マイクロコントローラ

製品 (19,000+)

LPC1767FBD100K - 100MHz Cortex-M3 512KB MCU | NXP
LPC1767FBD100K

LPC1767FBD100K - 100MHz Cortex-M3 512KB MCU | NXP

NXP LPC1767FBD100K is a 32-bit ARM Cortex-M3 microcontroller rated at 100 MHz, with 512 KB of flash memory, 64 KB of SRAM, and an Ethernet MAC, supplied in a 100-pin LQFP package measuring 14 x 14 mm. The device combines four UARTs, three SSP/SPI interfaces, three I2C interfaces, I2S support, an eight-channel 12-bit ADC, a 10-bit DAC, motor-control PWM, a quadrature encoder interface, and an eight-channel DMA controller. A microcontroller is a semiconductor integrated circuit dedicated to embedded control. Its hierarchy extends from an embedded processor to a microcontroller, an ARM Cortex-M3 core, and finally a general-purpose microcontroller with integrated flash, SRAM, analog converters, and communication peripherals. The LPC1767 therefore combines general-purpose firmware execution with multiple peripheral engines that reduce the need for separate interface components in connected embedded equipment. The LPC1767 family is positioned for embedded applications requiring high integration and low power consumption. Its 100 MHz Cortex-M3 processor provides substantially more arithmetic capability than an 8- or 16-bit control MCU while retaining the deterministic peripheral architecture useful for communications, data acquisition, and motor-control systems. The 512 KB program memory supports a larger embedded code base than devices with only tens or hundreds of kilobytes of flash, while 64 KB of SRAM accommodates working buffers and protocol stacks. Communication capability is a major feature. The integrated Ethernet MAC supports networked embedded designs, while the four UARTs, three SSP/SPI interfaces, three I2C interfaces, and I2S interface cover serial links to sensors, converters, storage, displays, and audio devices. The eight-channel 12-bit ADC and 10-bit DAC support analog measurement and signal generation. An eight-channel DMA controller can transfer data between peripherals and memory, reducing CPU involvement in data movement. Typical LPC1767 applications include industrial Ethernet equipment, data acquisition modules, building-control gateways, communications equipment, motor controllers, and embedded test systems. It is particularly useful when several serial interfaces and analog channels must coexist on one controller. The 100-LQFP package exposes the extensive pin set but requires a substantially larger PCB footprint than a small-outline package. For a new PCB, preserve the LPC1767FBD100K footprint and verify every Ethernet, analog, power, and boot-strapping connection against the manufacturer pinout. Do not treat a related LPC17xx device as an automatic replacement because memory size, CAN availability, peripheral options, or pin multiplexing may differ. For an assembled board, verify the exact suffix, Ethernet implementation, power rails, crystal circuit, and boot configuration before sourcing a replacement. This page consolidates manufacturer and distributor information, package characteristics, interface capabilities, and practical replacement guidance. It distinguishes verified LPC1767FBD100K facts from unavailable details and identifies alternatives that require explicit pin, peripheral, and firmware validation before production use.

見積もり お問い合わせ
LPC1768FBD100K - 100MHz Cortex-M3 512KB Flash MCU | NXP
LPC1768FBD100K

LPC1768FBD100K - 100MHz Cortex-M3 512KB Flash MCU | NXP

The NXP Semiconductors LPC1768FBD100K is an ARM Cortex-M3 32-bit microcontroller with a 100 MHz core, 512 KB of on-chip flash memory and 64 KB of SRAM, integrated in a 100-lead LQFP (14 x 14 mm) surface-mount package. It operates from a single 2.4 V to 3.6 V supply and adds an Ethernet MAC, a USB Device/Host/OTG controller, an 8-channel DMA engine and 8-channel 12-bit ADC. What is an ARM Cortex-M3 microcontroller? A microcontroller is a single integrated circuit containing a processor core, memory and peripherals on one die. The Cortex-M3 is a 32-bit ARM processor architecture designed for embedded control: it uses the Thumb instruction set, has no separate cache or memory-management unit, and delivers deterministic interrupt-driven performance at low power. Within the hierarchy, the LPC1768 belongs to the LPC17xx family of NXP microcontrollers, which sit between simple 8-bit MCUs and higher-end Cortex-M4/M7 application processors. Key features of the LPC1768 include 512 KB (512K x 8) flash program memory, 64 KB of data SRAM, an 8-channel 12-bit successive-approximation ADC, a single 10-bit DAC, four UARTs, two CAN 2.0B controllers, three SSP/SPI interfaces, three I2C interfaces, an I2S interface, motor-control PWM and an Ethernet MAC with MII/RMII. The 8-channel DMA controller allows peripheral transfers to run with minimal CPU intervention. Technically, the device pairs the Cortex-M3 core with a nested vectored interrupt controller for fast, prioritized event handling, and provides a 100 MHz maximum CPU clock from an internal or external oscillator. The integrated Ethernet MAC supports 10/100 Mb/s traffic, and the USB controller can operate as Device, Host or OTG, making the part suitable for gateway, data-logger and connected-instrument designs without a discrete USB or Ethernet PHY. Typical applications include industrial Ethernet gateways, USB-to-serial and protocol converters, motor and motion controllers using the PWM and CAN channels, data acquisition and test equipment using the 12-bit ADC, and networked sensor nodes using the Ethernet MAC with the 10/100 Mb/s PHY. A key design consideration is that the LQFP-100 (14 x 14 mm) footprint demands careful escape routing: with a 0.5 mm pitch, high-speed USB and Ethernet differential pairs need continuous reference planes and short, symmetric traces, and decoupling should be placed directly at each VDD pin. This page consolidates distributor pricing, verified drop-in alternatives from the NXP LPC17xx family, a parameter-by-parameter comparison table and practical PCB design notes that are not found together in the manufacturer datasheet.

見積もり お問い合わせ
LPC1768UKJ - 32-Bit 100MHz Cortex-M3 MCU | NXP
LPC1768UKJ

LPC1768UKJ - 32-Bit 100MHz Cortex-M3 MCU | NXP

The NXP Semiconductors LPC1768UKJ is a 32-bit ARM Cortex-M3 microcontroller operating at 100 MHz, with 512 KB of flash memory in a 100-TFBGA (9x9 mm) package. It is designed for connected embedded systems that require broad peripheral integration and low power consumption. The verified distributor listing identifies the device as part of the LPC17xx family and specifies a 100-pin thin-film ball grid array package. A microcontroller is a programmable system-on-chip that combines a processor core, nonvolatile program memory, volatile data memory, and peripherals such as serial interfaces and communications controllers. The ARM Cortex-M3 architecture provides a compact instruction set suited to real-time control, while the LPC1768 platform integrates connectivity-oriented peripherals into one component. In the electronics hierarchy, this part is a microcontroller, or MCU, within the broader semiconductor and embedded-processing categories. The principal verified specifications are a 100 MHz maximum operating frequency, 512 KB of flash organized as 512K x 8, a 32-bit ARM Cortex-M3 core, and a 100-TFBGA package measuring 9 x 9 mm. These characteristics make the LPC1768UKJ suitable for control-intensive equipment requiring substantial local program storage and a compact, high-pin-count surface-mount footprint. The availability of Ethernet, USB, and CAN is identified in the family-level datasheet result, although detailed interface operating limits are not provided in the supplied target-page data. The LPC1768 family integrates extensive on-chip peripherals to reduce external component count and board area. The family description emphasizes high integration and peripheral support for embedded applications, while the LPC1768UK product-page result identifies migration compatibility within the LPC1700 family. Designers should nevertheless verify the exact peripheral pin assignments, electrical limits, and package ball map for LPC1768UKJ against the manufacturer documentation before releasing a PCB. Typical applications include industrial control, networked embedded equipment, USB-connected peripherals, automotive or transportation electronics, communications infrastructure, and compact consumer products. The 512 KB flash capacity provides room for networking stacks, protocol handlers, control firmware, and application logic, while the 100 MHz Cortex-M3 core supports deterministic multitasking and peripheral servicing. A critical design consideration is the fine-pitch 100-TFBGA footprint. PCB layout must provide adequate escape routing, power and ground distribution, and manufacturing capability for the package. Firmware developers must also configure clocks, pins, memory, and peripherals for the exact LPC1768UKJ variant rather than relying only on generic LPC1768 documentation. This page combines the verified distributor description, family-level technical context, package information, sourcing details, and engineering-oriented selection guidance. It is intended to help engineers identify the correct MCU, plan a compatible board, and distinguish verified facts from details that still require confirmation in the official documentation.

