. Validate setup time, hold time, jitter, and eye margin at the receiving circuit rather than assuming that a nominal 10 ps control increment is the only timing contribution. Differential LVPECL paths require continuous return paths and controlled impedance.

Decouple the 2.5 V or 3.3 V supply close to the device and follow the manufacturer’s recommended capacitor values and placement. The SY89296UTI supports high-speed differential signaling, so supply-noise coupling can affect the delayed output even when the digital delay setting is correct. Keep power and ground connections short, provide a low-impedance return path, and verify the design for both operating supply conditions and the required temperature range.

Do not treat the SY89296UTI and SY89296UTI-TR ordering expressions as interchangeable without checking the package drawing, tape dimensions, reel orientation, and dry-packing requirements. Also avoid assuming that a generic programmable delay line is a drop-in replacement: the control protocol, 1,024-tap range, 10 ps increment, D[10] cascade function, analog fine-tune control, and LVPECL pinout must all match the target PCB.

Informasi Konformitas

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Bebas Logam Lengket
Unknown
Bebas Halogena
Unknown
Mineral Konflik
Unknown

Compliance attributes were not explicitly identified for the exact SY89296UTI ordering configuration. Confirm RoHS, REACH, lead-free, halogen-free, conflict-minerals, and automotive qualification status with Microchip Technology before production release.

Pencarian Terkait

SY89296UTI datasheet SY89296UTI specifications SY89296UTI pinout SY89296UTI datasheet pdf SY89296UTI equivalent SY89296UTI replacement SY89296UTI cross reference SY89296UTI price SY89296UTI stock Microchip SY89296UTI SY89296UTI 32-TQFP SY89296UTI LVPECL delay line SY89296UTI application circuit SY89296UTI vs SY89296UTI-TR

Komponen dan Istilah Terkait

Microchip Technology SY89296UTI SY89296U SY89296UTI-TR programmable delay line delay-line IC clock and timing IC semiconductor LVPECL differential signaling 1,024 taps 10 ps delay increment 3.2 ns to 14.8 ns delay range analog fine-tune control D[10] cascade control clock phase alignment data recovery timing timing compensation TQFP-32 surface-mount package clock distribution calibration high-speed communication
Kutipan Cepat RFQ
Isi detail lengkap — tim penjualan kami akan membalas dalam 24 jam
Nomor Part Manufaktur Paket QTY Harga Target Lengkap
✓
Kutipan telah disubmit!

Kami akan membalas email Anda dalam 24 jam

1
RFQ Dikirim
2
Kutipan Diterima
3
Order Ditempatkan
4
Pembayaran
5
Dikirim
6
Dikirim
Lihat Detil RFQ