MPXV2010GP vs MPX2010DP Comparaison
Comparaison détaillée côte à côte de MPXV2010GP par STMicroelectronics et MPX2010DP par NXP Semiconductors. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
STMicroelectronics
MPXV2010GP - 10kPa Vented Gauge Pressure Sensor | STMicroelectronics
MPXV2010GP ✓ Actif
Comparaison des spécifications
| Paramètre | MPXV2010GP | MPX2010DP |
|---|---|---|
| Marque | STMicroelectronics | NXP Semiconductors |
| Catégorie | Pressure Sensors | Pressure Sensors |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $8,62 | $8,50 |
| Pressure Type | Vented Gauge | — |
| Operating Pressure Range | 0 kPa to 10 kPa | — |
| Maximum Overload Pressure | 75 kPa | — |
| Supply Voltage (Vex) | 10 V typical (max 16 V) | — |
| Full-Scale Output (Span) at 10 V | 25 mV nominal at 10 kPa | — |
| Zero Pressure Output (Offset) | 0 mV to 1.0 mV | — |
| Pressure Hysteresis | 1.0 kPa (typical) | — |
| Sensitivity | 2.5 mV/kPa nominal at 10 V | — |
| Response Time | 1.0 ms (typical) | 1.0 ms (typical) |
| Type de sortie | Analog, ratiometric, mV output | Analog voltage, Wheatstone bridge (mV level) |
| Température de fonctionnement | -40 C to +125 C | -40 °C to +125 °C |
| Port Configuration | Single vertical side port, 0.13" (3.17 mm) tube | Dual ports (differential), 0.19 inch / 4.93 mm tubes |
| Boîtier | 8-SMD, Gull Wing, Side Port (Case 344B-01) | — |
| Type de montage | Surface Mount | — |
| Technology | Silicon piezoresistive MEMS, on-chip temp compensated | Piezoresistive (silicon strain gauge bridge) |
| Statut RoHS | Compliant | Compliant |
| Type de capteur | — | Differential Pressure Sensor |
| Pressure Range | — | 0 to 10 kPa (0 to 1.45 PSI) |
| Typical Full-Scale Span | — | 25 mV at 10 V excitation |
| Zero Pressure Offset | — | 0 mV nominally (±1.0 mV max) |
| Tension d'alimentation | — | 10 V DC typical (max 16 V) |
| Linearity | — | ±0.05% (typ) |
| Temperature Compensation | — | 0 °C to +85 °C (on-chip) |
| Maximum Overpressure | — | 75 kPa |
| Burst Pressure | — | 200 kPa |
| Package / Mounting | — | 4-SIP Module (through-hole with axial tubes) |
| Media Compatibility | — | Dry air or non-corrosive gas |