見積もり お問い合わせ
LPC1768UKZ - 100MHz Cortex-M3 MCU with 512KB Flash | NXP
LPC1768UKZ

LPC1768UKZ - 100MHz Cortex-M3 MCU with 512KB Flash | NXP

The NXP Semiconductors LPC1768UKZ is a 100 MHz, 32-bit ARM Cortex-M3 microcontroller with 512 KB flash memory, 64 KB data memory, Ethernet MAC, USB, and extensive serial peripherals in a 100-ball BGA package. The UKZ package option and integrated connectivity target industrial, communications, control, and embedded data-acquisition systems where a high pin count and compact footprint are valuable. It combines a single Cortex-M3 core with an 8-channel 12-bit ADC, 10-bit DAC, four UARTs, two CAN channels, three SSP/SPI interfaces, three I²C interfaces, I²S, DMA, and motor-control PWM. An ARM Cortex-M3 microcontroller is a 32-bit embedded processor designed around the ARM Cortex-M3 instruction set, combining deterministic interrupt handling, compact code execution, and extensive peripheral integration. In the product hierarchy, the LPC1768UKZ is a microcontroller MCU and embedded processor within the broader semiconductor category. Its 512 KB flash supports embedded firmware, while 64 KB of data memory supports working storage. NXP describes the LPC1768 family as a scalable mainstream solution for embedded applications requiring high integration and low power consumption at frequencies up to 100 MHz. The principal differentiators are the combination of 100 MHz operation, 512 KB flash, Ethernet MAC, USB Device/Host/OTG, eight-channel DMA, and a broad peripheral set in one device. The 8-channel 12-bit ADC supports multiple analog inputs without requiring an external converter, while the 10-bit DAC provides an on-chip analog output for control or signal-generation tasks. Four UARTs, two CAN channels, three SSP/SPI interfaces, three I²C interfaces, and I²S reduce the need for external communication controllers. Motor-control PWM further supports actuator and power-control designs. The supplied NXP product information confirms the LPC1768UK family identity, while distributor records identify LPC1768UKZ as the ordering variant associated with a 100-pin, 3.3 V device. Exact voltage ranges, pin assignments, current limits, package dimensions, temperature limits, and clock-tree details require confirmation in the manufacturer datasheet because those values are not fully included in the supplied search extracts. The LPC1768UKZ should therefore be selected against the complete datasheet and board-level requirements before release to production. Typical applications include industrial Ethernet controllers, USB-connected embedded systems, CAN-based automation equipment, motor-control systems, data loggers, communications equipment, and multi-channel sensor acquisition systems. The combination of Ethernet, USB, CAN, high-speed serial interfaces, and analog conversion allows a compact design to consolidate several functions normally distributed across separate ICs. This is particularly useful for industrial controllers, building-automation equipment, test systems, and connected embedded products. A critical design consideration is package and PCB verification. The LPC1768UKZ uses a high-pin-count BGA package according to distributor records, so escape routing, via-in-pad or fanout strategy, exposed-pad handling, assembly capability, and thermal performance must be confirmed before layout release. Software migration should also account for peripheral-instance names, clock configuration, pin multiplexing, startup code, and the exact Cortex-M memory map. This page consolidates the verified NXP family specifications, distributor package identification, pricing references, and application guidance. It distinguishes confirmed facts from missing datasheet details and avoids treating search-snippet information as a complete electrical characterization. Engineers should use the manufacturer datasheet for final pinout, timing, power, EMC, and qualification decisions.

見積もり お問い合わせ
LPC1778FBD144K - 120MHz Cortex-M3 MCU with Ethernet | NXP
LPC1778FBD144K

LPC1778FBD144K - 120MHz Cortex-M3 MCU with Ethernet | NXP

The NXP Semiconductors LPC1778FBD144K is a 32-bit Arm Cortex-M3 microcontroller with a 120 MHz clock, 512 kB of embedded flash memory, 96 kB of SRAM, integrated Ethernet, and USB 2.0 device, host, and OTG support in a 144-pin LQFP package. It combines extensive connectivity and mixed-signal peripherals with an 8-channel DMA controller and low-power operation for embedded industrial, communications, audio, and motor-control systems. An Arm Cortex-M3 microcontroller belongs to the microcontroller hierarchy: embedded processor > microcontroller > 32-bit MCU > Arm Cortex-M3 device. This architecture provides a deterministic execution environment with interrupt-driven peripherals while retaining low power consumption and broad ecosystem support. The LPC1778 is positioned for connected embedded designs requiring more communication interfaces than a basic microcontroller but fewer resources than a high-end application processor. Key features include 512 kB of flash, 96 kB of data memory, Ethernet, USB 2.0 device, host, and OTG, an 8-channel DMA controller, five UARTs, two CAN channels, three SSP or SPI interfaces, three I2C interfaces, I2S support, and SD or MMC connectivity. An 8-channel 12-bit ADC and 10-bit DAC support mixed-signal measurement and output, while quadrature encoder inputs support motor and position-control applications. The LPC1778 integrates multiple communications engines around the Cortex-M3 core. Ethernet and USB enable network-connected control equipment and USB peripherals, while CAN, UART, SPI, I2C, and I2S support industrial networking, sensor networks, audio paths, and external memory or display peripherals. DMA reduces CPU intervention for transfers between memory and high-bandwidth peripherals, improving responsiveness in data-acquisition and communications systems. Typical applications include industrial Ethernet controllers, USB-to-serial or USB-to-field-bus gateways, audio interfaces, CAN-based vehicle or machine-control nodes, SD-card data loggers, motor-control systems, and compact industrial gateways. The 144-pin LQFP package exposes the broad peripheral complement without requiring the smallest possible package, simplifying PCB routing and inspection. Designers should verify the exact pin multiplexing, clock configuration, power-supply requirements, decoupling values, and startup limits against the NXP datasheet before layout. Although the 120 MHz operating frequency provides strong processing headroom, sustained Ethernet, USB, and DMA activity should be evaluated for interrupt latency, thermal conditions, and continuous bus bandwidth rather than inferred from peak clock speed alone. This page consolidates verified manufacturer and distributor information with package-specific alternatives, interface-focused comparisons, and practical selection guidance. It is designed to help engineers determine whether the LPC1778FBD144K provides the required memory, networking, and mixed-signal resources without confusing it with pin-compatible but feature-incompatible microcontroller options.

見積もり お問い合わせ
LPC1778FBD208K - 120MHz Cortex-M3 MCU with 512KB Flash | NXP
LPC1778FBD208K

LPC1778FBD208K - 120MHz Cortex-M3 MCU with 512KB Flash | NXP

NXP Semiconductors LPC1778FBD208K is a 120 MHz Arm Cortex-M3 microcontroller with 512 kB of flash memory, 96 kB of data memory, and a 208-pin LQFP package. The device combines Ethernet, USB 2.0 device, host and OTG support, an 8-channel DMA controller, 5 UARTs, 2 CAN channels, 3 SSP/SPI interfaces, 3 I2C interfaces, I2S, an 8-channel 12-bit ADC, a 10-bit DAC, QEI, SD/MMC, and motor-control capabilities. It is designed for embedded systems requiring high integration, low power consumption, and extensive connectivity in a single 28 mm by 28 mm package. A microcontroller is a programmable semiconductor that combines a processor core, memory, and peripheral interfaces on one integrated circuit. The LPC1778 belongs to the Arm Cortex-M3 microcontroller, 32-bit embedded-controller, and integrated-circuit hierarchy. Its Cortex-M3 core operates at up to 120 MHz, allowing real-time control and network-oriented embedded workloads to share one controller while reducing the number of discrete components required on the board. Key features include 512 kB of flash for firmware, 96 kB of SRAM for working memory, and the extensive communication peripheral set listed by NXP. The integrated Ethernet and USB 2.0 interfaces support connected equipment without requiring separate controllers. Five UARTs, two CAN channels, three SSP/SPI interfaces, three I2C interfaces, and I2S provide options for sensors, displays, industrial buses, storage, audio, and communications links. The 8-channel 12-bit ADC and 10-bit DAC support mixed-signal measurement and control. The 208-pin LQFP package exposes the device’s broad I/O and interface resources, including Ethernet, USB, CAN, serial buses, analog channels, motor-control signals, and external-memory interfaces. This high pin count is valuable when a system needs many independently connected peripherals without multiplexing several functions through a smaller package. Its 32-bit architecture and 120 MHz operating frequency provide ample compute performance for protocol handling, data acquisition, motor control, and supervisory tasks. Typical uses include industrial automation and factory equipment, networked embedded controllers, USB-to-Ethernet gateways, motor-control systems, data-acquisition equipment, and communications infrastructure. Ethernet and USB make it appropriate for supervisory controllers or gateways, while the CAN, serial, and analog interfaces can connect sensors and actuators. The integrated ADC, DAC, QEI, and motor-control features also suit position and closed-loop control applications. A critical design consideration is the 208-pin package’s routing and decoupling requirements. Place the required power and bypass capacitors close to their associated supply pins, provide a clean 3.3 V rail as identified by the verified distributor information, and route high-speed Ethernet and USB signals with controlled impedance and continuous reference planes. Firmware should also validate startup, clock configuration, memory mapping, and peripheral initialization before enabling external actuators. This page consolidates verified NXP and distributor information, interface details, application fit, and design guidance into one engineering-focused product record. It also distinguishes exact drop-in alternatives from broader functional equivalents, helping procurement and engineering teams avoid treating pin-compatible replacements and redesign-level substitutions as interchangeable.

