AD623ANZ vs AD623BNZ 比較
詳細並排比較 AD623ANZ 由 Analog Devices 與 AD623BNZ 由 Analog Devices. 比較關鍵規格、電氣參數、封裝、生命週期狀態、價格與供貨情況,以找出最符合您設計需求的元件。
規格比較
| 參數 | AD623ANZ | AD623BNZ |
|---|---|---|
| 品牌 | Analog Devices | Analog Devices |
| 類別 | Amplifier ICs | Amplifier ICs |
| 生命週期狀態 | 啟用中 | 啟用中 |
| Product Type | Instrumentation amplifier | Single-circuit instrumentation amplifier |
| Number of Circuits | 1 circuit | — |
| Supply Voltage Range | 2.7 V to 12 V | 2.7 V to 12 V |
| Single-Supply Configuration | 3 V to 12 V | — |
| Dual-Supply Operation | Supported | Supported |
| Output Swing | Rail-to-rail | Rail-to-rail |
| Gain Programming | Single external gain-set resistor | User-programmable resistor |
| 封裝 | 8-PDIP | 8-pin PDIP |
| Lead Count | 8 leads | — |
| Input Signal | Differential | — |
| Common-Mode Handling | Instrumentation-amplifier input | — |
| Power Class | Low-cost, low-power instrumentation amplifier | — |
| Product Class | Rail-to-rail instrumentation amplifier | — |
| Pin Configuration | Industry-standard 8-lead instrumentation-amplifier configuration | — |
| RoHS 狀態 | Unknown | [DATA_NEEDED: RoHS status] |
| REACH Status | Unknown | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | Not applicable | [DATA_NEEDED: AEC-Q100 qualification] |
| 工作溫度範圍 | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| Gain Bandwidth | [DATA_NEEDED: gain bandwidth] | — |
| Input Noise Density | [DATA_NEEDED: input noise density] | — |
| Common-Mode Rejection Ratio | [DATA_NEEDED: common-mode rejection ratio] | [DATA_NEEDED: common-mode rejection ratio] |
| Single-Supply Operation | — | Supported |
| Bandwidth | — | 800 kHz |
| Slew Rate | — | 0.3 V/µs |
| Input Offset Voltage | — | 100 µV maximum |
| Number of Amplifiers | — | 1 circuit |
| 腳位數 | — | 8 pins |
| 安裝類型 | — | Through-hole PDIP |
| 供應電流 | — | [DATA_NEEDED: supply current] |
| Input Common-Mode Range | — | [DATA_NEEDED: input common-mode range] |
| 輸出電壓範圍 | — | [DATA_NEEDED: output voltage range] |
| Noise | — | [DATA_NEEDED: input noise] |