AD623ANZ vs AD623BNZ 比較
詳細な並列比較: AD623ANZ メーカー: Analog Devices および AD623BNZ メーカー: Analog Devices。主要仕様、電気的特性、パッケージ、ライフサイクルステータス、価格、在庫状況を比較して、設計要件に最適な部品を判断してください。
仕様比較
| パラメータ | AD623ANZ | AD623BNZ |
|---|---|---|
| ブランド | Analog Devices | Analog Devices |
| カテゴリ | Amplifier ICs | Amplifier ICs |
| ライフサイクル状態 | 有効 | 有効 |
| Product Type | Instrumentation amplifier | Single-circuit instrumentation amplifier |
| Number of Circuits | 1 circuit | — |
| Supply Voltage Range | 2.7 V to 12 V | 2.7 V to 12 V |
| Single-Supply Configuration | 3 V to 12 V | — |
| Dual-Supply Operation | Supported | Supported |
| Output Swing | Rail-to-rail | Rail-to-rail |
| Gain Programming | Single external gain-set resistor | User-programmable resistor |
| パッケージ | 8-PDIP | 8-pin PDIP |
| Lead Count | 8 leads | — |
| Input Signal | Differential | — |
| Common-Mode Handling | Instrumentation-amplifier input | — |
| Power Class | Low-cost, low-power instrumentation amplifier | — |
| Product Class | Rail-to-rail instrumentation amplifier | — |
| Pin Configuration | Industry-standard 8-lead instrumentation-amplifier configuration | — |
| RoHS ステータス | Unknown | [DATA_NEEDED: RoHS status] |
| REACH Status | Unknown | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | Not applicable | [DATA_NEEDED: AEC-Q100 qualification] |
| 動作温度範囲 | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| Gain Bandwidth | [DATA_NEEDED: gain bandwidth] | — |
| Input Noise Density | [DATA_NEEDED: input noise density] | — |
| Common-Mode Rejection Ratio | [DATA_NEEDED: common-mode rejection ratio] | [DATA_NEEDED: common-mode rejection ratio] |
| Single-Supply Operation | — | Supported |
| Bandwidth | — | 800 kHz |
| Slew Rate | — | 0.3 V/µs |
| Input Offset Voltage | — | 100 µV maximum |
| Number of Amplifiers | — | 1 circuit |
| ピン数 | — | 8 pins |
| 実装タイプ | — | Through-hole PDIP |
| 電源電流 | — | [DATA_NEEDED: supply current] |
| Input Common-Mode Range | — | [DATA_NEEDED: input common-mode range] |
| 出力電圧範囲 | — | [DATA_NEEDED: output voltage range] |
| Noise | — | [DATA_NEEDED: input noise] |