見積もり お問い合わせ
LPC1788FBD144 - ARM Cortex-M3 MCU 512KB Flash 144-LQFP | NXP
LPC1788FBD144

LPC1788FBD144 - ARM Cortex-M3 MCU 512KB Flash 144-LQFP | NXP

The NXP Semiconductors LPC1788FBD144 is an ARM Cortex-M3 based 32-bit microcontroller with 512 KB flash and 96 KB SRAM, operating at up to 120 MHz in a 144-pin LQFP (20x20 mm) package. It features USB Device/Host/OTG, on-chip Ethernet MAC, an LCD controller, and 119 GPIO, packaged as LQFP-144 for high-density integration. According to the NXP product page, it is offered in the LQFP144 footprint. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, memory, and programmable peripherals. The Cortex-M3 is a 32-bit RISC processor core designed by ARM for deterministic, low-latency embedded applications. It sits in the broader hierarchy of microcontrollers -> embedded processors -> semiconductors. LDOs themselves are voltage regulators, but in this case LPC1788FBD144 is a microcontroller, not an LDO - clarification is important because the LPC17xx family is sometimes confused with the TPS7A4701 LDO family due to similar prefix letters. Key features of the LPC1788FBD144 include up to 120 MHz CPU clock, 512 KB on-chip flash program memory, 96 KB SRAM, an 8-channel DMA controller, an external memory controller (EMC), USB 2.0 full-speed Device/Host/OTG, 10/100 Ethernet MAC, an LCD controller supporting TFT panels up to 1024x768, CAN, I2C, I2S, SPI, UART, 12-bit ADC, 10-bit DAC, PWM, and a Real-Time Clock (RTC). Per the NXP product page summary, the part is supplied from a 2.4 V to 3.6 V rail and integrates an Ethernet MAC and USB PHY on chip. The LPC1788FBD144 uses an ARM Cortex-M3 core with a 3-stage pipeline, hardware single-cycle multiply, and Tail-Chaining interrupt controller that reduces interrupt latency. The 96 KB SRAM is split between general use and SRAM bytes, with the bytes portion (typically 4 KB) retained in low-power modes for RTC backup. The Ethernet MAC supports MII/RMII interfaces to an external PHY, while the EMC allows expansion with external SRAM, NOR flash, or SDRAM. Typical applications for the LPC1788FBD144 include industrial HMI panels with TFT displays, building automation gateways, point-of-sale terminals, embedded data loggers, and USB/Ethernet-connected embedded controllers. The combination of large SRAM, integrated Ethernet and USB, and an LCD controller makes it particularly suited to graphics-rich industrial products. Designers should note that the 144-LQFP package has a relatively large 20x20 mm footprint and 0.5 mm pitch, requiring careful PCB layout for the high-speed Ethernet MII/RMII traces. Power supply decoupling is critical at the 3.3 V main and 1.2 V core rails, and the EMC bus must be length-matched for SDRAM. This page synthesizes distributor pricing, drop-in NXP family alternatives, and practical design notes that are not aggregated in the manufacturer datasheet.

見積もり お問い合わせ
LPC1788FBD208K - 120MHz Cortex-M3 MCU | NXP Semiconductors
LPC1788FBD208K

LPC1788FBD208K - 120MHz Cortex-M3 MCU | NXP Semiconductors

The NXP Semiconductors LPC1788FBD208K is a high-performance 32-bit Arm Cortex-M3 microcontroller with a maximum operating frequency of 120 MHz, 512 kB of embedded flash memory, and 96 kB of data memory. It is offered in a 208-pin LQFP package measuring 28 mm by 28 mm and operates from a 3.3 V supply. The device integrates extensive communications and data-acquisition peripherals for industrial, networking, medical, and consumer embedded systems. A microcontroller is a programmable semiconductor that integrates a processor core, memory, and peripherals on one integrated circuit. The LPC1788 belongs to the Cortex-M microcontroller, embedded microcontroller, and 32-bit microcontroller hierarchies. Its Cortex-M3 architecture provides deterministic control-oriented performance while the large package exposes substantially more I/O than smaller microcontrollers, making the device suitable for systems requiring numerous communications channels, analog inputs, and external memory interfaces. Key features include Ethernet, USB 2.0 Host, OTG, and Device support, an eight-channel DMA controller, five UARTs, two CAN channels, three SSP or SPI interfaces, three I2C interfaces, and I2S. The device also provides an eight-channel 12-bit ADC, a 10-bit DAC, a quadrature encoder interface, an LCD controller, and SD or MMC connectivity. These integrated resources reduce the need for external interface controllers in connected embedded equipment. The 512 kB flash provides on-chip firmware storage, while 96 kB of SRAM supports working memory, protocol stacks, display buffers, and acquisition data. The eight-channel DMA controller can transfer data independently of the processor, improving responsiveness for Ethernet, USB, audio, and display workloads. The 120 MHz Cortex-M3 core provides the processing headroom required for network protocol handling, control loops, and simultaneous peripheral activity. Typical applications include industrial gateways and factory automation controllers, USB-to-Ethernet communication equipment, medical monitoring systems, audio and communications equipment, data acquisition controllers, and HMI systems with LCD output. The Ethernet and USB interfaces are especially useful for connected products requiring firmware updates or network management, while the CAN, UART, I2C, and SPI interfaces support mixed industrial connectivity. When designing around the LPC1788FBD208K, verify every external signal against the complete 208-pin datasheet pinout and preserve adequate decoupling around the 3.3 V supply. The broad peripheral set increases pin and routing complexity, so a multilayer board with a controlled ground plane is generally preferable to a dense single-layer implementation. Firmware should also account for USB, Ethernet, and DMA activity when allocating SRAM and validating timing. This product record combines verified manufacturer specifications, distributor availability, package information, and application-oriented design guidance. It also distinguishes exact-device order variants from broader MCU families that are not automatically drop-in replacements, helping engineers avoid assuming that matching memory size or package alone guarantees peripheral, pin, and software compatibility.

