BTS3035TFATMA1 vs BTS3060TFATMA1 比較
詳細な並列比較: BTS3035TFATMA1 メーカー: Infineon および BTS3060TFATMA1 メーカー: Infineon。主要仕様、電気的特性、パッケージ、ライフサイクルステータス、価格、在庫状況を比較して、設計要件に最適な部品を判断してください。
仕様比較
| パラメータ | BTS3035TFATMA1 | BTS3060TFATMA1 |
|---|---|---|
| ブランド | Infineon | Infineon |
| カテゴリ | Power MOSFET Drivers | Power MOSFET Drivers |
| ライフサイクル状態 | 有効 | 有効 |
| 在庫状況 | In Stock | In Stock |
| 単価（USD） | $0.61 | $0.65 |
| Product Type | Low-Side Power Switch | Smart Low-Side Power Switch |
| Technology | N-Channel MOSFET | — |
| Number of Channels | 1 | 1 |
| Input Type | CMOS Logic Level | Logic-level gate input (3.3V / 5V compatible) |
| Continuous Drain Current | 5 A | — |
| On-Resistance (RDS(on)) | 30 mOhm (typical) | — |
| Drain-Source Voltage (VDS) Max | 40 V | — |
| Operating Voltage Range | 12 V nominal (load-dump tolerant to 40 V) | — |
| Fault Protection | Over-current, Short-circuit, Over-temperature, ESD | — |
| Status Feedback | Yes (open-drain diagnostic output) | — |
| Reverse Battery Protection | Integrated | — |
| 動作温度範囲 | -40C to +150C (junction) | -40°C to +150°C (junction) |
| パッケージ | PG-TO252-3-313 (DPAK) | PG-TO252-3 (DPAK), 3 pins (2+Tab) |
| 実装タイプ | Surface Mount | Surface Mount |
| MSLレベル | [DATA_NEEDED: MSL moisture sensitivity level] | — |
| RoHS ステータス | Compliant | Compliant |
| Automotive Grade | AEC-Q100 qualified | — |
| Manufacturer Family | — | HITFET |
| On-Resistance (RDS(on) typ) | — | 50 mΩ at 25°C |
| Maximum Continuous Load Current | — | 3 A |
| Maximum Load Supply Voltage | — | 42 V |
| トランジスタタイプ | — | N-Channel Vertical Power MOSFET (monolithically integrated) |
| Switch Configuration | — | Low-Side, 1:1 |
| Diagnostic Output | — | Status pin (open-drain, requires pull-up) |
| Embedded Protection | — | Overcurrent, Overtemperature, Overvoltage, Open-load detection |
| Automotive Qualification | — | AEC-Q100 qualified |
| Packaging | — | Tape & Reel (TF suffix) |