SY89808LTG - 500 MHz 1:9 HSTL Fanout Buffer | Microchip
MPN: SY89808LTG ✓ AktifSY89808LTG Ringkasan
A clock buffer is an integrated circuit that reproduces and distributes a timing signal without imposing excessive loading on its source. Clock and digital logic ICs belong to the broader clock and timing semiconductor category, with applications in processor interfaces, network equipment, test systems, and high-speed digital control. Fanout buffers are especially useful when one source must feed several receivers while preserving edge timing, signal integrity, and electrical loading margins.
The SY89808LTG supports up to 500 MHz operation and includes a triple-buffered enable function. Its 3.3 V core supply operates separately from the 1.8 V output supply, allowing the output-stage voltage to be selected for HSTL-compatible interfaces while the internal circuitry operates from 3.3 V. The nine differential outputs provide a practical means of reducing sensitivity to common-mode noise and accommodating balanced clock distributions.
This device is intended for high-speed clock distribution, data translation, and point-to-point differential signaling. Its input and output stages divide the clock tree into multiple independently routed branches, helping each destination maintain controlled impedance and trace length. The triple-buffered enable function allows the downstream receivers to be placed into a controlled state when clock distribution is not required, which can simplify initialization and reduce unnecessary circuit activity.
Typical uses include high-speed processor clock trees, communications equipment, networking infrastructure, instrumentation, and industrial control systems. It is also suitable where a single clock must feed several chips across a board while maintaining a 500 MHz maximum operating rate. Designers should consider transmission-line behavior, receiver thresholds, clock jitter, and trace length matching when assigning the differential outputs.
Place the SY89808LTG so that each differential pair follows a continuous, impedance-controlled route to its destination. Keep the clock source connections short, maintain symmetry between positive and negative traces, and avoid introducing unnecessary stubs. Because clock quality degrades when rise time, reflections, and crosstalk are not controlled, PCB stackup and receiver requirements should be reviewed before fabrication.
This product page consolidates the manufacturer's principal clock, voltage, package, and signaling specifications with practical PCB guidance. It also distinguishes verified drop-in replacements from parts that merely share a similar clock-buffer function, helping engineers assess replacement risk before changing a released PCB design.
Alternatif penggantian untuk SY89808LTG — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.
SY89808LTG-TR
✅ Drop-In📋 Alternatif referensi (tidak dalam katalog)
SY89808LTG Spesifikasi
| Product Type | Clock fanout buffer and translator |
| Input Configuration | 2 inputs |
| Konfigurasi Output | 9 differential output pairs |
| Fanout Ratio | 2:9 |
| Frekuensi Bawah Maximum | 500 MHz |
| Core Supply Voltage | 3.3 V |
| Output Supply Voltage | 1.8 V |
| Output Logic Standard | Differential HSTL |
| HSTL Receiver Compatibility | 1.5 V compatible |
| Enable Function | Triple-buffered |
| Paket | 32-pin TQFP |
| Tipe Mounting | Surface mount |
SY89808LTG 32-pin tqfp Diamant Konfigurasi Panduan
Konfigurasi pin untuk SY89808LTG (32-pin tqfp pakai pakai). Penomoran pin, fungsi, dan diagram koneksi ditetapkan dalam datasheet produsen. Lihatnya untuk footprint dan pedoman perpindahan paruh.
Tidak ada data diatribut pin yang tersedia untuk SY89808LTG.
Lihat ke: datasheet produk untuk konfigurasi pin penuh.
Aplikasi Umum
SY89808LTG cocok untuk 6 aplikasis: Processor Clock Distribution, Networking Equipment Clock Trees, Differential Signal Translation, High-Speed Test and Measurement Systems, Industrial Control and Data Acquisition, General-Purpose Differential Clock Fanout.
Processor Clock Distribution
The SY89808LTG fits high-speed processor and digital-logic clock trees that require one timing source to feed multiple endpoints. According to the manufacturer datasheet, the device accepts two inputs, provides nine differential HSTL output pairs, and supports a maximum clock frequency of 500 MHz. Place it near the clock source, then route each branch as a controlled-impedance differential pair. The separate 3.3 V core and 1.8 V output supplies permit the core logic and output swing to use their documented voltage levels. Designers should confirm receiver thresholds, allowable clock skew, jitter, and branch-length tolerance for the target processor before release.
Networking Equipment Clock Trees
The SY89808LTG can distribute a high-speed differential clock across multiple sections of a networking or communications board. Its 2:9 configuration, nine differential HSTL output pairs, and 500 MHz maximum operating frequency are useful when several line cards, transceivers, or controller groups need a related timing reference. Each output should use a continuous impedance-controlled route, with matched lengths within the receiver system's allowed tolerance. Because fanout buffers can amplify timing-budget limitations rather than correct them, engineers should verify source jitter, output skew, receiver setup and hold requirements, and channel loss before assigning the device to a production topology.