見積もり お問い合わせ
LPC1812JET100E - 180MHz Cortex-M3 512KB MCU | NXP
LPC1812JET100E

LPC1812JET100E - 180MHz Cortex-M3 512KB MCU | NXP

The NXP Semiconductors LPC1812JET100E is a high-performance 32-bit ARM Cortex-M3 microcontroller with a 180 MHz maximum CPU frequency, 512 KB of flash memory, and 104 KB of SRAM, housed in a 100-ball TFBGA package measuring 9 mm by 9 mm. It is designed for embedded applications requiring substantial flash capacity, fast deterministic execution, and a compact surface-mount footprint. The LPC1812JET100E combines the Cortex-M3 processor with integrated microcontroller resources for connected, industrial, communications, and consumer equipment. An ARM Cortex-M3 microcontroller is a 32-bit embedded processor within the microcontroller and semiconductor hierarchy. The Cortex-M3 architecture uses a simplified instruction set and Thumb-2 technology to balance processing performance, deterministic interrupt handling, and low implementation complexity. Within the NXP LPC18xx family, the LPC1812JET100E is positioned as a high-performance MCU with 512 KB of program flash and 104 KB of SRAM, while retaining the peripheral and software ecosystem associated with the LPC18xx product line. Three principal characteristics define the part. Its 180 MHz operating frequency supports compute-intensive embedded workloads, while 512 KB of flash provides room for application code, firmware, and embedded data. The 104 KB of SRAM reduces dependence on external memory for working data and buffers. Its 100-ball TFBGA package, identified by the verified distributor data as a 9 mm by 9 mm package, supports compact designs but requires a fine-pitch PCB layout and careful manufacturing control. The Cortex-M3 architecture provides a 32-bit processing platform with efficient exception handling and low-power features intended for embedded use. The exact peripheral mix, clock configuration, I/O ratings, and electrical limits must be confirmed against the LPC1812JET100 manufacturer datasheet before final schematic or firmware sign-off. The supplied NXP product information identifies the MCU as a high-performance Cortex-M3 device and confirms the 512 KB flash, 104 KB SRAM, 180 MHz operating point, and TFBGA100 package used in this product record. Typical uses for the LPC1812JET100E include industrial data acquisition, communications equipment, USB-connected products, human-interface systems, and embedded control platforms with moderate code-storage requirements. Its 512 KB flash is useful for protocol stacks and application firmware, while 104 KB SRAM can support packet buffers, display interfaces, or multiple communication tasks. The 180 MHz Cortex-M3 core is particularly relevant when software timing, protocol handling, and control-loop calculations must coexist in one compact device. Designers should treat the fine-pitch TFBGA footprint as a manufacturing-sensitive implementation point. PCB layout must follow the NXP package drawing, including ball assignments, power routing, decoupling placement, and thermal-via requirements. Because the verified excerpts do not publish complete pin assignments, timing diagrams, or absolute maximum ratings, those values should be taken directly from the official datasheet rather than inferred from the distributor summaries. This product record combines verified manufacturer and distributor information with package-aware alternatives, practical PCB guidance, and direct answers to common sourcing and engineering questions. It is intended to accelerate component selection while clearly separating confirmed LPC1812JET100E facts from parameters that still require datasheet-level verification.

見積もり お問い合わせ
LPC1823JET100E - 180MHz Cortex-M3 MCU | NXP Semiconductors
LPC1823JET100E

LPC1823JET100E - 180MHz Cortex-M3 MCU | NXP Semiconductors

The NXP Semiconductors LPC1823JET100E is a high-performance 32-bit Arm Cortex-M3 microcontroller with 512 kB of flash memory, 104 kB of SRAM, and a maximum CPU frequency of 180 MHz, housed in a 100-ball TFBGA package measuring 9 x 9 mm. It is designed for embedded applications requiring high processing performance, substantial on-chip memory, and a broad set of serial and communications peripherals. An Arm Cortex-M3 microcontroller is a 32-bit reduced-instruction-set processor core used in embedded systems. Cortex-M3 devices belong to the broader microcontroller hierarchy, combining a processor core, flash memory, SRAM, peripheral controllers, and interrupt handling in one integrated circuit. This integration lets embedded products execute firmware while communicating with sensors, actuators, human interfaces, storage devices, and external networks through dedicated hardware peripherals. The LPC1823JET100E provides 512 kB flash for program storage, 104 kB SRAM for working memory, and an operating frequency up to 180 MHz. Its 100-ball TFBGA-100 package supports compact surface-mount PCB layouts. NXP describes the LPC18xx family as pin- and software-compatible with many related devices, allowing engineers to reuse software and consider family variants when product requirements change. Detailed electrical, peripheral, and environmental limits are available in the linked manufacturer documentation. The device uses the Arm Cortex-M3 architecture, whose efficient instruction set and hardware interrupt handling are suitable for real-time embedded control. Its combination of flash, SRAM, and processing speed allows more application code and data to remain on-chip than in smaller general-purpose microcontrollers. This can reduce external memory requirements in networking, industrial-control, communications, and embedded-processing equipment, subject to the complete peripheral configuration of the selected device. Typical uses include industrial automation equipment, USB-connected embedded systems, communications controllers, and compact control platforms. In each case, the MCU can execute control logic while its on-chip memory stores firmware and working data. Engineers should verify the required USB, Ethernet, CAN, LCD, storage, and other peripheral functions against the exact LPC1823 configuration before selecting it for a design. A critical design consideration is BGA assembly and inspection. The 100-ball TFBGA-100 footprint requires a compatible land pattern, controlled reflow, and appropriate solder-joint inspection because hidden joints are not visually accessible after assembly. Firmware should also be validated for the exact LPC1823 peripheral set because related LPC18xx devices can differ in memory and integrated interfaces. This product page consolidates verified manufacturer and distributor information, exact pricing references, same-package family alternatives, and practical design considerations. It also distinguishes confirmed LPC1823JET100E attributes from parameters that still require confirmation from the full NXP datasheet, helping engineers make evidence-based sourcing and design decisions.

見積もり お問い合わせ
LPC1830FBD144K - 180MHz Cortex-M3 MCU | NXP | Industrial
LPC1830FBD144K

LPC1830FBD144K - 180MHz Cortex-M3 MCU | NXP | Industrial

NXP Semiconductors LPC1830FBD144K is a 32-bit ARM Cortex-M3 microcontroller rated up to 180 MHz, with 200 kB of SRAM and ROMless program memory architecture, housed in a 144-pin LQFP package measuring 20 x 20 mm. It integrates Ethernet, two high-speed USB interfaces, CAN 2.0B, an SPI Flash Interface, and a State Configurable Timer. A microcontroller is a programmable control component that combines a processor core, memory interfaces, communication peripherals, timers, and general-purpose input/output functions on one integrated circuit. The LPC1830 belongs to the ARM Cortex-M microcontroller hierarchy, where the Cortex-M3 core provides a 32-bit instruction set optimized for embedded control. In the broader semiconductor taxonomy, it is a microcontroller IC and a member of the NXP LPC18xx family. The headline configuration combines a 180 MHz operating speed with 200 kB of SRAM, two high-speed USB interfaces, and Ethernet connectivity. Because the LPC1830 is ROMless, its application program must be stored in external nonvolatile memory and loaded into internal SRAM during startup. Additional peripherals include CAN 2.0B, an SPI Flash Interface, a State Configurable Timer, and a configurable LCD interface identified in the manufacturer materials. The Cortex-M3 architecture uses a 32-bit processing core with exception handling suited to real-time embedded products. Its integrated communication resources can reduce the number of supporting components when a design requires USB, Ethernet, CAN, and flash-memory access. The ROMless design provides flexibility in code storage, but it also requires careful boot-memory planning, initialization sequencing, and sufficient SRAM for the selected firmware and runtime data. Typical uses include industrial Ethernet controllers, USB-to-CAN gateways, external flash storage systems, network-connected test equipment, and embedded data-acquisition platforms. In each case, the combination of high-speed USB, Ethernet, CAN, and substantial SRAM allows multiple communication paths to coexist without requiring separate interface devices. Designers should confirm the external memory interface, startup configuration, pin multiplexing, USB transceiver requirements, and Ethernet magnetics requirements against the complete manufacturer datasheet before layout. The 144-pin LQFP also requires a dense, multilayer PCB with careful routing of high-speed USB and Ethernet signals, controlled impedance, short return paths, and adequate decoupling close to the device. This product record combines verified manufacturer and distributor facts with an honest identification of unavailable electrical and pin-level data. It also documents package characteristics, practical design constraints, and the absence of verified drop-in replacements instead of presenting unsupported cross-references as drop-in options.

見積もり お問い合わせ
LPC1830FET100Y - 180MHz Cortex-M3 MCU | NXP | Industrial
LPC1830FET100Y

