XC7A100T-L1CSG324I - 101,440-LC FPGA | AMD | Industrial
MPN: XC7A100T-L1CSG324I ✓ AktifXC7A100T-L1CSG324I Ringkasan
An FPGA is a programmable logic device that combines configurable logic blocks, block RAM, digital signal processing resources, programmable I/O, and dedicated clocking resources on one semiconductor device. The Artix-7 family combines these resources in a 28 nm architecture for designs requiring substantial parallel processing, flexible interfaces, and reconfigurable hardware. Unlike a fixed-function microcontroller or DSP, an FPGA can implement custom protocols, control logic, data pipelines, and interface bridges in parallel.
The XC7A100T-L1CSG324I provides 210 I/Os and 101,440 logic cells, making it suitable for industrial control, communications, embedded vision, test equipment, and signal-processing systems. Its 4,860 Kbit of block RAM supports packet buffering, data acquisition, display frame storage, and general-purpose on-chip data handling. The -40°C to +100°C temperature designation supports extended-temperature industrial equipment when the complete system meets its own environmental requirements.
The device uses the Artix-7 28 nm process technology and provides dedicated resources for clock management, high-speed serial links, block RAM, digital signal processing, and general-purpose logic. Clocking resources allow multiple internal domains to be generated and constrained, while dedicated memory and DSP blocks improve resource efficiency compared with implementing the same functions entirely in programmable logic. Exact timing, configuration, power, and electrical limits must be evaluated against the AMD Artix-7 data sheet for the selected ordering code.
Typical uses include industrial Ethernet and serial interface bridges, programmable logic controllers, camera and sensor data pipelines, motion-control systems, network appliances, and portable test instruments. The 210 available I/Os support external memory interfaces, high-speed transceivers, clocks, control signals, and application-specific connectors when the selected bank voltages and speed grades satisfy the design constraints.
PCB implementation requires careful treatment of the 324-ball CSPBGA footprint, power rails, decoupling, configuration pins, clocking, and high-speed routing. Preserve the exact device ordering code in fabrication documentation, validate every bank voltage against the selected I/O standard, and complete bitstream recompilation and timing analysis whenever the FPGA MPN or configuration changes.
This page combines the exact ordering-code characteristics, compatible Artix-7 alternatives, comparison parameters, and practical implementation guidance needed to assess whether the XC7A100T-L1CSG324I can be used without changing the intended CSG324 PCB footprint.
Alternatif penggantian untuk XC7A100T-L1CSG324I — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.
Variasi di dalam seri ini
Model-series yang sama yang kompatibel dengan penggantian XC7A100T-L1CSG324I (sama faktor bentuk dan footprint) — berbeda di dalam Package, Logic Cells, Mounting Type, Operating Temperature, RoHS Status.
XC7A100T-1CSG324I
✅ Drop-In✓ Ada di Gudang
$59.9 / Satuan
Lihat Datasheet →XC7A100T-2CSG324I
✅ Drop-In✓ Ada di Gudang
$105 / Satuan
Lihat Datasheet →XC7A100T-3CSG324I
✅ Drop-In📋 Alternatif referensi (tidak dalam katalog)
XC7A100T-1CSG324C
✅ Drop-In✓ Ada di Gudang
$59.9 / Satuan
Lihat Datasheet →XC7A100TL-1CSG324I
✅ Drop-In📋 Alternatif referensi (tidak dalam katalog)
XC7A100T-L1CSG324I Rating Maksimal & Karakteristik Listrik
| Device Type | Artix-7 FPGA |
| Logic Cells | 101,440 cells |
| Programmable I/O | 210 I/Os |
| Block RAM | 4,860 Kbit |
| Total Internal Bits | 4,976,640 bits |
| Paket | 324-ball CSPBGA (CSG324) |
| Process Technology | 28 nm |
| Suhu Kerja | -40°C to +100°C |
| Device Family | Artix-7 |
| Programmable Logic Type | FPGA |
| Status RoHS | Compliant |
| Tipe Mounting | Surface-mount CSPBGA |
| Package Ball Count | 324 balls |
XC7A100T-L1CSG324I 324 balls Diamant Konfigurasi Panduan
Konfigurasi pin untuk XC7A100T-L1CSG324I (324 balls pakai pakai). IC digital ini termasuk GPIO, antarmuka komunikasi (UART, SPI, I2C), dan pin kuasa. Lihat datasheet produsen untuk fungsi pin alternatif dan opsi konfigurasi. Penting untuk desain sistem pengemasan dan PCB.
