MPXV2010GP vs MPX2010DP 比較

詳細な並列比較: MPXV2010GP メーカー: STMicroelectronics および MPX2010DP メーカー: NXP Semiconductors。主要仕様、電気的特性、パッケージ、ライフサイクルステータス、価格、在庫状況を比較して、設計要件に最適な部品を判断してください。

STMicroelectronics
MPXV2010GP MPXV2010GP - 10kPa Vented Gauge Pressure Sensor | STMicroelectronics

MPXV2010GP - 10kPa Vented Gauge Pressure Sensor | STMicroelectronics

MPXV2010GP ✓ 生産中
NXP Semiconductors
MPX2010DP MPX2010DP - 10 kPa Differential Pressure Sensor | NXP/STMicro

MPX2010DP - 10 kPa Differential Pressure Sensor | NXP/STMicro

MPX2010DP ✓ 生産中

仕様比較

パラメータ MPXV2010GP MPX2010DP
ブランド STMicroelectronics NXP Semiconductors
カテゴリ Pressure Sensors Pressure Sensors
ライフサイクル状態 有効 有効
在庫状況 In Stock In Stock
単価(USD) $8.62 $8.50
Pressure Type Vented Gauge —
Operating Pressure Range 0 kPa to 10 kPa —
Maximum Overload Pressure 75 kPa —
Supply Voltage (Vex) 10 V typical (max 16 V) —
Full-Scale Output (Span) at 10 V 25 mV nominal at 10 kPa —
Zero Pressure Output (Offset) 0 mV to 1.0 mV —
Pressure Hysteresis 1.0 kPa (typical) —
Sensitivity 2.5 mV/kPa nominal at 10 V —
Response Time 1.0 ms (typical) 1.0 ms (typical)
出力タイプ Analog, ratiometric, mV output Analog voltage, Wheatstone bridge (mV level)
動作温度 -40 C to +125 C -40 °C to +125 °C
Port Configuration Single vertical side port, 0.13" (3.17 mm) tube Dual ports (differential), 0.19 inch / 4.93 mm tubes
パッケージ 8-SMD, Gull Wing, Side Port (Case 344B-01) —
実装タイプ Surface Mount —
Technology Silicon piezoresistive MEMS, on-chip temp compensated Piezoresistive (silicon strain gauge bridge)
RoHS ステータス Compliant Compliant
センサタイプ — Differential Pressure Sensor
Pressure Range — 0 to 10 kPa (0 to 1.45 PSI)
Typical Full-Scale Span — 25 mV at 10 V excitation
Zero Pressure Offset — 0 mV nominally (±1.0 mV max)
電源電圧 — 10 V DC typical (max 16 V)
Linearity — ±0.05% (typ)
Temperature Compensation — 0 °C to +85 °C (on-chip)
Maximum Overpressure — 75 kPa
Burst Pressure — 200 kPa
Package / Mounting — 4-SIP Module (through-hole with axial tubes)
Media Compatibility — Dry air or non-corrosive gas

データシート&リソース

すべての製品を閲覧 BOMを作成 見積もり依頼