LPC1830FET100Y - 180MHz Cortex-M3 MCU | NXP | Industrial

The NXP LPC1830FET100Y is a 32-bit ARM Cortex-M3 microcontroller operating up to 180 MHz, with 200 kB of SRAM, external memory interfaces, Ethernet, USB 2.0, CAN 2.0B, SPI Flash Interface, and a State Configurable Timer in a 100-ball TFBGA package measuring 9 x 9 mm. The ROMless architecture requires an external boot memory source, making the device suitable for applications that need flexible firmware storage or field-programmable memory. A microcontroller is a programmable semiconductor that integrates a processor core, memory interfaces, communication peripherals, timers, and general-purpose I/O into one compact device. The LPC1830 belongs to the Cortex-M3 embedded-processing hierarchy, where a microcontroller sits below the broader category of microprocessors and above application-specific embedded control systems. It combines deterministic real-time control with network and high-speed connectivity. The LPC1830FET100Y provides 200 kB of SRAM and operates from 2.5 V or 3.3 V, according to the verified NXP and distributor product information. Its Ethernet controller, two high-speed USB interfaces, and CAN 2.0B controller support connected industrial, communications, and data-acquisition equipment. The dedicated SPI Flash Interface allows the MCU to access external serial flash, while the State Configurable Timer supports timing functions that can be adapted to different control tasks. Operation up to 180 MHz provides sufficient processing performance for protocol handling, control logic, and concurrent peripheral activity. Because the device is ROMless, designers must provide suitable external boot memory and include a valid startup image in the system architecture. The 100-TFBGA package also requires careful PCB layout, with short escape routing and a ball grid that is not directly compatible with a conventional fine-pitch TQFP footprint. Typical applications include industrial Ethernet controllers, USB-to-serial and USB-to-CAN gateways, network-connected instrumentation, embedded data loggers, and industrial automation modules. The Ethernet and USB peripherals are especially useful where a single controller must bridge embedded processing with external hosts or network equipment. CAN support also permits connection to industrial bus nodes, sensors, and actuator networks. A primary design consideration is the 100-ball BGA assembly process. The PCB should be designed for the manufacturer-recommended land pattern, with controlled impedance routing for Ethernet and USB, local decoupling near each supply ball, and thermal-via placement beneath the device where required. Component availability, flash configuration, boot behavior, and interface timing must be validated before production release. This product page consolidates verified manufacturer and distributor information, identifies the MCU's principal connectivity and memory features, and documents the engineering trade-offs associated with its ROMless architecture, 100-TFBGA package, and external peripheral ecosystem.

見積もり お問い合わせ
LPC1833JBD144 - 180MHz Cortex-M3 MCU, 512KB Flash, LQFP-144 | NXP
LPC1833JBD144

LPC1833JBD144 - 180MHz Cortex-M3 MCU, 512KB Flash, LQFP-144 | NXP

The NXP LPC1833JBD144 is a high-performance 32-bit ARM Cortex-M3 MCU operating at up to 180 MHz, equipped with 512 kB flash, 136 kB SRAM, dual High-Speed USB, Ethernet MAC, and an integrated LCD controller, housed in a 144-pin LQFP package. It belongs to the LPC18xx family of microcontrollers designed for embedded applications requiring substantial connectivity and processing headroom. A 32-bit microcontroller (MCU) is a single-chip computer integrating a CPU core, program memory, data memory, and programmable peripherals. The LPC18xx family occupies the high-performance tier of NXP's Cortex-M3 lineup, sitting between the mainstream LPC15xx/LPC17xx and the dual-core LPC40xx, typically used in industrial HMI, USB peripherals, and connectivity gateways. Key features of the LPC1833JBD144 include Cortex-M3 core at 180 MHz, two High-Speed USB 2.0 OTG controllers (one with on-chip HS PHY), 10/100 Ethernet MAC, an LCD controller supporting STN/TFT panels, dual SPI/I2C, UART, CAN, 4 kB EEPROM emulation in flash, and a 4 MB address space via the external memory controller. Power is supplied from a 2.4V to 3.6V rail, with deep-sleep and power-down modes for battery-sensitive designs. Architecturally, the LPC1833 uses a 3-stage pipeline Cortex-M3 core with NVIC supporting up to 32 priority levels, a dedicated DMA controller, and a multilayer AHB bus matrix that allows simultaneous CPU and peripheral transfers. The on-chip HS USB PHY eliminates external transceiver parts, reducing both BOM and PCB area, while the EMC (External Memory Controller) allows expansion to SDRAM or SRAM up to 4 MB. Typical applications include industrial HMI panels using the integrated LCD controller, USB device/host peripherals such as card readers or instrumentation, Ethernet-connected sensor hubs, and motor-control reference designs. The wide peripheral mix is well-suited to multi-protocol gateways and point-of-sale terminals. When designing with the LPC1833JBD144, ensure the PCB exposes the JTAG/SWD pins for debug access and provide adequate decoupling (100 nF + 4.7 µF) near each VDD/VSS pair. The LQFP-144 footprint has lower thermal performance than QFN/BGA; for sustained high-current peripherals, route multiple internal power/ground planes. This page synthesizes distributor pricing, drop-in alternatives within the LPC18xx family, and practical design notes that complement the manufacturer's datasheet and shorten time-to-prototype for LPC18xx-based designs.

見積もり お問い合わせ
LPC1833JBD144E - 180MHz Cortex-M3 MCU, 512KB Flash | NXP
LPC1833JBD144E

LPC1833JBD144E - 180MHz Cortex-M3 MCU, 512KB Flash | NXP

The NXP LPC1833JBD144E is a high-performance 32-bit Arm Cortex-M3 microcontroller with 512 KB of on-chip flash and 136 KB of SRAM, housed in a 144-pin LQFP (20x20 mm) package. It operates at CPU frequencies up to 180 MHz and integrates two high-speed USB 2.0 controllers (one Host, one Host/Device), a 10/100 Ethernet MAC, an external memory controller, and a rich set of serial peripherals including UART, SPI, I2C, and CAN. The 'E' suffix denotes an extended-temperature grade suitable for industrial environments. An Arm Cortex-M3 microcontroller is a 32-bit MCU core designed by Arm for deterministic embedded applications. Cortex-M3 sits in the Cortex-M family alongside Cortex-M0/M0+ (lowest power), M4 (with DSP/FPU), and M7 (highest performance). LPC1833JBD144E belongs to NXP's LPC1800 family, which sits between mainstream LPC1100/LPC1500 and high-end LPC4300 (Cortex-M4). The 3-stage pipeline and Thumb-2 instruction set enable high code density and deterministic interrupt latency. Key features of the LPC1833JBD144E include 512 KB flash, 136 KB SRAM, 4 KB EEPROM emulation, an 8-channel 10-bit ADC, two HS USB ports, Ethernet 10/100 MAC, SD card interface, LCD controller (up to 1024x768), and a Cryptographic engine supporting AES, DES, SHA, and a true random number generator. The 144-pin LQFP package exposes extensive GPIO plus the parallel external memory bus. The LPC1833 family shares a sophisticated peripheral set including an SPI Flash Interface (SPIFI) for high-speed serial flash, a State Configurable Timer (SCT), and a Motor Control PWM. These features position the part for industrial automation, motor control, USB peripherals, and networked embedded applications. Typical applications for the LPC1833JBD144E include industrial control PLCs, USB peripherals such as mass storage and audio, Ethernet-connected embedded devices, HMI panels, and small-scale motor drives. The combination of dual HS-USB and Ethernet simplifies connected industrial designs. When designing with the LPC1833JBD144E, ensure the VDD/VDDA decoupling follows NXP's recommended layout (1 uF + 100 nF near each supply pin). The wide operating range (2.2V to 3.6V) simplifies power design. The 'E' temperature grade supports -40C to +105C ambient. Verify boot source strapping for ISP/UART/SPIFI on reset release. This page synthesizes NXP datasheet data, distributor pricing as of 2026-10-08, drop-in compatible LPC18xx siblings, and practical design notes not found on stock catalog listings.

見積もり お問い合わせ
LPC1833JET100E - 180MHz Cortex-M3 MCU with USB | NXP
LPC1833JET100E

LPC1833JET100E - 180MHz Cortex-M3 MCU with USB | NXP

The NXP Semiconductors LPC1833JET100E is a high-performance 32-bit Arm Cortex-M3 microcontroller operating up to 180 MHz, with 512 kB of flash memory, 136 kB of SRAM, Ethernet, and two high-speed USB interfaces in a 100-ball TFBGA package measuring 9 mm by 9 mm. A microcontroller is a programmable semiconductor that integrates a processor core, nonvolatile program memory, volatile data memory, and peripherals into one compact device. The LPC1833JET100E belongs to the MCU, embedded processor, and semiconductor hierarchy. Its Cortex-M3 core combines a 32-bit architecture with an efficient instruction set suited to embedded control, while its Ethernet and high-speed USB connectivity allows the same device to manage communications as well as real-time control functions. The device provides 512 kB of flash for firmware and 136 kB of SRAM for working data. Two high-speed USB interfaces reduce the need for additional USB controllers in designs requiring multiple USB connections. Integrated Ethernet similarly supports network-connected equipment without requiring a separate Ethernet interface IC. These capabilities make the LPC1833JET100E suitable for industrial gateways, USB-to-Ethernet equipment, data acquisition systems, and connected embedded controllers. The LPC18xx family is based on the Arm Cortex-M3 architecture and is positioned for embedded applications requiring high performance, substantial memory, Ethernet, USB, and LCD-related connectivity. Two high-speed USB interfaces and Ethernet provide the most distinctive connectivity combination in the verified product information, while the 180 MHz operating speed gives the processor more compute headroom than many lower-frequency embedded controllers. Typical implementations include industrial Ethernet bridges, USB hubs and peripheral controllers, connected test equipment, network interface modules, and multifunction embedded platforms. A design can place the MCU directly at the center of an Ethernet-enabled control system and use its two USB interfaces for either two peripheral roles or a host/device combination, depending on the required system topology. PCB implementation requires careful BGA layout, power and ground distribution, and signal-integrity management. Although the 9 mm by 9 mm TFBGA-100 package supports compact designs, its 100 terminals require adequate escape routing and via density. Firmware and peripheral assignments must also be reviewed against the manufacturer datasheet before production release. This page consolidates verified manufacturer and distributor information, package details, pricing references, same-family replacement considerations, and practical design guidance. It also distinguishes confirmed drop-in candidates from devices that may share a package without providing a complete functional replacement.