Tidak ada data diatribut pin yang tersedia untuk XC7A100T-L1CSG324I.
Lihat ke: datasheet produk untuk konfigurasi pin penuh.
Aplikasi Umum
XC7A100T-L1CSG324I cocok untuk 6 aplikasis: Industrial Programmable Logic Controller, Industrial Ethernet and Protocol Bridge, High-Speed Data Acquisition, Embedded Vision and Sensor Processing, Programmable Test and Measurement, Aerospace and Defense Control Prototype.
Industrial Programmable Logic Controller
The XC7A100T-L1CSG324I suits industrial PLC and machine-control platforms that combine deterministic control logic with multiple communication and sensor interfaces. Its 101,440 logic cells provide substantial parallel capacity for sequencing, motion control, safety interlocks, and protocol engines, while 210 I/Os support encoders, discrete sensors, actuators, counters, and field buses. The -40°C to +100°C rating fits extended-temperature industrial equipment. Engineers should reserve enough logic and routing for diagnostics, and validate every timing-critical path with post-route analysis at the operating voltage and temperature corners.
Direkomendasikan
Industrial Ethernet and Protocol Bridge
The XC7A100T-L1CSG324I can implement concurrent Ethernet-facing datapaths, frame filters, protocol converters, and host interfaces in one programmable device. The 4,860 Kbit of block RAM provides dedicated capacity for packet buffering, while the 101,440 logic cells support parallel header parsing and traffic management. Its 210 I/Os allow integration with external PHYs, memories, status signals, and configuration interfaces. Use dedicated clocking resources for multiple traffic domains, constrain them accurately, and account for line-rate packet timing rather than relying only on fabric timing.
Direkomendasikan
High-Speed Data Acquisition
For instrumentation and industrial data-acquisition systems, the XC7A100T-L1CSG324I can capture parallel or serial sensor data, apply real-time filtering, and transfer results to memory or host logic. Its programmable logic resources support multiple acquisition channels and digital processing pipelines, while 4,860 Kbit of block RAM can stage samples and implement dual buffers. The 210 I/Os provide connections to converters, clocks, triggers, and memory. Designers should analyze input timing, buffer utilization, clock jitter, and data-conversion latency together because nominal logic-cell counts alone do not determine acquisition performance.
Direkomendasikan
Embedded Vision and Sensor Processing
The XC7A100T-L1CSG324I is appropriate for parallel sensor-processing nodes that must combine image acquisition, thresholding, filtering, feature extraction, and downstream control. The Artix-7 logic fabric can execute several pipeline stages concurrently, and 4,860 Kbit of block RAM can buffer short image regions or multi-line data. The 210 I/Os allow direct attachment to sensors, serializers, memory, and display-control logic. Power planning is important because sustained parallel pipelines can increase dynamic current; use realistic activity assumptions and verify thermal margin across the -40°C to +100°C operating range.
Direkomendasikan
Programmable Test and Measurement
The XC7A100T-L1CSG324I can consolidate stimulus generation, pattern execution, capture logic, protocol analysis, and instrument control into a compact FPGA platform. Its 101,440 logic cells support multiple concurrent channels, while 4,860 Kbit of block RAM accommodates captured samples, correlation windows, and protocol buffers. The 210 I/Os permit flexible integration with test fixtures, trigger lines, clock sources, and high-speed acquisition devices. Engineers should use constrained clocking and I/O timing, preserve deterministic routing where measurement accuracy depends on it, and validate trigger latency across voltage and temperature corners.
