AD623ANZ vs AD623BNZ 对比
详细并排对比 AD623ANZ 出自 Analog Devices 和 AD623BNZ 出自 Analog Devices。对比关键规格、电气参数、封装、生命周期状态、价格和供货情况,以确定最适合您设计需求的元器件。
规格对比
| 参数 | AD623ANZ | AD623BNZ |
|---|---|---|
| 品牌 | Analog Devices | Analog Devices |
| 分类 | Amplifier ICs | Amplifier ICs |
| 生命周期状态 | 有效 | 有效 |
| Product Type | Instrumentation amplifier | Single-circuit instrumentation amplifier |
| Number of Circuits | 1 circuit | — |
| Supply Voltage Range | 2.7 V to 12 V | 2.7 V to 12 V |
| Single-Supply Configuration | 3 V to 12 V | — |
| Dual-Supply Operation | Supported | Supported |
| Output Swing | Rail-to-rail | Rail-to-rail |
| Gain Programming | Single external gain-set resistor | User-programmable resistor |
| 封装 | 8-PDIP | 8-pin PDIP |
| Lead Count | 8 leads | — |
| Input Signal | Differential | — |
| Common-Mode Handling | Instrumentation-amplifier input | — |
| Power Class | Low-cost, low-power instrumentation amplifier | — |
| Product Class | Rail-to-rail instrumentation amplifier | — |
| Pin Configuration | Industry-standard 8-lead instrumentation-amplifier configuration | — |
| RoHS 状态 | Unknown | [DATA_NEEDED: RoHS status] |
| REACH Status | Unknown | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | Not applicable | [DATA_NEEDED: AEC-Q100 qualification] |
| 工作温度范围 | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| Gain Bandwidth | [DATA_NEEDED: gain bandwidth] | — |
| Input Noise Density | [DATA_NEEDED: input noise density] | — |
| Common-Mode Rejection Ratio | [DATA_NEEDED: common-mode rejection ratio] | [DATA_NEEDED: common-mode rejection ratio] |
| Single-Supply Operation | — | Supported |
| Bandwidth | — | 800 kHz |
| Slew Rate | — | 0.3 V/µs |
| Input Offset Voltage | — | 100 µV maximum |
| Number of Amplifiers | — | 1 circuit |
| 引脚数量 | — | 8 pins |
| 安装类型 | — | Through-hole PDIP |
| 电源电流 | — | [DATA_NEEDED: supply current] |
| Input Common-Mode Range | — | [DATA_NEEDED: input common-mode range] |
| 输出电压范围 | — | [DATA_NEEDED: output voltage range] |
| Noise | — | [DATA_NEEDED: input noise] |