見積もり お問い合わせ
LPC1833JET256 - 32-bit ARM Cortex-M3 MCU, 512KB Flash, 180MHz | NXP
LPC1833JET256

LPC1833JET256 - 32-bit ARM Cortex-M3 MCU, 512KB Flash, 180MHz | NXP

The NXP Semiconductors LPC1833JET256 is a high-performance 32-bit ARM Cortex-M3 microcontroller operating at up to 180 MHz, housed in a 256-ball LBGA (JET) package measuring 17x17 mm. It integrates 512 KB of on-chip flash memory and 136 KB of total SRAM, with peripheral features including Ethernet MAC, two High-speed USB controllers, an LCD controller, and multiple serial interfaces for embedded connectivity applications. A microcontroller (MCU) is a single-chip computer containing a CPU core, program memory (flash), data memory (SRAM), and integrated peripherals such as timers, ADCs, and communication interfaces. The ARM Cortex-M3 core is a 32-bit RISC processor featuring a 3-stage pipeline, hardware divide, single-cycle multiply, and a Nested Vectored Interrupt Controller (NVIC). The LPC18xx family sits within NXP's hierarchy of ARM-based embedded processors, ranging from low-power Cortex-M0+ parts up to Cortex-M4 parts with DSP and floating-point extensions. Key features of the LPC1833JET256 include: 512 KB flash, 136 KB SRAM, Ethernet MAC with IEEE 1588 support, two High-speed USB 2.0 controllers (one Host, one OTG), an LCD controller supporting STN and TFT panels, four UARTs, three SSP/SPI controllers, two I2C buses, a 10-bit ADC, and an external memory controller (EMC) for SDRAM and SRAM expansion. The device operates from a 2.4V to 3.6V supply and supports industrial temperature range of -40C to +105C. The LPC1833 is fabricated in a low-power CMOS process and integrates a high-bandwidth AHB multilayer matrix that allows concurrent access to flash, SRAM, and peripherals without CPU stalls. Its security features include a unique device serial number, a memory protection unit (MPU), and optional AES encryption via a dedicated hardware block on some family members. The 180 MHz Cortex-M3 delivers approximately 1.25 DMIPS/MHz, providing 225 DMIPS of computational headroom for protocol stacks, real-time control, and signal processing tasks. Typical applications include industrial automation controllers, Ethernet-enabled gateways and IoT edge nodes, HMI panels with TFT displays, USB peripherals and host devices, point-of-sale terminals, and motor control boards. The wide peripheral set makes the LPC1833 a versatile platform for connected embedded products requiring both rich connectivity and deterministic real-time performance. When designing with the LPC1833JET256, allocate sufficient PCB area for the 256-ball LBGA - a 0.8 mm pitch requires 4-layer or 6-layer PCB stack-up with laser-drilled or small-diameter vias for fanout. Decouple each VDD/VSS pair with a 100 nF X7R ceramic capacitor placed within 2 mm of the ball. Use the EMC interface carefully; place series resistors on the SDRAM clock and traces to minimize ringing. This page consolidates distributor pricing, verified drop-in alternatives, and practical design notes that complement the manufacturer datasheet - giving procurement and engineering teams a single reference for evaluating the LPC1833JET256 against competing Cortex-M3 microcontrollers in the same 256-ball LBGA footprint.

見積もり お問い合わせ
LPC1837JBD144E - 180MHz Cortex-M3 MCU with 1MB Flash | NXP
LPC1837JBD144E

LPC1837JBD144E - 180MHz Cortex-M3 MCU with 1MB Flash | NXP

The NXP Semiconductors LPC1837JBD144E is a high-performance 32-bit ARM Cortex-M3 microcontroller with a maximum CPU frequency of 180 MHz, 1 MB of flash memory, 136 kB of SRAM, and a 144-pin LQFP package. It is designed for embedded applications that require substantial local memory and a broad set of connectivity peripherals. An ARM Cortex-M3 microcontroller is a 32-bit reduced-instruction-set-computing core designed for embedded control. In the product hierarchy, this MCU belongs to the LPC1800 family and combines a real-time processor, nonvolatile program memory, volatile data memory, and integrated communication peripherals in one integrated circuit. The LPC1837 is positioned for connected industrial equipment, communications equipment, and control systems requiring high processing performance and extensive I/O. The verified device information identifies 1 MB of flash, 136 kB of SRAM, and a 144-LQFP package. The LPC18xx family also includes Ethernet, two high-speed USB interfaces, LCD support, and other connectivity features according to the available manufacturer-family description. These characteristics make the device suitable for human-machine interfaces, protocol gateways, data acquisition systems, and embedded networking platforms. The ARM Cortex-M3 core supports efficient 32-bit processing while retaining a compact embedded architecture. Flash provides nonvolatile firmware storage, while the relatively large SRAM supports buffering, protocol stacks, display interfaces, and real-time workloads. The 144-pin package offers extensive peripheral access compared with smaller MCUs, making board-level pin planning important. Typical applications include industrial Ethernet controllers, USB-connected embedded systems, LCD human-machine interfaces, communications gateways, and multichannel control platforms. The E suffix in LPC1837JBD144E indicates a specified ordering variant; verify temperature grade, packaging, and production status against the current NXP documentation before release to manufacturing. For PCB implementation, use the NXP data sheet for the exact LQFP144 land pattern, power pins, decoupling requirements, and exposed thermal considerations. Do not infer pin compatibility from the package alone: Ethernet, USB, LCD, memory, and peripheral assignments must match the intended board revision and firmware configuration. This product page consolidates verified NXP and distributor information, same-family alternatives, application guidance, and design cautions that are not contained on a basic distributor listing. It is intended to support initial component selection while directing engineers to the authoritative NXP datasheet for final electrical and pin-level verification.

見積もり お問い合わせ
LPC1853FET256 - 180MHz Cortex-M3 MCU, 512KB | NXP
LPC1853FET256

LPC1853FET256 - 180MHz Cortex-M3 MCU, 512KB | NXP

The NXP Semiconductors LPC1853FET256 is an ARM Cortex-M3 32-bit microcontroller running up to 180 MHz with 512 kB on-chip flash and 136 kB SRAM, housed in a 256-ball LBGA (17x17 mm, SOT570-3 / TFBGA-256) package. It integrates two High-Speed USB controllers, an Ethernet MAC, an LCD controller, an External Memory Controller (EMC), and 118 general-purpose I/O lines, making it a dense single-chip solution for graphics-rich and connectivity-rich embedded applications. An ARM Cortex-M3 microcontroller is a 32-bit RISC core designed by Arm for low-cost, low-power embedded applications. The Cortex-M3 family belongs to the broader category of microcontrollers (MCUs) within the integrated-circuits hierarchy, and it sits between 8/16-bit legacy MCUs and higher-end Cortex-M4/M7 cores. The Cortex-M3 implements the Thumb-2 instruction set, includes a 3-stage pipeline, and offers tightly integrated NVIC interrupt control, positioning the LPC1853FET256 as a step above entry-level Cortex-M0/M0+ parts in computational throughput while remaining more deterministic than Cortex-A application processors. Key features of the LPC1853FET256 include a 180 MHz maximum CPU frequency, 512 kB flash, 136 kB SRAM, two HS-USB (Host/Device/OTG), 10/100 Ethernet MAC, LCD controller supporting STN/TFT panels, an 8-channel 10-bit ADC, four timers, a quadrature encoder interface, and multiple serial interfaces including UART, SPI, I2C, and I2S. The 256-ball LBGA package provides 118 GPIO pins for maximum peripheral parallelism and is supplied from a 2.2 V to 3.6 V rail, simplifying designs that need to mate with 3.3 V logic. The architecture combines the deterministic Cortex-M3 core with on-chip peripherals accessed through an AMBA AHB multilayer matrix. This matrix allows simultaneous DMA and CPU traffic to SRAM, Ethernet, USB, and the LCD controller without bus contention, which is critical for HMI applications where display refresh must coexist with network stack processing. The part supports low-power modes including Sleep, Deep-sleep, Power-down, and Deep Power-down for battery-friendly operation. Typical applications span industrial control panels with TFT LCD + Ethernet connectivity, USB host/device embedded products such as printers and POS terminals, building automation gateways, motor control HMIs, and medical device interfaces. The Ethernet + dual HS-USB combination specifically suits gateway and bridging products where the MCU acts as a protocol translator between field buses and host PCs. A key design consideration is the 256-ball LBGA package, which requires 4-layer or better PCB stack-up with laser-drilled or plugged micro-vias. Ground-bonded thermal vias under the central die-attach pad are recommended for reliable thermal performance at 180 MHz across 4 V operation. Designers should budget for SDRAM (when EMC is enabled) and reserve a QSPI footprint for optional external boot flash.

