AD623ANZ vs AD623BNZ 비교
다음의 상세 나란히 비교: AD623ANZ 제조: Analog Devices 및 AD623BNZ 제조: Analog Devices. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.
사양 비교
| 파라미터 | AD623ANZ | AD623BNZ |
|---|---|---|
| 브랜드 | Analog Devices | Analog Devices |
| 카테고리 | Amplifier ICs | Amplifier ICs |
| 수명 주기 상태 | 활성 | 활성 |
| Product Type | Instrumentation amplifier | Single-circuit instrumentation amplifier |
| Number of Circuits | 1 circuit | — |
| Supply Voltage Range | 2.7 V to 12 V | 2.7 V to 12 V |
| Single-Supply Configuration | 3 V to 12 V | — |
| Dual-Supply Operation | Supported | Supported |
| Output Swing | Rail-to-rail | Rail-to-rail |
| Gain Programming | Single external gain-set resistor | User-programmable resistor |
| 패키지 | 8-PDIP | 8-pin PDIP |
| Lead Count | 8 leads | — |
| Input Signal | Differential | — |
| Common-Mode Handling | Instrumentation-amplifier input | — |
| Power Class | Low-cost, low-power instrumentation amplifier | — |
| Product Class | Rail-to-rail instrumentation amplifier | — |
| Pin Configuration | Industry-standard 8-lead instrumentation-amplifier configuration | — |
| RoHS 상태 | Unknown | [DATA_NEEDED: RoHS status] |
| REACH Status | Unknown | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | Not applicable | [DATA_NEEDED: AEC-Q100 qualification] |
| 동작 온도 범위 | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| Gain Bandwidth | [DATA_NEEDED: gain bandwidth] | — |
| Input Noise Density | [DATA_NEEDED: input noise density] | — |
| Common-Mode Rejection Ratio | [DATA_NEEDED: common-mode rejection ratio] | [DATA_NEEDED: common-mode rejection ratio] |
| Single-Supply Operation | — | Supported |
| Bandwidth | — | 800 kHz |
| Slew Rate | — | 0.3 V/µs |
| Input Offset Voltage | — | 100 µV maximum |
| Number of Amplifiers | — | 1 circuit |
| 핀 수 | — | 8 pins |
| 실장 유형 | — | Through-hole PDIP |
| 공급 전류 | — | [DATA_NEEDED: supply current] |
| Input Common-Mode Range | — | [DATA_NEEDED: input common-mode range] |
| 출력 전압 범위 | — | [DATA_NEEDED: output voltage range] |
| Noise | — | [DATA_NEEDED: input noise] |