Differential Signal Translation
The SY89808LTG also fits interface circuits that require differential HSTL translation and fanout rather than a simple single-ended clock copy. According to the manufacturer datasheet, the device uses a 3.3 V core supply and a separate 1.8 V output supply while producing nine 1.5 V-compatible differential output pairs. That architecture can help interface a clock or control signal to compatible receivers while isolating the source from fanout loading. Validate signal thresholds, edge rate, return loss, and termination at each destination because translator operation alone does not guarantee compliance with the complete system interface specification.
High-Speed Test and Measurement Systems
In test and measurement equipment, the SY89808LTG can distribute a clock to multiple acquisition, conversion, or synchronization sections. According to the manufacturer datasheet, its maximum clock frequency is 500 MHz and it provides nine differential HSTL output branches, allowing a compact clock tree to replace multiple repetitive driver stages. Use the triple-buffered enable function during initialization or test sequencing where supported by the system architecture. Precision instruments still require careful attention to clock jitter, deterministic and random noise, output skew, channel attenuation, and calibration; the buffer should be treated as a timing distribution element rather than a cure for an inaccurate source reference.
Industrial Control and Data Acquisition
The SY89808LTG is appropriate for industrial control and data-acquisition boards that need one clock to serve multiple digital engines while retaining differential signaling. According to the manufacturer datasheet, the device supports 500 MHz operation and offers a 2:9 topology with nine HSTL output pairs. Place the device near the source clock and isolate high-current switching regions to reduce coupled noise. Verify the industrial environment's temperature requirement, grounding strategy, isolation boundaries, and connector-driven edge degradation. If the system uses a lower clock rate, the enable function can help control downstream receiver state, but power-state timing must be checked against every attached integrated circuit.
General-Purpose Differential Clock Fanout
The SY89808LTG can serve as a general-purpose differential clock fanout when a board needs repeatable outputs rather than a single-ended multi-load clock net. According to the manufacturer datasheet, the 32-pin TQFP device delivers nine differential HSTL output pairs from two inputs, with a 3.3 V core and 1.8 V output supply architecture. Routing each output through matched transmission-line geometry helps preserve edge quality and reduce loading on the source. Establish the expected load, termination method, maximum operating frequency, and acceptable skew before layout because a nominally identical clock at the output pins can still produce different receiver results when channel lengths and losses vary.
Data referensi engineering untuk SY89808LTG — pembandingan, panduan desain, dan informasi konformitas.
Panduan Pemilihan
Pembandingan dengan Alternatif
| Parameter Umum | Produk Ini |
|---|---|
| Manufacturer | Microchip Technology |
| Package | 32-pin TQFP |
| Product Type | Clock fanout buffer and translator |
| Input Configuration | 2 inputs |
| Output Configuration | 9 differential output pairs |
| Fanout Ratio | 2:9 |
| Maximum Clock Frequency | 500 MHz |
| Core Supply Voltage | 3.3 V |
| Output Supply Voltage | 1.8 V |
| Output Logic Standard | Differential HSTL |
| Enable Function | Triple-buffered |
Catatan Desain
Route each differential output as a coupled, controlled-impedance pair and maintain symmetry between the positive and negative traces. Avoid stubs, unmatched branch transitions, and changes in reference-plane geometry that could increase reflections. The nine output branches should be planned independently so their loss, length, and termination characteristics remain compatible with the receiver timing budget.
Validate clock-edge degradation from source to receiver rather than relying only on the nominal 500 MHz operating limit. Include channel loss, receiver threshold, clock-jitter, output-skew, and timing-margin effects in simulation or measurement. Differential routing reduces susceptibility to common-mode noise but does not remove the need to control return paths, impedance discontinuities, and pair-length mismatch.
Provide the 3.3 V core and 1.8 V output rails as separate, cleanly decoupled supplies. Place bypass capacitors close to the corresponding supply and ground pins using the manufacturer application layout, and verify startup sequencing if the triple-buffered enable is controlled. Do not assume that the output rail can safely operate from the core rail or that both rails may ramp in any order without checking the device requirements.
Use the 32-pin TQFP land pattern, exposed-pad treatment, and soldering profile specified for the exact Microchip ordering code. The absence of a verified public pin diagram in the available documentation requires the manufacturer pin-description table and package drawing to remain the authoritative references for PCB routing and assembly.
Informasi Konformitas
No specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declaration is identified in the available product documentation.