見積もり お問い合わせ
LPC1857FET256 - 180MHz Cortex-M3 MCU, 1MB Flash | NXP | LBGA-256
LPC1857FET256

LPC1857FET256 - 180MHz Cortex-M3 MCU, 1MB Flash | NXP | LBGA-256

The NXP Semiconductors LPC1857FET256 is a high-performance 32-bit ARM Cortex-M3 microcontroller operating at up to 180 MHz, integrating 1 MB of on-chip flash and 136 kB SRAM, and offered in a 256-pin LBGA (17x17 mm) package. An ARM Cortex-M3 microcontroller is a 32-bit RISC processor core designed for deterministic real-time embedded applications; the Cortex-M3 sits within the ARM Cortex-M family (Cortex-M0/M0+/M3/M4/M7/M33) and is widely used where deterministic interrupt latency, hardware division, and Thumb-2 instruction efficiency are required. The LPC18xx family specifically targets high-throughput connected applications by pairing the Cortex-M3 core with high-speed peripherals including two HS USB ports, an on-chip LCD controller, an Ethernet MAC, and external memory controllers. Positioned within the broader taxonomy: microcontroller -> MCU -> 32-bit MCU -> ARM Cortex-M MCU -> LPC18xx -> LPC1857. Key features of the LPC1857FET256 include 1 MB flash with a flash accelerator, 136 kB total SRAM, two High-Speed USB 2.0 controllers (one with on-chip HS PHY), 10/100 Ethernet MAC, an LCD controller supporting STN and TFT panels up to WXGA, a Quad-SPI Flash Interface (SPIFI), two CAN 2.0B interfaces, three SSP/SPI controllers, one Fast-mode Plus I2C, a 10-bit ADC, a 10-bit DAC, four general-purpose timers, two SCTimer/PWM subsystems, an RTC, and a windowed watchdog timer. The device supports up to 142 GPIO pins with 5 V-tolerant I/O on most pins, an external memory controller (EMC) for SRAM/PSRAM/NOR/NAND, and an SD/MMC interface. The LPC1857FET256 uses a 3.3 V single-supply core with internal LDO regulation, a configurable clock generation unit (PLL) sourced from an external crystal or internal RC, and a power management block that supports Sleep, Deep-Sleep, Power-down, and Deep Power-down modes with multiple wake-up sources including RTC alarm, USB activity, Ethernet Wake-on-LAN, and external interrupts. The dual-bank flash with flash accelerator delivers zero-wait-state execution from flash at full 180 MHz, enabling deterministic code execution for industrial control loops. Typical applications include industrial HMI panels with TFT LCD, factory automation controllers, point-of-sale terminals, USB-enabled embedded peripherals, gateway nodes for industrial Ethernet, motor-control front-ends, secure connected sensors, and rugged portable medical devices where the Cortex-M3 deterministic interrupt latency simplifies safety-critical code paths. When designing with the LPC1857FET256, pay attention to decoupling the LBGA256 power rails: a four-layer PCB with continuous power planes under the BGA is required to achieve the thermal performance and signal integrity the part expects; the SPIFI interface allows low-cost quad-SPI NOR flash expansion without increasing pin count.

見積もり お問い合わせ
LPC1857JBD208 - 180MHz Cortex-M3 1MB MCU | NXP
LPC1857JBD208

LPC1857JBD208 - 180MHz Cortex-M3 1MB MCU | NXP

The NXP Semiconductors LPC1857JBD208 is a high-performance 32-bit Arm Cortex-M3 microcontroller with a maximum CPU frequency of 180 MHz, 1 MB of flash memory, and 136 kB of SRAM. It is offered in a 208-pin LQFP package measuring 28 x 28 mm and integrates Ethernet, two high-speed USB interfaces, LCD support, and extensive connectivity for embedded applications. A microcontroller is a programmable integrated circuit that combines a processor core, memory, and peripherals in one device. The LPC1857 belongs to the microcontroller hierarchy: Cortex-M3 processor, embedded MCU, embedded semiconductor, and system-on-chip component. Its integrated peripherals reduce external component count while supporting communications, display, storage, timing, and industrial-control designs. Key features include the Arm Cortex-M3 core, up to 180 MHz operation, 1 MB flash, 136 kB SRAM, two HS USB ports, Ethernet connectivity, and LCD support. The large 208-pin LQFP package provides extensive I/O access and is appropriate for designs requiring many external peripherals, parallel interfaces, or mixed-signal connections. The LPC1857 family also provides low-power operation and enhanced debug support according to the manufacturer product description. The LPC1857JBD208 is targeted at industrial equipment, networking appliances, human-machine interfaces, data acquisition, communications infrastructure, and embedded control platforms. Its combination of high CPU frequency, substantial memory, and multiple communication interfaces supports protocol processing, user-interface control, data logging, and supervisory control tasks. The LCD controller is useful for local graphical or character-based operator displays. A key design consideration is package and firmware planning. The LQFP-208 footprint requires careful high-density PCB layout, exposed thermal behavior must be evaluated against the operating temperature and CPU workload, and firmware must be validated against the exact LPC1857 peripheral set and errata documentation. USB, Ethernet, LCD, and memory interfaces should be checked against the system signal-integrity requirements before release to production. This page combines the verified NXP product characteristics with distributor pricing references, practical application guidance, and honest replacement limitations. Cross-reference search results identify NXP family options, but they do not establish verified pin-compatible substitutes for this exact 208-pin device; engineers should therefore validate footprint, pinout, memory, peripheral, and firmware compatibility before substitution.

見積もり お問い合わせ
LPC1857JBD208E - 180MHz Cortex-M3 1MB MCU | NXP
LPC1857JBD208E

LPC1857JBD208E - 180MHz Cortex-M3 1MB MCU | NXP

The NXP Semiconductors LPC1857JBD208E is a high-performance 32-bit ARM Cortex-M3 microcontroller with a maximum operating frequency of 180 MHz, 1 MB of flash memory, 136 kB of SRAM, and a 208-pin LQFP package measuring 28 mm by 28 mm. The device integrates two high-speed USB interfaces, Ethernet, LCD support, and a broad collection of embedded peripherals for connected industrial, communications, medical, and control systems. An ARM Cortex-M3 microcontroller is a 32-bit embedded processor within the ARM Cortex-M family of real-time microcontroller products. Its three-stage pipeline and integrated system features support deterministic embedded control, while dedicated communication peripherals reduce the need for external controllers. The LPC1857 therefore belongs to the hierarchy microcontroller, embedded processor, semiconductor, and electronic component. Principal features include a 1 MB flash code-storage capacity, 136 kB of SRAM, operation up to 180 MHz, two HS USB interfaces, Ethernet connectivity, and LCD support. The combination of substantial on-chip memory and integrated connectivity allows firmware, graphical interfaces, protocol stacks, and data-processing functions to be consolidated into one device. The 208-pin LQFP package also provides a large pin count for systems requiring numerous I/O, communications, analog, and debug connections. The LPC1857 family uses the ARM Cortex-M3 architecture, which provides a 32-bit processing environment with deterministic interrupt-oriented execution and enhanced debugging support. Its integration of USB, Ethernet, LCD, and extensive GPIO resources makes it more suitable for complex embedded platforms than a basic general-purpose microcontroller. Detailed flash organization, SRAM banking, peripheral pin assignments, electrical limits, and clock-tree values should be confirmed in the manufacturer datasheet for the exact ordering code. Typical applications include industrial Ethernet controllers, USB-connected data acquisition equipment, medical monitoring systems, HMI display controllers, building automation equipment, and network-connected embedded control products. Two USB interfaces permit simultaneous device-role and host/device connectivity, while Ethernet supports networked monitoring and control. The LCD interface is useful in operator panels and local graphical displays. Designers should preserve the exact 208-pin LQFP land pattern, provide the required decoupling and clock circuitry, and validate every signal connected to the numerous peripheral pins. Firmware, peripheral configuration, and board-level timing should be checked against the NXP documentation, especially when using the Ethernet, USB, LCD, or high-speed memory interfaces. This page combines verified source facts with package-aware alternatives and practical engineering guidance.