Direkomendasikan
Aerospace and Defense Control Prototype
The XC7A100T-L1CSG324I can support prototype control, telemetry-processing, and interface-conversion systems where programmable logic and configurable I/O are valuable. Its 101,440 logic cells and 4,860 Kbit of block RAM allow sophisticated control pipelines and local buffering, while the 210 I/Os support external converters, clocks, memory, and redundant interfaces. The -40°C to +100°C industrial temperature rating supports harsh-environment development, but it does not itself establish aerospace qualification. Program qualification, radiation requirements, reliability evidence, and controlled configuration processes must be assessed separately.
Direkomendasikan
Ringkasan Produk Direkomendasikan
Data referensi engineering untuk XC7A100T-L1CSG324I — pembandingan, panduan desain, dan informasi konformitas.
Panduan Pemilihan
Pembandingan dengan Alternatif
| Parameter Umum | Produk Ini | XC7A100T-1CSG324I | XC7A100T-2CSG324I | XC7A100T-3CSG324I | XC7A100T-1CSG324C | XC7A100TL-1CSG324I |
|---|---|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| Package | CSG324 (324-ball CSPBGA) | CSG324 (324-ball CSPBGA) - same | CSG324 (324-ball CSPBGA) - same | CSG324 (324-ball CSPBGA) - same | CSG324 (324-ball CSPBGA) - same | CSG324 (324-ball CSPBGA) - same |
| Device Family | Artix-7 | Artix-7 | Artix-7 | Artix-7 | Artix-7 | Artix-7 |
| Logic Cells | 101,440 cells | 101,440 cells | 101,440 cells | 101,440 cells | 101,440 cells | 101,440 cells |
| Process Technology | 28 nm | 28 nm | 28 nm | 28 nm | 28 nm | 28 nm |
| Ordering Code | XC7A100T-L1CSG324I | XC7A100T-1CSG324I | XC7A100T-2CSG324I | XC7A100T-3CSG324I | XC7A100T-1CSG324C | XC7A100TL-1CSG324I |
Diferensiator Kunci
- Extended-temperature Artix-7 resource set in the CSG324 package (vsXC7A100T-1CSG324C)
- Substantial logic capacity for parallel industrial functions (vsXC7A100T-1CSG324I)
- Dedicated on-chip memory for buffering and data pipelines (vsXC7A100T-2CSG324I)
- Package-compatible migration path within the same FPGA family (vsXC7A100T-3CSG324I)
Catatan Desain
Treat the CSG324 land pattern as a tightly controlled BGA layout rather than a generic 324-ball footprint. Cross-check every ball against the AMD CSG324 package files, including power, ground, configuration, clock, and reserved positions. Preserve the package outline, ball pitch, solder-mask definition, and paste layers under the controlled assembly process. Because a replacement can share the same package while changing speed or temperature ordering, record the complete device MPN in schematic, BOM, firmware configuration, and production-test documentation.
Plan each Artix-7 supply rail with both static and dynamic-current margin. Decoupling must follow the values and placement guidance in the AMD Artix-7 data sheet, with local bulk and high-frequency capacitance distributed according to the selected power architecture. Separate clean and noisy return paths where practical, provide adequate source impedance, and check startup sequencing across the full -40°C to +100°C range. Do not base the power design on a single typical-current figure because utilization and activity can materially change demand.
Separate clock, configuration, high-speed serial, and general-purpose I/O routing according to the AMD design guidelines. Use the dedicated clock-capable pins and pinout files when assigning clock inputs, and keep sensitive configuration paths away from noisy interfaces. Differential pairs require controlled length, impedance, and reference-plane continuity rather than visual matching alone. After placement, run complete DRC and timing sign-off using the exact XC7A100T-L1CSG324I device model; a package-compatible alternative can still have different timing constraints.
Do not treat the CSG324 package alone as proof that two FPGA order codes are interchangeable. Verify the exact ordering suffix, operating-temperature grade, speed class, configuration behavior, power limits, and approved migration path. A changed device can require a new bitstream even when the PCB is unchanged. Run post-route timing analysis, perform configuration and startup tests, validate clock margins and I/O compliance, and complete a hardware regression before authorizing a substitution for production.
Informasi Konformitas
The XC7A100T-L1CSG324I listing identifies the device as RoHS compliant. No verified Reach, halogen-free, conflict-minerals, or automotive-qualification statement was provided for this exact ordering code.