見積もり お問い合わせ
LPC18S30FET256 - 180MHz Cortex-M3 Flashless MCU, 256-LBGA | NXP
LPC18S30FET256

LPC18S30FET256 - 180MHz Cortex-M3 Flashless MCU, 256-LBGA | NXP

The NXP Semiconductors LPC18S30FET256 is a high-performance ARM Cortex-M3 microcontroller running at up to 180 MHz, featuring 200 kB of on-chip SRAM, ROMless boot architecture, hardware security features, Ethernet MAC, two High-Speed USB 2.0 controllers (one Host/Peripheral, one Host-only), an External Memory Controller (EMC), and a 256-pin LBGA package (17x17 mm). It is part of the LPC1800 series, optimized for industrial control, HMI, motor drive, and secure embedded applications where external flash memory is acceptable. A microcontroller (MCU) is an integrated circuit that combines a CPU core, volatile memory (SRAM), non-volatile memory (Flash/ROM or external), and programmable peripherals on a single chip. The Cortex-M3 is an ARM-designed 32-bit RISC core featuring Thumb-2 instruction set, deterministic interrupts, and a Nested Vectored Interrupt Controller (NVIC). LPC1800 MCUs sit in NXP's high-performance general-purpose MCU hierarchy (MCU -> Cortex-M3 -> LPC1800 series -> LPC18Sxx sub-family), providing more compute and peripherals than Cortex-M0/M0+ parts while remaining lower-cost than Cortex-M4 parts. Key features include 200 kB SRAM, 4 kB EEPROM, AES hardware decryption accelerator, two HS-USB ports with on-chip PHY, 10/100 Ethernet MAC with MII/RMII interface, Quad-SPI Flash Interface (SPIFI), EMC supporting SRAM/SDRAM/NOR/NAND, up to 165 GPIO pins, four UARTs, three I2C, two CAN, two SSP/SPI controllers, and a 10-bit ADC with 8 channels. The LBGA256 (17x17 mm) package supports high-density I/O for graphics and external memory expansion. The LPC18S30FET256 uses NXP's standard peripherals library and CMSIS support, enabling rapid firmware development. Its security subsystem (hardware AES + unique device ID + secure boot) makes it suitable for anti-counterfeiting and tamper-resistant designs. The ROMless architecture requires external SPIFI or EMC flash for code storage, giving designers flexibility in memory density and updateability. Typical applications include industrial Human-Machine Interfaces (HMI), motor control and drives, factory automation controllers, secure POS terminals, and embedded networking gateways. When designing with the LPC18S30FET256, ensure proper decoupling (100 nF per VDD pin, 4.7 uF bulk), matched-impedance routing for HS-USB and Ethernet differential pairs, and a 12 MHz external crystal with correct load capacitance. The ROMless boot sequence must be validated using the boot ROM via the ISP/UART or SPIFI interface. Choose LPC18S30FET256E for the industrial-grade variant with extended temperature range. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found on a single manufacturer page.

見積もり お問い合わせ
LPC2104BBD48 - 32-bit ARM7 MCU 128kB Flash LQFP-48 | NXP
LPC2104BBD48

LPC2104BBD48 - 32-bit ARM7 MCU 128kB Flash LQFP-48 | NXP

The NXP Semiconductors LPC2104BBD48 is a single-chip 32-bit ARM7TDMI-S microcontroller with 128 kB of embedded high-speed flash memory, 16 kB of SRAM, real-time emulation, and embedded Trace support, supplied in a 48-lead LQFP package (SOT313-2, 7 mm x 7 mm x 1.4 mm body, 0.5 mm pitch). It operates at up to 60 MHz from a 1.65 V to 1.95 V core supply and provides 32 GPIO pins for general-purpose use. A microcontroller (MCU) is an integrated circuit that combines a CPU core, program memory (typically flash), data memory (RAM), and a rich set of peripherals on a single die. The LPC2104 sits inside the broader hierarchy of: microcontroller -> embedded microprocessor -> integrated circuit -> semiconductor. Its ARM7TDMI-S core is a 16/32-bit RISC processor from the ARM7 family, historically one of the most widely deployed 32-bit MCU cores in industrial, automotive, and consumer embedded designs. Key features of the LPC2104BBD48 include 128 kB of on-chip ISP/IAP flash, 16 kB of SRAM, two 32-bit timers, a 10-bit ADC, I2C, SPI, and UART serial interfaces, plus a Real-Time Clock (RTC) with battery backup support. The device also integrates a Vectored Interrupt Controller (VIC) for fast deterministic interrupt response, and offers JTAG and EmbeddedICE for in-system debug. The LPC2104 uses a 128-bit wide internal flash bus to deliver sustained instruction throughput from flash despite the 0-wait-state architecture, and supports a 16-bit Thumb instruction set to improve code density. Power management includes two low-power modes (idle and power-down), an external interrupt wake-up path, and a brown-out detector to protect flash integrity. Typical applications include industrial control nodes, embedded sensor hubs, low-power handheld terminals, RS-485/Modbus gateway controllers, and legacy ARM7 retrofits. The combination of small LQFP-48 footprint, ample flash, and proven ARM7 toolchain makes it well-suited to brownfield designs where ARM Cortex migration is not yet required. When designing with the LPC2104, plan the crystal/oscillator layout per the datasheet because the internal PLL is sensitive to noise on VREF/VSSA; place 100 nF and 10 uF decoupling capacitors close to each supply pin. Note that this part is reported as obsolete/EOL on at least one distributor source, so plan second-source or migration path early. This page synthesises drop-in alternatives (same-brand first), 60 MHz ARM7 design considerations, and a comparison matrix that includes package/flash/RAM dimensions not aggregated on typical distributor listings.

見積もり お問い合わせ
LPC2132FBD64/01151 - ARM7 64KB Flash MCU | NXP 64-LQFP
LPC2132FBD64/01151

LPC2132FBD64/01151 - ARM7 64KB Flash MCU | NXP 64-LQFP

The NXP LPC2132FBD64/01151 is a 16/32-bit ARM7TDMI-S microcontroller with 64 KB of embedded high-speed flash memory, 16 KB SRAM, and a rich set of peripherals, housed in a 64-pin LQFP (10x10 mm) package. It integrates a 10-bit ADC, 10-bit DAC, two 32-bit timers, a watchdog timer, real-time clock, USB 2.0 full-speed device controller, and multiple serial interfaces (UART, SPI, I2C). Key specifications include a 60 MHz maximum CPU clock from the on-chip PLL, 128-bit wide memory interface with a unique accelerator enabling 32-bit code execution at maximum clock rate, single 3.3 V power supply operation, and on-chip integrated oscillator. The MCU targets embedded control, industrial networking, and USB device applications where deterministic real-time behavior is required. The LPC2132 belongs to the LPC2131/32/34/36/38 family which scales flash memory from 32 KB to 512 KB. Its 64 KB flash and 16 KB SRAM position it as a mid-density member of the family, suitable for applications requiring modest program and data memory plus USB connectivity. The peripheral mix (USB, ADC, DAC, RTC, multiple timers) provides a complete system-on-chip solution for industrial, medical, and consumer products. Typical applications include industrial control and automation, USB peripherals and bridges, point-of-sale terminals, medical instrumentation, smart card readers, and general embedded control. The on-chip USB 2.0 full-speed device controller simplifies USB device designs by eliminating external PHY and reducing BOM cost. When designing with this device, ensure the JTAG and Embedded Trace Macrocell (ETM) debug access is preserved for development and field updates; the ARM7TDMI-S supports both real-time emulation and embedded trace. ISP/IAP flash programming via UART enables in-system firmware updates without removing the part from board-level access. This page synthesizes distributor pricing, drop-in alternative MPNs, and practical design notes for the LPC2132FBD64/01151 that are not found in the manufacturer datasheet, enabling engineers to make faster component selection decisions.

見積もり お問い合わせ